Atec PFS200N User Manual

DATA SHEET > PFS 200N-series > 20100408

PFS 200N SERIES

AUTOMOTIVE POWER FAIL SIMULATOR

FOR TESTS ACCORDING TO ...

> BMW GS 95003-2
> BMW GS 95024-2-1 (2010-01)
> Chrysler CS-11809 (2009)
> Chrylser CS-11979
> Chrysler PF-9326
> Cummins 14269 (982022-026)
> DaimlerChrysler DC-10615
> DaimlerChrysler DC-10842
> DaimlerChrysler PF-10541
> Fiat 9.90110
> Ford EMC-CS-2009.1
> Ford ES-XW7T-1A278-AB
> Ford ES-XW7T-1A278-AC
> Ford WDR 00.00EA
> Freightliner 49-00085
> GMW 3172
> Hyundai/Kia ES 95400-10, Rev. D
> Hyundai/Kia ES 96100-02 (2006)
> Hyundai ES 39110-00
> Iveco 16-2103 Rev.15 (2010)
> EMC-CS-2010JLR V1.1 (2011-01)
> ...

PFS 200N - AUTOMOTIVE POWER FAIL SIMULATOR FOR VOLTAGE DIPS AND INTERRUPTIONS

The PFS 200N Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle
manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall
times below 1 microsecond an electronic switch.

HIGHLIGHTS

> Standalone test generator for voltage dips and

APPLICATION AREAS

AUTOMOTIVE

interruptions
> Rise/fall time <1us
> Electronic short-circuit protection
> Rated voltage 60V DC
> Front panel operation
> Standard Test routines
> USB and GPIB interfaces

www.emtest.com © EM TEST > PAGE 1/4

DATA SHEET > PFS 200N-series > 20100408

TECHNICAL DETAILS

BENEFITS

The PFS 200N is a standalone tester providing an
electronic switch to perform voltage dips and drops
(micro-interruptions) with fast rise and fall times of 1
microsecond. For voltage dips two DC voltage supplies are
required while for for voltage drops (micro-interruptions)
only one DC voltage supply is needed. The PFS 200N has
the ability to control one external DC voltage source by
means of an analog DC signal. The PFS 200N can also be
easily integrated into a complete test set-up.
Operation is possible both manually and by software via
USB or GPIB. Fail inputs allow to control an ongoing test
sequence based on the status of the DUT.
Pre-programmed Standard Test routines allow highest
user convenience. Still the PFS 200N offers the Quick
Start test routine where parameters can be changed
on-line during a test to evaluate the susceptibility level of
an individual DUT.

OPERATION

EASY TO OPERATE

Front panel menu and function keys enable the user to
program his test routines quickly and accurately. The
cursor allows fast control of all test parameters of the
programmed routine, thus test procedures are simplified
and confidence is generated that every step is carried out
correctly.

SOFTWARE

ISO.CONTROL - SOFTWARE FOR CONTROL AND
DOCUMENTATION

Outstanding user convenience, clearly structured
windows and operation features and the EM TEST
standards library along with the flexibility to generate
user specific test sequences very easily are the main
features of iso.control software. The software is
automatically configured according to the connected EM
TEST generators. iso.control software covers
international/national standards and most of the
manufacturer standards and is continuously updated.
Extensive reporting capabilities help the user to create
test reports that meet international requirements.
ISMISO is supported by Windows 98, Windows 2000,
Windows XP, Windows Vista and Windows 7. Remote
control is achieved either via USB or GPIB. iso.control
supports a wide range of GPIB cards of National
Instruments.

AUXILIARY DEVICES

RDS 200N - EXTERNAL CONTROLLED DC POWER SUPPLY

In order to generate any voltages between the level of the
battery supply and zero for voltage drops
(micro-interruption) tests a controlled DC supply is
needed. The RDS 200N perfectly fits these requirements
and is controlled by the analog DC output signal of the
PFS 200N.
The RDS 200N is usually connected to the PF2 input of the
PFS 200N.

www.emtest.com © EM TEST > PAGE 2/4

DATA SHEET > PFS 200N-series > 20100408

TECHNICAL DETAILS

PFS 200N MODELS

PFS 200N30 Power Fail Simulator 60V/30A
PFS 200N50 Power Fail Simulator 60V/50A
PFS 200N100 Power Fail Simulator 60V/100A
PFS 200N150 Power Fail Simulator 60V/150A
PFS 200N200 Power Fail Simulator 60V/200A

TECNICAL DATA PFS 200N30

DUT voltage Max. 60V for channels PF1/PF2
DUT current Max. 30A for channels PF1/PF2
Switching time 1us (rise/fall time)
Peak current 70A for 500ms
Safety Short circuit protection

TECNICAL DATA PFS 200N50

DUT voltage Max. 60V for channels PF1/PF2
DUT current Max. 50A for channels PF1/PF2
Switching time 1us (rise/fall time)
Peak current 100A for 500ms
Safety Short circuit protection

TRIGGER

Automatic Automatic release of the events
Repetition rate 100ms to 999s
Dip/drop durationtd1us to 10s

Manual Manual release of a single event
CRO Trigger Trigger for oscilloscope, +15V edge
External External release of a single event

TEST ROUTINES

Quick Start Immediate start; easy-to-use and

fast

Chrysler Voltage Drop Out

Voltage Dig
Mechanical Switching

Ford Drop Out High

Drop Out Low
Drop Out Single

Power Dip
RSA/Renault Micro interruptions
Service Service, setup, self test

GENERAL DATA

TECNICAL DATA PFS 200N100

DUT voltage Max. 60V for channels PF1/PF2
DUT current Max. 100A for channels PF1/PF2
Switching time 1us (rise/fall time)
Peak current 150A for 500ms
Safety Short circuit protection

TECNICAL DATA PFS 200N150

DUT voltage Max. 60V for channels PF1/PF2
DUT current Max. 150A for channels PF1/PF2
Switching time 1us (rise/fall time)
Peak current 200A for 500ms
Safety Short circuit protection

TECNICAL DATA PFS 200N200

DUT voltage Max. 60V for channels PF1/PF2
DUT current Max. 200A for channels PF1/PF2
Switching time 1us (rise/fall time)

Dimensions,
weight

19"/3HU, approx. 15kg;

19"/6HU, approx. 18kg for

PFS 200N150 and PFS200N200
Supply voltage 115V/230V +10/-15%
Fuses 2 x T 1AT

INTERFACE

Interface USB
Parallel interface IEEE 488, adresses 1 to 30
Analog interface OVdc to 10Vdc to control an

external dc source (e.g. RDS 200N)

OPTIONS

iso.control Software to control the test,

including standard library, test

report facility and data conservation

generator

Peak current Greater than 200A
Safety Short circuit protection

www.emtest.com © EM TEST > PAGE 3/4

DATA SHEET > PFS 200N-series > 20100408

COMPETENCE WHEREVER
YOU ARE

CONTACT EM TEST DIRECTLY

Switzerland

EM TEST (Switzerland) GmbH > Sternenhofstraße 15 > 4153 Reinach >
Switzerland
Phone [phone] > Fax [phone]
Internet: www.emtest.ch > E-mail: [e-mail]

Germany

EM TEST GmbH > Lünener Straße 211 > 59174 Kamen > Deutschland
Phone [phone] > Fax [phone]
Internet: www.emtest.com > E-mail: [e-mail]

France

EM TEST FRANCE > Le Trident - Parc des Collines > Immeuble B1 - Etage 3 >
36, rue Paul Cézanne > 68200 Mulhouse > France
Phone [phone] > Fax [phone]
Internet: www.emtest.fr > E-mail: [e-mail]

Poland

EM TEST Polska > ul. Ogrodowa 31/35, 00-893 Warszawa > Polska
Phone [phone]
Internet: www.emtest.com/pl > E-mail: [e-mail]

Information about scope of delivery, visual design and technical data correspond with the state of development at time of release.\nTechnical
data subject to change without further notice.

USA / Canada

EM TEST USA Inc. > 9250 Brown Deer Road > San Diego > CA 92121
Phone [phone] > Fax [phone]
Internet: www.emtest.com > E-mail: [e-mail]

P.R. China

EM TEST Representative Office Beijing > Rm 913, Leftbank >
No. 68 Bei Si Huan Xi Lu > Haidian District > Beijing 100080 > P.R. China
Phone [phone] > Fax [phone]
Internet: www.emtest.com > E-mail: [e-mail]

Malaysia

EM TEST (M) SDN BHD > Unit B2-6, Jalan Dataran SD2 > Dataran SD2, PJU9 >
Bandar Sri Damansara > 52200 Kuala Lumpur > Malaysia
Phone [phone] > Fax [phone]
Internet: www.emtest.com > E-mail: [e-mail]

www.emtest.com © EM TEST > PAGE 4/4