Atec PM5A User Manual
INSULATION ANALYZER
MODEL PM5A
APPLICATION
Periodic resistance testing of electrical windings can
detect deterioration or contamination in the insulation which
will shorten winding life. This testing is recommended to
prevent major failures and to determine when corrective
action should be taken.
PHENIX Technologies offers the PM5A as a multifunction insulation analyzer. This unit can be operated as a
conventional Megohmmeter/Hipot or in automatic modes
to perform a Dielectric Absorption Ratio Test,
Polarization Index (PI) T est or Step Voltage T est. The test
set provides up to 5kVDC and performs all necessary
calculations to accurately determine the results. T est results
can be viewed on the LCD Display or printed out via the
built in printer.
®
TECHNICAL SPECIFICATIONS
DESIGN & SAFETY FEATURES
Battery Powered Operation
•
Automatic operation with microprocessor control
•
Guard circuit for stray leakage current bypass
•
User selectable output voltage in 1 V steps
•
(50-5000 V)
Large easy to read LCD Screen Display
•
10 ft. (3 meter) output leads
•
Audible Safety Warning
•
Built-in Printer
•
Integrated cable storage in lid
•
Light weight, portable and enclosed in rugged, high
•
density polyethylene carrying case
OPTIONS
Ground Stick
•
Discharge Stick
•
Infrared Remote Temperature Sensor (Handheld)
•
INPUT: 100 VAC, 1.0 A to 240 VAC, 0.5A, 50/60 Hz
or Internal Battery Power
Resistance Range
OUTPUT: 500 VDC @ 2.0 mA 250kΩ-250GΩ
1000 VDC @ 2.0 mA 500kΩ-500GΩ
2500 VDC @ 2.0 mA 1.25MΩ-2.5TΩ
5000 VDC @ 2.0 mA 2.5MΩ-5TΩ
or User Selectable in 1V steps between 50V-5000 V.
Negative Polarity, Positive ground
METERING: LCD Screen
Voltage: 4 ranges, 500/1000/2500/5000 VDC
Current: 5 ranges, 2000/200/20/2/0.2 µA (auto ranging)
ACCURACY: Voltage: ±1% of Reading, >5% of Range
Current: ±1% of Reading, >5% of Range
INPUT CABLE: 7’ (2m), 3 wire, removable
OUTPUT CABLES: 3 cables, each 10’ (3m) long for
voltage, return and ground.
DIMENSIONS: 16.5” (419mm) W x 15.25” (388mm) D x
11.25” (286mm) H
WEIGHT: 27 lbs.(12 kgs)
EXPERIENCE . . . QUALITY . . . RELIABILTY
10304
CONTROL PANEL LAYOUT
Note: Due to continual development, specifications are
subject to change without notice.
COMPANY PROFILE
PHENIX TECHNOLOGIES is a leading manufacturer of high voltage, high current, and high
power test systems and components. Our test systems are in operation around the world satisfying the
testing requirements of our customers.
Our 65,000 square foot headquarters is a modern manufacturing facility where all the major
components of our systems are produced. All aspects of electrical and mechanical design, software
design and actual production are performed in this facility and controlled by an ISO9001 quality program.
Our engineers offer a unique blend of theoretical knowledge and practical experience. Our ever-expanding
Service & Calibration Department stands ready to assist you during and after installation to insure
years of trouble free service.
Our engineering resources, manufacturing capability and commitment to flexibility have earned
us the reputation as the supplier of choice. From portable test equipment to large, cutting edge automated
test systems, PHENIX T echnologies provides solutions for your testing needs. You owe it to yourself to
discuss your testing requirements with PHENIX Technologies today.
®
Your Local Representative is:
7/04 © Copyright—Phenix Technologies, Inc., 2004. All rights reserved
75 Speicher Drive
Accident, MD 21520 USA
Tel: 301-746-8118 • Fax: 301-895-5570
e-mail: info@phenixtech.com
http://www.phenixtech.com
Loading...