Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the unit and/or
any devices that connect to it.
This package contains:
M 1 CS-521 or CS-522 Two Port Petite KVM Switch with Attached Cables
M 1 User Manual
M 1 Quick Start Guide
Manual Part No. PAPE-1236-1AT
Printed in Taiwan 06/2003
All brand names and trademarks are the registered property of their respective owners.
2003-06-24
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, may cause
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
M Reorient or relocate the receiving antenna;
M Increase the separation between the equipment and
receiver;
M Connect the equipment into an outlet on a circuit different
from that which the receiver is connected;
M Consult the dealer or an experienced radio/television
technician for help.
2003-06-24
Overview
The CS-521 or CS-522 KVM Switch is a control unit that allows
access to two computer systems from a single console
(keyboard, monitor, and mouse).
The CS-521 / CS-522 improves on previous models with a 50%
smaller desktop footprint plus built-in custom KVM cables for
trouble-free installation and a neat and tidy workspace.
For increased efficiency and cable compactness, each of the
CS-522’s cables use a USB connector (rather than two PS/2
connectors) to transfer keyboard and mouse input to the
computer.
For backward compatibility, only one of the CS-521’s cables
uses a USB connector. Its other cable uses the traditional two
PS/2 connectors to transmit keyboard and mouse input.
Recognizing the increased importance of sound, the CS-521 /
CS-522 is speaker enabled. You can listen to the audio output
of both computers (one at a time) on a single set of speakers
attached the the Switch.
Setup is fast and easy; plugging cables into their appropriate
ports is all that is entailed. There is no software to configure, no
installation routines, and no incompatibility problems. Since the
CS-521 / CS-522 intercepts keyboard input directly, it works on
any hardware platform and with all operating systems. The
KVM focus is switched among the computers by means of
simple Hot Key combinations entered from the keyboard.
There is no better way to save time and money than with a
CS-521 / CS-522 installation. By allowing a single console to
manage both computers, the CS-521 / CS-522 eliminates the
expense of purchasing a separate keyboard, monitor, and
mouse for each. Additionally, it saves the extra space they
would take up, and eliminates the inconvenience and wasted
effort involved in constantly having to move from one computer
to the other.
- 1 -
2003-06-24
Features
One console controls two computers
M
Compact design features two attached KVM (keyboard,
M
video, mouse, and speaker) cables
USB connection transfers keyboard and mouse input to both
M
computers (CS-522)
USB connection transfers keyboard and mouse input to one
M
of the computers; PS/2 connection transfers keyboard and
mouse input to the other (CS-521)
Speaker enabled
M
Easy to install - no software required - connecting cables to
M
the computers is all it takes
Easy to operate - computer selection via Hotkeys - Auto
M
Scan function to monitor computer operation
Hot pluggable - add or remove computers for maintenance
M
without powering down the switch
LED display for easy status monitoring
M
Caps Lock, Num Lock, and Scroll Lock states are saved and
M
restored when switching
Keyboard and mouse emulation for error free computer
M
booting
Supports Microsoft IntelliMouse and the scrolling wheel on
M
most mice
Superior video quality - up to 2048 x 1536; DDC2B
M
Non-powered
M
Compatible with all operating platforms
M
- 2 -
2003-06-24
Hardware Requirements
Console
A VGA, SVGA, or Multisync monitor capable of the highest
M
resolution that you will be using on any computer in the
installation
A PS/2 Mouse
M
A PS/2 Keyboard
M
Computers
The following equipment must be installed on each computer
that is to be connected to the system:
A VGA, SVGA or Multisync card.
M
A 6-pin mini-DIN (PS/2 style) mouse port.
M
A 6-pin mini-DIN (PS/2 Style) keyboard port .
M
USB Type A port and Host Controller
M
Cables
For optimum signal integrity and to simplify the layout, two highquality integrated CS Custom KVM cables have been molded
into the CS-521 / CS-522 Switch. There is no need for a
separate cable purchase.
- 3 -
2003-06-24
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.