Atec PG1275 User Manual

Surge Generator for MIL-STD 1275

This generator PG1275 is specially designed for the test of the susceptibility to surges and
spikes of military 28 Vdc electric circuits. The equipment allows performing the following tests
according to MIL-STD 1275D of: imported and exported spikes, imported and exported surges.
The surge voltages are supported up to 125 V and the spike charging voltage up to +/-500 V.
The maximum permanent current of the 5 µH internal coil is 400 A dc. The pulse generator can
be ordered with all the accessories in order to build the full test set-up basically consisting of
batteries and an oscilloscope. The generator can be fully controlled by a computer through a
RS232 or an USB interface.

SPECIFICATIONS

Type PG1275
Standard

Transients supported

Test equipment operating voltage
Test equipment operating current
Inductor
Output connectors
Remote control
Operating temperature
Power supply
Dimensions
Weight

MIL-STD-1275D
imported and exported spikes

imported and exported surges
28 Vdc
400 A
5 µH 400 A
ITT IP67 400 A
RS232 and USB
0 – 40oC
90 - 264 Vac/ 50 - 60 Hz / 100 VA
53 x 53 x 53 cm (W x H x L)
50 kg

montena technology - 1728 Rossens - Switzerland - phone + 41 26 411 84 84 - fax + 41 26 411 17 79

www.montena.com e-mail: [e-mail]