Atech Tech LIBRA-02 M, LIBRA-02 HM User Manual
LIBRA-02 M / LIBRA-02 HM
COPY ROUTER
User's Manual
1
Operating and Safety Instructions
CONTENTS Page
1. General Information 3
1.1. Introduction 3
1.2. Manufacturer 3
2. Machine’s Description and Purpose of Use 3
2.1. Machine’s description 3
2.2. Technical features 5
2.3. Overall dimensions 6
2.4. Part lists and technical drawings 7
3. Safety 9
3.1. Safety information 9
3.2. Prevention of accidents 10
3.3. General safety information 10
4. Transport of the machine 12
5. Installation of the machine 12
5.1. Preparation 12
5.2. Electric connection 14
6. Machine’s safety information 14
7. Operation 15
7.1. Starting to work 15
8. Changing the router bit and the drill bits 16
9. Adjusting the air pressure 17
10. Maintenance 19
10.1. Periodic controls and routine maintenance
at the end of the day 19
11. Information about faulty use 19
11. Electric / pneumatic components 20
11.1. Electric Components 20
11.2. Pneumatic Components 20
12. Troubleshooting 21
2
Operating and Safety Instructions
1. GENERAL INFORMATION
1.1. INTRODUCTION
The user’s manual given by the manufacturer contains necessary information about the
machine parts. Each machine operator should read these instructions carefully, and the
machine should be operated after fully understanding them.
Safe and efficient use of the machine for long term depends on understanding and
following the instructions contained in this manual. The technical drawings and details
contained in this manual constitute a guide for the operator.
1.2. DISTRIBUTOR
ATech Machine, Inc.
429 E. Diamond Ave. #F – Gaithersburg, MD 20877 USA
Phone: +1-301-556-9789 Toll Free: 1-866-80A-TECH Fax: +1-301-542-0140
Website: www.atechna.com E-mail: info@atechna.com
In case of any technical problem please contact your nearest ATECH dealer through the
above mentioned phone, fax or e-mail address.
Technical labels with the model description of the machine are fixed onto the front side
of each machine.
The machine’s serial number and manufacturing year are stipulated on the technical
label.
2. MACHINE’S DESCRIPTION AND PURPOSE OF USE
2.1. MACHINE’S DESCRIPTION
The copy router machines are designed to open lock, handle, hinge and window
fastening slots onto PVC and Aluminum profiles.
Channels in different dimensions can be opened independently from copying.
LIBRA-02 M : Clamping is pneumatically.
LIBRA-02 HM: Triple drilling unit on the horizontal axis in addition to the copying
mechanism.
3
Operating and Safety Instructions
Please mention the below mentioned data in all your correspondence regarding the
machine with the manufacturer and/or your ATECH dealer.
*Machine model
*Machine’s serial number
*Voltage and frequency
*Name of dealer where machine was purchased
*Date of purchase
*Description of the machine fault
*Average daily operation period
4
Operating and Safety Instructions
2.2. TECHNICAL FEATURES
Technical
Features
(American)
LIBRA-02 M
LIBRA-02 HM
Technical
Features
(Metric)
110V/220V 60Hz
220V/440V 60Hz
800W/1200W
800W
14000 rpm
14000 rpm 3000 rpm 90-120 psi 26x26x54" 210 lb
--- 90 psi 24x22x57" 160 lb
5
Operating and Safety Instructions
2.3. OVERALL DIMENSIONS
Figure-1
6
Operating and Safety Instructions
2.4. PART LISTS AND TECHNICAL DRAWINGS
7
Operating and Safety Instructions
Figure-3
Loading...