Atec PGCS115 User Manual
CS115 Pulse Generator
This test generator is designed to comply with the requirements of the MIL-STD-461 CS115.
The test method CS115 is used to verify the ability of the EUT to withstand pulse excitation on
interconnecting cables. The pulse generator can be ordered with all the accessories in order to
build the full test set-up basically consisting of an injection probe, an attenuator and an
oscilloscope. The generator can be fully controlled by a computer through a RS232 and USB
interface.
SPECIFICATIONS
Type PG-CS115
Standard
Charging voltage
Repetition rate
Rise time (10 - 90 %)
Fall time (90 - 10 %)
Pulse duration (50 - 50 %)
Output impedance
Output connector
Remote control
Power supply
Dimensions
Weight
MIL-STD-461 D / E / F CS115
0 - 5 kV
1 - 60 Hz
≤ 700 ps
≤ 1.5 ns
> 30 ns
50 Ω
N
RS232 and USB
85 - 264 Vac / 50 - 60 Hz / 150 VA
45 x 19 x 56 cm (W x H x L)
13 kg
montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: products@montena.com
Loading...