Atec PMM-EP600 User Manual
EP-600 series
USB/RS232 Electric Field Probes
EP-600 series features EP-600, EP-601, EP-602, EP-603
The all-in-one that sets the standard for miniature optically
coupled broadband E-field isotropic probes
Exceptionally small-sized spherical symmetrical configuration, lightweight and miniaturized electronics combined with excellent RF characteristics make the PMM EP-600
series RF Electric Field Probes the ideal solution for all EMC/EMI applications (chambers and TEM/GTEM cells), biology and materials research and wherever fast and accurate measurements with negligible or minimum interference of the probe to the field
under measure are essential. Accredited calibration on request.
Main Features
• 5 kHz to 18 GHz frequency range
• 60 dB dynamic, single range
• Symmetrical dipole configuration
• Excellent isotropy (0,3 dB typical)
• Up to 40 meters communication by Fiber Optic Cable
• Up to 80 hours of operation before recharging
• High performance, high reliability Li-Mn battery
• PC direct connection via Optical to RS232/USB adapters
• Extremely lightweight: 25 g only!
EP-600, EP-601, EP-602, EP-603
USB/RS232 Electric Field Probes
COMMON SPECIFICATIONS
Resolution
Sensors
Measurement mode
Sampling rate
Digital filtering
Internal battery
Operation time
Recharging time
Internal data memory
Communication
Fiber optic connector
Fiber optic length
Fiber optic to PC
PC software
Operating temperature
Temperature reading resolution
Battery voltage reading resolution
Dimensions
Weight
Probe holder tip
0,01 V/m
Six monopoles
X-Y-Z axis simultaneous sampling
22 to 0,03 Samples/s depending on
filter settings
Low-pass 2,3 to 28 Hz; 80 dB notch 50/60 Hz
3V - 5 mA/h, Li-Mn rechargeable
80 hours @ 0,4 S/s, 28 Hz filter
60 hours @ 5 S/s, 28Hz filter
48 hours for full operation time
Partial charging allowed, e.g.:
8 hrs rech. = 12 hrs operation @ 5 S/s
1 hr rech. = 5 hrs operation @ 0,4 S/s
Serial nr. - Calibration factors & date
Firmware version
Bidirectional fiber optic link
HFBR-0500
10 m, standard
20/40 m options
Fiber optic to RS232 converter
RS232 to USB converter
Displays field, temperature, battery
Sampling, filters, averaging, frequency setting
Manual data logging as text file
-10 °C + 50 °C
0,1 °C
10 mV
53 mm overall
(body: 17 mm dia.; sensor, 17 mm each)
25 g, incl. 1 m fiber optic pigtail
1/4 20 UNC female
Ordering Information:
EP-600 Field probe 100 kHz - 9,25 GHz 0,14 - 140 V/m
EP-601 Field probe 10 kHz - 9,25 GHz 0,5 - 500 V/m
EP-602 Field probe 5 kHz - 9,25 GHz 1,5 - 1500 V/m
EP-603 Field probe 300 kHz - 18 GHz 0,17 - 170 V/m
Supplied with:
• 10 m fiber optic cable
• Optical/RS232 adapter + RS232/USB adapter
• PC Utility WIN-EP600
• Charging fixture, A/C charger, tripod mounting tip
• Standard calibration certificate
Options:
• FO-EP600/20 Fiber optic cable, 20 m
• FO-EP600/40 Fiber optic cable, 40 m
• Accreditated Certificate
Main specifications (for full information please refer to the User Manual)
EP-600 EP-601 EP-602 EP-603
Frequency Range
Flatness
Dynamic Range
Overload
100 kHz - 9,25 GHz 10 kHz - 9,25 GHz 5 kHz - 9,25 GHz 300 kHz - 18 GHz
Frequency correction OFF
1 - 150 MHz: 0,8 dB
0,5 - 6000 MHz: 1,6 dB
0,3 - 7500 MHz: 3,2 dB
Frequency correction ON, typical
0,3 - 7500 MHz: 0,4 dB
0,14 - 140 V/m
60 dB single range
300 V/m 1000 V/m 3000 V/m 350 V/m
Frequency correction OFF
0,1 - 150 MHz: 0,4 dB
0,05 - 6000 MHz: 1,6 dB
0,03 - 7500 MHz: 3,2 dB
Frequency correction ON, typical
0,05 - 7500 MHz: 0,4 dB
0,5 - 500 V/m
60 dB single range
Frequency correction OFF
0,1 - 150 MHz: 0,4 dB
0,05 - 6000 MHz: 1,6 dB
0,03 - 7500 MHz: 3,2 dB
Frequency correction ON, typical
0,05 - 7500 MHz: 0,4 dB
1,5 - 1500 V/m
60 dB single range
Frequency correction OFF
3 - 8200 MHz: 1,4 dB
1 - 12000 MHz: 2,4 dB
0,6 - 1800 MHz: 3,8 dB
Frequency correction ON, typical
0,3 - 18000 MHz: 0,4 dB
0,17 - 170 V/m
60 dB single range
Narda Safety Test Solutions Srl
Via Leonardo da Vinci, 21/23
20090 Segrate (Milano) - ITALY
Phone: +39 02 2699871
Fax: +39 02 26998700
E-Mail: support@narda-sts.it
Internet: www.narda-sts.it
EP600-FEN-30200 - Specifications subject to changes without prior notice
Loading...