Atec PGCS106 User Manual
CS106 Pulse Generator
This generator is designed for the test of the transients conducted susceptibility of power leads
according to MIL-STD-461F / CS106. These requirements are applicable to submarine and
surface ship equipment and subsystem AC and DC input power leads. The pulse generator
must be ordered with the active inductive coupler IC10M. Other accessories are available as an
option in order to build the full test set-up, basically consisting of a calibration load, an
oscilloscope, etc. The generator can be fully controlled by a computer through a RS232 or an
USB interface.
This generator is also available as a module which has to be installed inside the POG-CS116
modular generator.
SPECIFICATIONS
Reference PG-CS106 M-CS106
Type
Standard
Internal peak voltage
Peak current
Repetition rate
Rise time (0 – 100 %)
Fall time (100 – 0 %)
Pulse duration (0 – 0 %)
Output impedance
Output connector
Remote control
Power supply
standalone generator module
MIL-STD-461F CS106
up to 500 V
8 – 100 A
1 – 15 pulses per second
1.5 µs ± 0.5 µs (on 5 Ω)
3.5 µs ± 0.5 µs (on 5 Ω)
5 µs ± 22 % (on 5 Ω)
≤ 2 Ω
Hummel M23
RS232 and USB
90 – 132 Vacor 170 - 264 V
50 - 60 Hz / 150 VA
ac
internal
Dimensions (W x H x L)
Weight
montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79
www.montena.com e-mail: products@montena.com
45 x 19 x 56 cm 23.5 x 6.5 x 24 cm
13 kg 1.2 kg
Loading...