Atec PIM155 User Manual

PIM 155

100kHz & 1MHz Oscillating Magnetic Field Module

 IEC 61000-4-10 describe an oscillating magnetic

field generator. The oscillating magnetic field is used
to test the immunity of electronic equipment to be
installed in high voltage sub-stations.

Safety is paramount when AC and impulse
voltages are being used. The PIM 155 High Voltage
connections are all designed so no accidental contact
can occur.

PIM 155 with the PSURGE 8000 Surge
Platform can perform all the
programming functions required to
perform IEC and ANSI testing without
the need of a control computer.
A high accuracy current probe is
delivered with the PIM155 to verify the
induction coil currents.

The integration in the WinFEAT&R control and
reporting software package enhances an efficient
set-up and operation of this test system. Most
importantly, the test load can be transferred to a
computer freeing valuable resources.



Features



100kHz & 1MHz frequencies



Magnetic field strength up to 100A/m



Repetition rate of 400Hz @ 1MHz



Variable burst duration



Benefits

International application – Specifically designed

to meet and exceed the requirements of IEC, EN,
and ANSI tests for power line applications.

Safe and Easy - The interlocked HV section and the
specially designed output sockets, allow your
operators to test safely and easily.

Sturdy and Reliable - Careful component selection
ensures that the PIM 155 will continue to operate
under the most strenuous testing conditions.

Report Generation - The unit can automatically
generate test reports without a computer. Add
WinFEAT&R control and reporting software to collect
and collate data in any format you like.



Applications

 IEC 61000-4-10

 EN 61000-4-10



Technical Specifications

Burst Frequency 100kHz & 1MHz Impulse Polarity Positive, Negative &

Alternating

Impulse Repetition 40 Hz & 400Hz

Damping Rate 50% Vpk between 5th and

10th peak

Current Range 6.5 – 120A

Magnetic Field

5.4A/m….100A/m

Coil Factor 0.83

Strength

Weights and Dimensions (W x H x D, net weight)

PIM 155 45 x 20 x 57 cm 44 lbs (29 kg)



PIM 155 Art. No. 249194 Scope of supply

WinFEAT&R Control Window

Qty. 1 PIM 155 Impulse Module
Qty. 1 HV DC Bus cable 1m
Qty. 1 Haefely Bus cable 0.5m
Qty. 1 Earth bonding cable 1m
Qty. 1 Earth bonding cable 0.25m
Qty. 1 MSURGE Coil 1m x 1m
Qty. 1 Users Manual



Options and Accessories

WinFEAT&R Control and reporting software.

Runs under windows 98, NT, ME,
2000, XP

Rack Mounting Modules can be rack mounted for

greater mechanical stability and
mobility.

Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland

 + 41 61 373 41 11
 + 41 61 373 45 99



[e-mail]

Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. PIM155_2008-04-14

Locate your local
sales representative at

www.haefelyEMC.com

North American Office

Hipotronics Inc.

Haefely EMC Division

1650 Route 22

Brewster, NY 10509

 ++1 845 279 3644 x262

 ++1 845 279 2467

 [e-mail]