R3132/3162-9E Jan. '02
Frequency
Frequency range:
Frequency reading accuracy:
(Start, stop, center frequency,
marker frequency)
Counter
Resolution:
Accuracy:
Frequency reference accuracy
Stability:
Frequency span
Range:
Accuracy:
Residual FM:
Signal purity:
*
RBW 300 Hz (Option 27)
Resolution bandwidth (3 dB)
Range:
Accuracy:
6 dB bandwidth:
Video bandwidth:
Amplitude range
Measuring range:
Maximum input level
(Input ATT 10 dB)
Preamplifier OFF:
Preamplifier ON:
Indication range:
Log:
Linear:
Reference level range
Preamplifier OFF:
Log:
Linear:
Preamplifier ON:
Log:
Linear:
Input ATT range:
Dynamic range
Average nose level:
Preamplifier OFF:
Preamplifier ON:
1 dB gain compression:
Preamplifier OFF:
Preamplifier ON:
Spurious response:
2nd-order harmonic
distortion:
2 signal 3rd-order
intermodulation distortion:
Residual response:
Preamplifier OFF:
Preamplifier ON:
9 kHz to 3 GHz
(Reading of frequency x Frequency reference
accuracy + Span x 1% + RBW x 15% + 60 Hz)
1 Hz to 1 kHz
(Marker frequency x Frequency reference accuracy
+ 1LSD)
(S/N 25 dB, span 200 MHz)
2 x 10-6/year, 1 x 10-7/year (Option 20)
1 x 10
-5
(0 to 50°C), 2 x 10-8/day (Option 20)
1 kHz to 3 GHz, 0 Hz (zero span)
1%
60 Hzp-p/0.1s, 20 Hzp-p/0.1s (Option 20)
offset f 2.6 GHz f >2.6 GHz
20 kHz -105 dBc/Hz -103 dBc/Hz
10 kHz -100 dBc/Hz* -98 dBc/Hz*
1 kHz to 3 MHz, 1-3-10 sequence
30 Hz, 100 Hz, 300 Hz (Option 27)
< 20%, 1 kHz to 1 MHz
< 25%, 3 MHz
< 20% (added with Option 27)
1 MHz, 120 kHz, 9 kHz
200 Hz (Option 27)
10 Hz to 3MHz, 1-3-10 sequence
+30 dBm to average noise level
+30 dBm, 50 VDC max.
+13 dBm, 50 VDC max.
10 x 10 div
10, 5, 2, 1 dB/div
10% of the reference level/div.
(Input ATT: 0 to 50 dB)
-64 to +40 dBm (0.1 dB step)
141.1 V to 22.36 V
(Input ATT: 0 to 30 dB)
-82 to +10 dBm (0.1 dB step)
17.76 V to 707.1 mV
0 to 50 dB (5 dB step)
RBW 1 kHz, VBW 10 Hz, input ATT 0 dB,
f 10 MHz
-117 dBm + 2f (GHz) dB
-132 dBm + 3f (GHz) dB
f 200 MHz
>0 dBm (mixer input level)
>-25 dBm (RF input level)
Preamplifier OFF, Mixer input -30 dBm
-70 dBc (100 MHz f <800MHz)
-80 dBc(f 800MHz)
-80 dBc (f 200 MHz, Offset >50 kHz)
When input ATT 0 dB, 50 terminated,
and 1 MHz to 3 GHz
-100 dBm
-105 dBm
After auto calibration at ATT = 10 dB
0.5 dB (100 kHz to 3 GHz)
2 dB (9 kHz to 3 GHz)
1 dB (100 kHz to 2.7 GHz)
2 dB (9 kHz to 3 GHz)
-20 dBm 0.3 dB
After auto calibration
< 0.5 dB
After auto calibration
1.5 dB/80 dB
1dB/10 dB
0.2 dB/1 dB
5% of reference level
0.3 dB (for 0 to 50 dB, with reference to
30 MHz/10 dB)
After auto calibration
< 0.5 dB
1.5 dB (REF = -50 to 0 dBm, ATT = 10 dB, 2 dB/div,
RBW = 300 kHz, f > 100 kHz, after auto calibration)
20 ms to 1000 s, 50 s to 1s (Option 29, zero span)
< 2%
FREE RUN, LINE, VIDEO, EXT, TV,
REPEAT, SINGLE
N type female
50 (nominal)
<1.5:1 (100 kHz to 2 GHz)
Input ATT = 10 to 50 dB
<2:1 (9 kHz to 3 GHz)
Input ATT = 5 to 50 dB
<2.5:1 (9 kHz to 3 GHz)
12 V, 4-pin connector
BNC female, 50 (nominal)
30 MHz, -20 dBm
BNC female, 500 (nominal)
-10 to +10 dBm
BNC female
Small monophonic jack
IEEE-488 BUS connector
D-sub 9-pin
D-sub 25-pin, ESC/P, ESC/P-R, PCL
VGA (15-pin, female)
3.5-inch, MS-DOS format
0 to +50 °C, Relative humidity 85% or less
(no dew condensation)
-20 to +60 °C, relative humidity 85% or less
100/200 VAC auto-switchable
100 VAC: 100 to 120 VAC, 50 to 60 Hz
200 VAC: 200 to 240 VAC, 50 to 60 Hz
200 VA or less
Approx. 424 (W) x 177 (H) x 300 (D) mm
(excluding feet and connectors)
14 kg or less
(excluding options, cover, and accessories)
Amplitude accuracy
Frequency response:
Preamplifier OFF:
Preamplifier ON:
Calibration signal level
accuracy:
IF gain error:
Scale indication accuracy:
Log:
Linear:
Input ATT switching error:
Resolution bandwidth
switching level error:
Total level accuracy:
Sweep
Sweep time:
Accuracy:
Trigger mode:
Sweep mode:
I/O
RF input
Connector:
Impedance:
VSWR
Preamplifier OFF:
Preamplifier ON:
Probe power:
Calibration output signal:
10 MHz reference input:
External trigger input:
Sound output
(demodulated audio):
GPIB interface:
RS232 interface:
Printer interface:
Video output:
Floppy disk:
General specifications
Operating temperature:
Storage temperature:
Power supply:
Power consumption:
Dimensions:
Mass:
R3132 Specifications
R3132/3162-9E Jan. '02
Frequency
Frequency range:
Frequency reading accuracy:
(Start, stop, center frequency,
marker frequency)
Counter
Resolution:
Accuracy:
Frequency reference accuracy
Stability:
Frequency span
Range:
Accuracy:
Residual FM:
Signal purity:
*
RBW 300 Hz (Option 27)
Resolution bandwidth (3 dB)
Range:
Accuracy:
6 dB bandwidth:
Video bandwidth:
Amplitude range
Measuring range:
Maximum input level
(Input ATT 10 dB)
Preamplifier OFF:
Preamplifier ON:
Indication range:
Log:
Linear:
Reference level range
Preamplifier OFF:
Log:
Linear:
Preamplifier ON:
Log:
Linear:
Input ATT range:
Dynamic range
Average nose level:
Preamplifier OFF:
Preamplifier ON:
1 dB gain compression:
Preamplifier OFF:
Preamplifier ON:
Spurious response:
2nd-order harmonic
distortion:
2 signal 3rd-order
intermodulation distortion:
Residual response:
Preamplifier OFF:
Preamplifier ON:
9 kHz to 3 GHz
(Reading of frequency x Frequency reference
accuracy + Span x 1% + RBW x 15% + 60 Hz)
1 Hz to 1 kHz
(Marker frequency x Frequency reference accuracy
+ 1LSD)
(S/N 25 dB, span 200 MHz)
2 x 10
-6
/year, 1 x 10-7/year (Option 20)
1 x 10
-5
(0 to 50°C ), 2 x 10-8/day (Option 20)
1 kHz to 3 GHz, 0 Hz (zero span)
1%
60 Hzp-p/0.1s, 20 Hzp-p/0.1s (Option 20)
offset f 2.6 GHz f > 2.6 GHz
20 kHz -105 dBc/Hz -103 dBc/Hz
10 kHz -100 dBc/Hz* -98 dBc/Hz*
1 kHz to 3 MHz, 1-3-10 sequence
30 Hz, 100 Hz, 300 Hz (Option 27)
< 20%, 1 kHz to 1 MHz
< 25%, 3 MHz
< 20% (added with Option 27)
1 MHz, 120 kHz, 9 kHz
200 Hz (Option 27)
10 Hz to 3MHz, 1-3-10 sequence
+134 dB V to average noise level
+134 dB V, 50 VDC max.
+120 dB V, 50 VDC max.
10 x 10 div
10, 5, 2, 1 dB/div
10% of the reference level/div.
(Input ATT: 0 to 50 dB)
+44.8 dB V to +148.8 dB V (0.1 dB step)
172.8 V to 27.39 V
(Input ATT: 0 to 30 dB)
+26.8 dB V to +118.8 dB V (0.1 dB step)
21.75 V to 866 mV
0 to 50 dB (5 dB step)
RBW 1 kHz, VBW 10 Hz, input ATT 0 dB,
f 10 MHz
-6 dB V + 2f (GHz) dB
-21 dB V + 3f (GHz) dB
f 200 MHz
> +107 dB V (mixer input level)
> +82 dB V (RF input level)
Preamplifier OFF, Mixer input +77 dB V
-70 dBc (100 MHz f <800MHz)
-80 dBc (f 800MHz)
-80 dBc (f 200 MHz, Offset >50 kHz)
When input ATT 0 dB, 75 terminated,
and 1 MHz to 3 GHz
+7 dB V
+2 dB V
After auto calibration at ATT = 10 dB
0.5 dB (100 kHz to 2.2 GHz)
2 dB (9 kHz to 2.2 GHz)
1 dB (100 kHz to 2.2 GHz)
2 dB (9 kHz to 2.2 GHz)
-20 dBm 0.3 dB
After auto calibration
< 0.5 dB
After auto calibration
1.5 dB/80 dB
1dB/10 dB
0.2 dB/1 dB
5% of reference level
0.3 dB (for 0 to 50 dB, with reference to
30 MHz/10 dB)
After auto calibration
< 0.5 dB
1.5 dB (REF = +57 to +107 dB V, ATT = 10 dB,
2 dB/div, RBW = 300 kHz, 100 kHz < f 2.2GHz
after auto calibration)
20 ms to 1000 s, 50 s to 1s (Option 29, zero span)
< 2%
FREE RUN, LINE, VIDEO, EXT, TV,
REPEAT, SINGLE
N type female
75 (nominal)
<1.5:1 (100 kHz to 2.2 GHz)
Input ATT = 10 to 50 dB
<2:1 (9 kHz to 2.2 GHz)
Input ATT = 5 to 50 dB
<2.5:1 (9 kHz to 2.2 GHz)
12 V, 4-pin connector
BNC female, 75 (nominal)
30 MHz, -20 dBm
BNC female, 500 (nominal)
-10 to +10 dBm
BNC female
Small monophonic jack
IEEE-488 BUS connector
D-sub 9-pin
D-sub 25-pin, ESC/P, ESC/P-R, PCL
VGA (15-pin, female)
3.5-inch, MS-DOS format
0 to +50 °C, Relative humidity 85% or less
(no dew condensation)
-20 to +60°C, relative humidity 85% or less
100/200 VAC auto-switchable
100 VAC: 100 to 120 VAC, 50 to 60 Hz
200 VAC: 200 to 240 VAC, 50 to 60 Hz
200 VA or less
Approx. 424 (W) x 177 (H) x 300 (D) mm
(excluding feet and connectors)
14 kg or less
(excluding options, cover, and accessories)
R3132N Specifications
Amplitude accuracy
Frequency response:
Preamplifier OFF:
Preamplifier ON:
Calibration signal level
accuracy:
IF gain error:
Scale indication accuracy:
Log:
Linear:
Input ATT switching error:
Resolution bandwidth
switching level error:
Total level accuracy:
Sweep
Sweep time:
Accuracy:
Trigger mode:
Sweep mode:
I/O
RF input
Connector:
Impedance:
VSWR
Preamplifier OFF:
Preamplifier ON:
Probe power:
Calibration output signal:
10 MHz reference input:
External trigger input:
Sound output
(demodulated audio):
GPIB interface:
RS232 interface:
Printer interface:
Video output:
Floppy disk:
General specifications
Operating temperature:
Storage temperature:
Power supply:
Power consumption:
Dimensions:
Mass:
R3162 Specifications
Frequency
Frequency range:
Frequency band:
Frequency reading accuracy:
(Start, stop, center frequency,
marker frequency)
Counter
Resolution:
Accuracy:
Frequency reference accuracy
Stability:
Frequency span
Range:
Accuracy:
Residual FM:
Signal purity:
RBW 300 Hz (Option 27)
*
Resolution bandwidth (3 dB)
Range:
Accuracy:
6 dB bandwidth:
Video bandwidth:
Amplitude range
Measuring range:
Maximum input level
(Input ATT 10 dB)
Preamplifier OFF:
Preamplifier ON:
Indication range:
Log:
Linear:
Reference level range
Preamplifier OFF:
Log:
Linear:
Preamplifier ON:
Log:
Linear:
Input ATT range:
Dynamic range
Average nose level:
Preamplifier OFF :
Preamplifier ON:
1 dB gain compression:
Preamplifier OFF:
Preamplifier ON:
Spurious response:
2nd-order harmonic
distortion:
2 signal 3rd-order
intermodulation distortion:
Image/multiple/
outband response: 70 dBC
9 kHz to 8 GHz
Frequency band Band
9 kHz to 3.3 GHz 0
3.2 GHz to 6.6 GHz 1-
6.5 GHz to 8 GHz 1+
( Reading of frequency x Frequency reference
accuracy + Span x 1% + RBW x 15% + 60 Hz)
1 Hz to 1 kHz
(
Marker frequency x Frequency reference accuracy
+ 1LSD)
(S/N 25 dB, span 200 MHz)
2 x 10
1 x 10
1 kHz to 8 GHz, 0 Hz (zero span)
1%
60 Hzp-p/0.1s, 20 Hzp-p/0.1s (Option 20)
offset f 2.6 GHz f >2.6 GHz
20 kHz -105 dBc/Hz -103 dBc/Hz
10 kHz -100 dBc/Hz* -98 dBc/Hz*
1 kHz to 3 MHz, 1-3-10 sequence
30 Hz, 100 Hz, 300 Hz (Option 27)
< 20%, 1 kHz to 1 MHz
< 25%, 3 MHz
< 20% (added with Option 27)
1 MHz, 120 kHz, 9 kHz
200 Hz (Option 27)
10 Hz to 3MHz, 1-3-10 sequence
+30 dBm to average noise level
+30 dBm, 0 VDC max.
+13 dBm, 0 VDC max.
10 x 10 div
10, 5, 2, 1 dB/div
10% of the reference level/div.
(Input ATT: 0 to 75 dB)
-64 to +65 dBm (0.1 dB step)
141.1 V to 397.63 V
(Input ATT: 0 to 30 dB)
-82 to +10 dBm (0.1 dB step)
17.76 V to 707.1 mV
0 to 75 dB (5 dB step)
RBW 1 kHz, VBW 10 Hz, input ATT 0 dB,
f 10 MHz
Band 0: -117 dBm + 2f (GHz) dB
Band 1-: -115 dBm + 0.5f (GHz) dB
Band 1+: -115 dBm + 0.5f (GHz) dB
-132 dBm + 3f (GHz) dBm (at 1 MHz to 3.3 GHz)
f 200 MHz
> 0 dBm (mixer input level)
>-25 dBm (RF input level)
Preamplifier OFF
Frequency range Mixer input Distortion level
100 MHz f <800 MHz -30 dBm -70 dBc
f 800 MHz (Band 0) -30 dBm -80 dBc
f 3.3 GHz -10 dBm -100 dB
-80 dBc (Mixer input -30 dBm, f 200 MHz,
Offset > 50 kHz)
-6
/year, 1 x 10-7/year (Option 20)
-5
(0 to 50°C), 2 x 10-8/day (Option 20)
Residual response:
Preamplifier OFF:
Preamplifier ON:
Amplitude accuracy
Frequency response:
Preamplifier OFF:
Preamplifier ON:
Calibration signal level
accuracy:
IF gain error:
Scale indication accuracy:
Log:
Linear:
Input ATT switching error:
Resolution bandwidth
switching level error:
Total level accuracy:
Sweep
Sweep time:
Accuracy:
Trigger mode:
Sweep mode:
I/O
RF input
Connector:
Impedance:
VSWR
Preamplifier OFF:
Preamplifier ON:
Probe power:
Calibration output signal:
10 MHz reference input:
External trigger input:
Sound output
(demodulated audio):
GPIB interface:
RS232 interface:
Printer interface:
Video output:
Floppy disk:
General specifications
Operating temperature:
Storage temperature:
Power supply:
c
Power consumption:
Dimensions:
Mass:
1
Temperature range at 20 to 30°C 2 dB is added in the range of 0 to 50 °C
*
2
Temperature range at 20 to 30°C 0.5 dB is added in the range of 0 to 50 °C
*
When input ATT 0 dB, 50 terminated
-100 dBm (1 MHz to 3.3 GHz)
-90 dBm (>3.3 GHz)
-105 dBm (1 MHz to 3.3 GHz)
After auto calibration Preselector peak
After adjustment at ATT = 10 dB
0.5 dB (100 kHz to 3 GHz)
2 dB (9 kHz to 3.3 GHz)
2 dB (3.2 to 8 GHz)
1 dB (100 kHz to 2.7 GHz)
2 dB (9 kHz to 3.3 GHz)
-20 dBm 0.3 dB
After auto calibration
< 0.5 dB
After auto calibration
1.5 dB/80 dB
1 dB/10 dB
0.2 dB/1 dB
5% of reference level
0.3 dB (for 0 to 50 dB, with reference to
30 MHz/10 dB)
After auto calibration
< 0.5 dB
1.5 dB (REF = -50 to 0 dBm, ATT = 10 dB,
2 dB/div, RBW = 300 kHz, f = 100 kHz to 3 GHz,
after auto calibration)
20 ms to 1000 s, 50 s to 1s (Option 29, zero span)
< 2%
FREE RUN, LINE, VIDEO, EXT, TV,
REPEAT, SINGLE
N type female
50 (nominal)
<2:1 (9 kHz to 3.3 GHz)
<2:1 (3.2 to 8 GHz)
Input ATT = 10 to 75 dB
<2.5:1 (9 kHz to 3.3 GHz)
12 V, 4-pin connector
BNC female, 50 (nominal)
30 MHz, -20 dBm
BNC female, 500 (nominal)
-10 to +10 dBm
BNC female
Small monophonic jack
IEEE-488 BUS connector
D-sub 9-pin
D-sub 25-pin, ESC/P, ESC/P-R, PCL
VGA (15-pin, female)
3.5-inch, MS-DOS format
0 to +50 °C, Relative humidity 85% or less
(no dew condensation)
-20 to +60 °C, relative humidity 85% or less
100/200 VAC auto-switchable
100 VAC: 100 to 120 VAC, 50 to 60 Hz
200 VAC: 200 to 240 VAC, 50 to 60 H
200 VA or less
Approx. 424 (W) x 177 (H) x 300 (D) mm
(excluding feet and connectors)
15 kg or less
(excluding options, cover, and accessories)
R3132/3162-9E Jan. '02
Options
OPT.73 Wide-range FM demodulation
Measuring amplitude range: > -50 dBm + input attenuation value
FM Deviation
Measuring range 2.5 MHz, 1 MHz, 500 kHz, 250 kHz, 100 kHz,
Linearity error*: (2 % of measuring range)
Offset error*: (4 % of measuring range + K + Readout of
Demodulation frequency
bandwidth (3 dB): 300 kHz (nominal)
These errors are values obtained by executing “FM Demod ALL CAL” software,
*
after warming up the R3132/3132N/3162 for 30 minutes or more.
OPT.74 Tracking generator
Frequency range: 100 kHz to 3.0 GHz
Output level range: 0 to -59.9 dBm
Output level accuracy: 0.5 dB (30 MHz, -10 dBm, 20 to 30°C)
Output level flatness: 1.0 dB (100 kHz to 1 GHz)
Spurious
Harmonics: -20 dBc (output level = -10 dBm)
Non-harmonics: -30 dBc (output level = -10 dBm)
(at center frequency 1 GHz, RBW Wide,
-20 dB or more than reference level)
50 kHz, 25 kHz, 10 kHz
frequency x Frequency reference accuracy)
K; 8 kHz (measuring range 2.5 MHz to 250 kHz)
2 kHz (measuring range 100 kHz to 10 kHz)
1.5 dB (100 kHz to 3 GHz)
(-10 dBm, 30 MHz reference)
Specifications may change without notification.
R3132/3162-9E Jan. '02
Loading...