This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instruction manual, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that
which the receiver is connected;
Consult the dealer/an experienced radio/television technician for help.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
ii
CS1182 / CS1184 User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://support.aten.com
North Americahttp://www.aten-usa.com/product_registration
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-10-5255-0110
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
United Kingdom44-8-4481-58923
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
ATEN and the ATEN logo are registered trademarks of ATEN Internatio nal Co., Ltd. All rights rese rved.
All other brand names and trademarks are the registered property of their respective owners.
Package Contents
The CS1182 / CS1184 package consists of:
1 CS1182 / CS1184 USB DVI Secure KVM Switch
1Power Cord
1 User Manual*
1 Quick Start Guide
Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the switch or to any other
devices on the CS1182 / CS1184 installation.
* Features may have been added to the CS1182 / CS1184 since this manual
was printed. Please visit our website to download the most up to date version
of the manual.
This User Manual is provided to help you get the most from your CS1182 /
CS1184 system. It covers all aspects of installation, configuration and
operation. An overview of the information found in the manual is provided
below.
Overview
Chapter 1, Introduction, introduces you to the CS1182 / CS1184 System.
Its purpose, features and benefits are presented, and its front and back panel
components are described.
Chapter 2, Hardware Preparative Procedure, provides step-by-step
instructions for setting up your installation.
Chapter 3, Operation, explains the concepts involved in operating the
CS1182 / CS1184.
An Appendix, provides specifications and other technical information
regarding the CS1182 / CS1184.
vii
CS1182 / CS1184 User Manual
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means
to press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential
steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
to open the Start menu, and then select Run.
Indicates critical information.
Product Information
→ Run means
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
viii
Chapter 1
Introduction
Overview
The ATEN CS1182 / CS1184 2/4-port USB DVI Dual-Link Secure KVM
Switch offers secure and reliable access for any government/military desktop
environment where security is imperative by providing safe switching between
computers operating on different secure networks. NIAP-certified to EAL2+,
the CS1182 / CS1184 provides 2-port / 4-port models for secure desktop
workstation use.
Hardware security includes tamper-evident tape, chassis intrusion detection,
and tamper-proof hardware, while software security includes restricted USB
connectivity – non HIDs (Human Interface Devices) are ignored when
switching – an isolated channel per port that makes it impossible for data to be
transferred between secure and unsecure computers, and automatic clearing of
the keyboard and mouse buffer.
By combining physical security with controlled USB connectivity, the CS1182
/ CS1184 gives you the means to consolidate multiple workstations of various
security classification levels with one keyboard, monitor and mouse (KVM)
console.
Note: 1. The National Information Assurance Partnership (NIAP) is a United
States government initiative to meet the security testing needs of IT
consumers and manufacturers. It is operated by the National Security
Agency (NSA) and the National Institute of Standards and
Technology (NIST).
2. The CS1182 / CS1184 additionally satisfies Evaluati on Assurance
Level 2 (EAL2+) requirements for Peripheral Sharing Switch (PSS)
for Human Interface Devices Protection Profile v2.1.
1
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.