WavePro Oscilloscopes
Specifications
Vertical System
Input Channels
Analog Bandwidth @ 50
Ohms (-3 dB)
Bandwidth Limiters 20 MHz, 200 MHz
Input Impedance 50 Ohms ± 1.5%; 10 MOhms // 11 pF typical (using PP005 probe)
Input Coupling 1 MOhms : AC, DC, GND; 50 Ohms : DC, GND
Maximum Input 50 Ohms : 5 Vrms; 1 MOhms : 100 Vmax (peak AC =5 kHz + DC)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ohms : 1 mV – 1 V/div fully variable ; 1 MOhms : 1 mV – 2 V/div fully variable
DC Accuracy ± 2.0% full scale + 1.5% offset value @ gain > 10 mV
Offset Accuracy ± (1.5% + 0.5% of full scale + 1 mV)
Offset Range 50 Ohms or 1 MOhms : 1 mV – 4.99 mV/div: ±400 mV
Isolation — Channel-toChannel
WavePro 960
DISCONTINUED
44 4
2 GHz* 1 GHz 500 MHz
50 Ohms : 5 mV – 99 mV/div: ±1 V; 0.1 V – 1 V/div: ±10 V
1 MOhms: 5 mV – 100 mV/div: ±1 V; 101 mV – 2 V/div: ±20 V
> 250:1 at same V/div settings
WavePro 950
DISCONTINUED
WavePro 940
DISCONTINUED
Timebase System
Timebases Main and up to four independent zoom traces simultaneously
Ranges 200 ps/div – 1000 s/div
Clock Accuracy =10 ppm
Interpolator Resolution 5 ps
External Clock Frequency 500 MHz maximum, 50 Ohms, or 1 MOhms impedance
Roll Mode – Operating Range time/div 500 ms – 1000 s/div or sample rate < 100 kS/s max
External Reference 10 MHz timebase reference clock available with input on rear panel
External Timebase Clock 500 MHz maximum external sample clock input on front panel EXT BNC
Acquisition System
Single-Shot Sample Rate
1 Channel Max. 16 GS/s 16 GS/s 8 GS/s
2 Channels Max. 8 GS/s 8 GS/s 8 GS/s
3 – 4 Channels Max. 4 GS/s 4 GS/s 4 GS/s
Maximum Acquisition
Points/Ch
Standard 1M / 500k / 250k 1M / 500k / 250k 1M / 500k / 250k
M – Memory Option 4M / 2M / 1M 4M / 2M / 1M 4M / 2M / 1M
L – Memory Option 16M / 8M / 4M 16M / 8M / 4M 16M / 8M / 4M
VL – Memory Option 32M / 16M / 8M 32M / 16M / 8M 32M / 16M / 8M
XL – Memory Option 64M / 32M / 16M – –
Acquisition Modes
( 1 Ch) / (2 Ch) / ( 3 – 4 Ch)
Random Interleaved
Sampling (RIS)
Single-Shot For transient and repetitive signals: 200 ps/div – 1000 s/div
Sequence 2 – 8000 segments
Intersegment Time Typically 30 µs
Acquisition Processing
Averaging
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, roof for up to 106 sweeps
Triggering System
Modes Normal, Auto, Single, and Stop
Sources
Continuous averaging up to 106 sweeps with weighting range from 1:1 to 1:1023 (option).
Any input channel, external, Ext/5 or line; slope, level, and coupling unique to each source (except line
trigger)
50 GS/s for repetitive signals: 200 ps/div – 1 µs/div
Summed averaging to 103 sweeps (standard).
Slope Positive, Negative, Window
Coupling modes DC, AC, HF, HFREJ, LFREJ
AC Cutoff
Frequency
HFREJ, LFREJ
Pre-trigger delay 0 – 100% of horizontal time scale
Post-trigger delay 0 – 10000 divisions
Hold-off by time or events Up to 20s or from 1 to 99 999 999 events
Internal trigger range ±5 div
Max trigger frequency 1 GHz (DC, AC), >1 GHz (HF) on WavePro 950, >2.0 GHz (HF) on WavePro 960
External trigger input range ±0.5 ( ±2.5 V with Ext/5 selected )
Maximum ext. input @ 50
Ohms
7.5 Hz Typical
50 kHz typical
±5 V DC or 5Vrms
Maximum ext. input @ 1
MOhms
Automatic setup
Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
100 Vmax ( DC + peak AC < 5 kHz )
Vertical Find Automatically sets the vertical sensitivity and offset for the select ed channels to display a waveform
Probes
Model PP005 10 : 1, 10 MOhms with autodetect (one per channel)
Probe System: Probus® Automatically detects and supports a wide variety of differential amplifiers; active, high-voltage,
Scale Factors Up to 12 automatically or manually selected
Color Waveform Display
Type Color 10.4" flat-panel TFT-LCD
Resolution VGA 640 x 480 pixels
Screen Saver Display blanks after 10 minutes (when screen saver is “on”)
Real Time Clock Da t e , ho urs, m inu te s , and se co nd s di spla ye d with w av efor m
with maximum dynamic range
current, and
differential probes
Number of Traces Display a maximum of eight traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY; Full Screen gives enlarged view of each style.
Intensity Controls Separate intensity control for grids and waveforms
Waveform Styles Sample dots joined or dots only — regular or bold sample point highlighting.
Trace Overlap Display Select opaque or transparent mode with automatic waveform overlap management.
Analog Persistence Display
Analog & Color-Graded
Persistence
Trace Selection Activate Analog Persistence on a selected trace, top 2 traces, or all traces.
Persistence Aging Time Select from 500 ms to infinity.
Trace Display Opaque or transparent overlap
Sweeps Displayed All accumulated or all accumulated with last trace highlighted
Variable saturation levels; stores each trace’s persistence data in memory.
Zoom Expansion Traces
Display up to Four Zoom
Traces
Vertical zoom up to 5X expansion, 50X with averaging
Horizontal zoom expand to 2 pts/div, magnify to 50000X
Auto Scroll automatically scans and displays any zoom or math trace.
Rapid Signal Processing
Processor PowerPC
Processing Memory Up to 256 Mbytes
Realtime Clock Dates, hours, minutes, seconds
Internal Waveform Memory
Waveform M1, M2, M3, M4 (Store full-length waveforms with 16 bits/data point)
Zoom and Math Four traces A, B, C, D with chained trace capability
Setup Storage
Front Panel and Instrument
Status
CustomDSO Customize and access scope settings with up to 6 CustomDSO files stored in non-volatile Virtual Disk
Interface
Remote Control Full control of all front panel controls and internal functions via RS232C, GPIB, or Ethernet
RS-232-C Asynchronous transfer rate of up to 115.2 kbaud
GPIB Port Full control via IEEE – 4888.2; configurable as talker/listener for computer control and data transfer
Ethernet (optional) 10 BaseT Ethernet inter fa ce
Floppy Drive Internal, DOS-format, 3.5" high-density
PC Card Slot (optional) Supports memory and hard drive cards
External Monitor Port
Standard
Centronics Port Parallel printer interface
Internal Graphics Printer
(optional)
Pass/Fail and Trigger Output Front panel Cal BNC output provides choice of Cal Signal, Pass/Fail Condition, Trigger Ready, or Trigger
Four non-volatile memories and floppy drive are standard. Hard drive and memory card are optional.
(VDisk).
15-pin D-Type VGA-compatible
Hard copy output in <10 seconds or strip chart mode up to 200 cm/div
Out signals
Outputs
Calibrator Signal 500 Hz – 2 MHz square wave or 25 ns pulse; 0.05 to +1.0 Volt into 1 MOhms output on front panel
Control Signals Trigger ready, trigger out, pass/fail status.
BNC
Environmental and Safety
Operating Conditions
Temperature
Humidity
Altitude
CE Approved
EMC EMC Directive 89/336/EEC; EN 61326-1 Emissions and Immunity
Safety Low Voltage Directive 73/23/EEC; EN 61010-1 Product Safety (Installation Category II, Pollution
UL and cUL approved UL Standard UL 3111-1
Service
5 – 40 °C rated accuracy (41 to 104 °F)
0 – 45 °C operating
-20 – 60 °C non-operating
75% max relative humidity, non-condensing at 45 °C
3 000 meters (10 000 feet) operating at 25 °C 4 500 meters (15 000 feet) non-operating
Degree 2)
cUL Standard CSA-C22.2 No. 1010-1
LeCroy service programs include unique service upgrades for LeCroy oscilloscopes, metrology modules
customized for your company, and more. Whether you own one LeCroy instrument or hundreds,
whether you need prompt attention from our service offices or an onsite service contract, LeCroy is
committed to your success. Call your LeCroy service representative to discuss your company’s specific
requirements.
General
Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum
Auto Calibration time <500 ms
Power Requirements 90 – 132 V AC at 45-440 Hz; 180–250 V AC at 45-66 Hz; Power consumption:350 VA max
Battery Backup Front panel settings retained for two years minimum
Warranty and Calibration Three years; calibration recommended yearly
Physical Dimensions
Dimensions (HWD) 264 mm x 397 mm x 453 mm; 10.4" x 15.65" x 17.85" (height excludes feet)
Weight 14 kg; 31 lbs (with internal printer)
Shipping Weight 22.2 kg; 49 lbs
*with sample speeds > 4 GS/s
Loading...