Aten 2X-031G Installation Guide

KE Series Single Rack Mount Kit - 2X-031G

Installation Guide

This single rack mounting kit installs one KE Series unit in 1U of server rack space.

Package Contents:

1 x right mounting bracket 1 x left mounting bracket 2 x flat head screws 2 x pan head screws

Installation:

1. Remove the screws and plastic guards from the KE Series receiver unit.

MISC00000271 03/2021 V3.0

2. Remove the bottom and side screws from the KE Series transmitter unit.

KE Series Single Rack Mount Kit - 2X-031G

Installation Guide

3. Use the flat head and pan head screws provided to install the right and left mounting brackets. The example used in the diagram below is a KE Sereis transmiiter unit, the proceudre for connecting to a receiver unit is identical.

pan head screws

flat head screws

4. Screw the mounting brackets to the rack. The example used in the diagram below is a KE Sereis transmiiter unit, the proceudre for connecting to a receiver unit is identical.