Atec VSS-500N10 User Manual
DATA SHEET > VSS 500N10 > 20130627
VSS 500N10
VOLTAGE SURGE SIMULATOR
FOR TESTS ACCORDING TO ...
> EN 60065
> EN 60950-1
> IEC 60065
> IEC 60950-1
> UL 6500
VOLTAGE SURGE SIMULATION
As per safety test requirements the insulation between accessible parts or parts connected to them and hazardous live parts
shall be able to withstand surges due to transients, caused e.g. by lightning events and entering the apparatus through the
antenna terminal. The voltage surge simulator VSS 500N10 generates high voltage transients as required by EN/IEC 60065
and UL 6500 standards for safety tests on audio, video and similar electronic apparatus.
Such test is also required by EN/IEC 60950-1 for safety testing of Information Technology equipment.
HIGHLIGHTS
> Surge voltage up to 10kV
> Generator designed to comply with IEC 60065
> Generator designed to comply with UL 6500
> Interlock
> Warning lamp control
> Manual operation
> USB (optical link) and GPIB interface
APPLICATION AREAS
COMPONENTS
INDUSTRY
RESIDENTIAL
BROADCAST
TELECOM
www.emtest.com © EM TEST > PAGE 1/3
DATA SHEET > VSS 500N10 > 20130627
TECHNICAL DETAILS
VOLTAGE SURGE SIMULATOR, PULSE AS PER IEC 60065
Voltage (o.c.) 500V - 10,000V ± 10%
Surge capacitor 1nF
Series resistor 1,000ohm
Parallel resistor >15Mohm
Polarity Positive
Event counter 1 - 30,000 or endless
TRIGGER
Automatic Automatic pulse release
Manual Single pulse release
External External pulse release
CRO trigger 5V trigger signal for oscilloscope
Pulse repetition
max. 1Hz (1s - 999s)
rate
OUTPUT
Direct Via HV connector; Zi = 1,000ohm
TEST ROUTINES
Quick Start Parameters online adjustable;
easy-to-use and fast
User Test routines Change Polarity after n pulses
Change voltage after n pulses
Service Service, set-up, self test
INTERFACE
Optical interface Opto link, 3 m cable
USB A connector
Parallel interface IEEE 488, addresses 1 - 30
SAFETY
Safety circuit Control input (24Vdc)
Warning lamp Floating output contact
GENERAL DATA
Dimensions,
19"/3HU, approx. 12kg
weight
Supply voltage 115/230V +10/-15%
Fuses 2 x 2AT (230V) or
2 x 4AT (115V)
www.emtest.com © EM TEST > PAGE 2/3
Loading...