Page 1
Post Design Diagnostics
PEFT 8010
Burst Test System according to IEC/EN 61000-4-4 Edition 1 & 2 up to 7.3kV
Electrical fast transients (EFT) are the most
popular sources of disturbances in modern
electronic circuits. EFT/bursts are caused by the
operation of electro-mechanical switches, motors
or power distribution switchgears.
The PEFT 8010 instrument contains all the
features expected from a top quality EFT
generator. Unbeaten performance paired with a
high end assembly guarantee a cost effective,
long-lasting investment and valuable test results.
PEFT 8010 can either be operated by the front
panel keys in a stand alone manner or be
controlled by PC via RS232 or IEEE 488 as part of
a complete EMC test system.
Tests can be performed manually or
automatically with predefined test programs. The
front panel layout with its large LCD display and
the intuitive software are especially designed for
self explanatory and safe operation of the
instrument. Up to 36 test setups can be
programmed and saved on the internal nonvolatile memory.
Bursts are generated according to the related
standards IEC 61000-4-4 and EN 61000-4-4. The
PEFT 8010 can deliver EFT impulses in different
formats including normal, continuous, random
and real pulse distribution.
For better handling, the PEFT 8010 is equipped
with two grounding connections, one at the front
panel and one at the rear panel. This is very
helpful in making connections to the ground
plane if the PEFT 8010 is used either horizontally
or vertically.
With the integrated “Transition Function” U
the spike frequency, the burst duration and the
burst period can be varied automatically during a
test. Besides this, it is also possible to edit the
parameters manually during a test.
Besides conventional safety features, the
PEFT 8010 contains a separate “Line ON/OFF”
switch with which the main supply can be
disconnected from the equipment under test.
nominal
,
Features
EFT impulse generation according to newest
standards and latest technology.
ESD control and report functions for attaching an
Electrostatic Discharge gun.
Automatic test operation for shortest measuring
time and minimal setup effort.
Data exchange to printer or computer is possible
without any additional hardware/software.
Compact and reliable construction for factory,
laboratory or field use.
Remote control is provided by optional software
(
WinFEAT&R
ISO 9001 : 2000 certified manufactured
Benefits
Unmatched Performance
Accurate and fast measurements make this instrument a
unique tool for cost-effective and reliable testing practices.
Wide Range of Extension Options
A wide range of options ensures a customized EMC test
solution. Compatibility to other generators or detectors
increases the functionality of the instrument up to an overall
EMC test system.
Simple and Safe Operation
Intuitive and clear graphical presentation of the results helps
finding exact failure levels. Software menus are simple to
follow and do not have too many layers in the structure.
A help function has been built into the software, so that
pressing the softkey “HELP” will give you more information
about the operation you are attempting.
Safety features like external emergency stop or warning
lamp protect the user from hazardous and dangerous
situations.
Applications
Approval Testing
Product Development
) designed specially for EMC testing.
Industrial
Medical
Telecommunication
Household
many more
Page 2
Rear p
anel view of the PEFT 8010
Burst Modes
On the PEFT 8010 instrument five different burst
modes can be selected.
1. Normal: Bursts are generated as defined
in IEC 61000-4-4.
U
2. Continuous: The spikes are generated
continuously with the selected frequency.
U
Coupling/Decou p l i n g N e t w o r k
(CDN)
A single phase Coupling/Decoupling Network (CDN)
is built into the PEFT 8010 which enables coupling
of the EFT impulses into a single phase mains
network.
If it is necessary to inject EFT Impulse into a three
phase mains system, the PEFT 8010 can be used
together with an external three phase CDN (up to
100A per phase) with coupling path selection either
t
controlled directly from the PEFT 8010 or manually.
Injection of EFT impulses into signal and control
cables is required by IEC 61000-4-4. The PEFT 8010
has a direct high voltage output connector for use
with the coupling clamp IP4A. The IP4A fulfils all the
requirements of IEC 61000-4-4.
Bursts can also be coupled directly into electronic
t
circuits using the optional electric and magnetic field
generation probes, mainly used for failure detection.
3. Random: The spike frequency changes
within a burst between 16% and 100% of
the entered value.
U
4. Real: The spike frequency is changed
from the entered value to 16% within a
burst. Burst amplitude remains constant.
U
Remote Control S o f t w a r e
(WinFEAT&R)
The control software (WinFEAT&R©) can be installed in
the Microsoft® Windows 95 or higher environments and
can be used to control equipment for EFT
(IEC 61000-4-4), SURGE (IEC 61000-4-5), AC Magnetic
fields (IEC 61000-4-8) and Dips or Interrupts
(IEC 61000-4-11) etc.
Interfacing
EUT Failed
Connect pass/fail detection hardware to this BNC
input and the EUT (Equipment Under Test)
condition, as determined by specific EUT supervision
hardware, is added to the database of test
t
information and finally the log file. EUT condition
can also be used to determine the test course.
Trigger In
External signals can be used to trigger impulse
generation to a particular event.
Sync In
Impulses can be synchronised to any external cyclic
signal with a high degree of accuracy.
t
PESD Control
This interface can be used to attach the PESD 1610
generator to the PEFT 8010. The PEFT 8010 is able
to control and document the ESD pistol operation.
P90 Extension
The P90 interface is a self developed standard used
for communication between test instruments. The
primary function of this interface is to control the
automatic three phase CDN which is available as an
option.
Page 3
Technical S pecifications
90%
50%
10%
VV
spike frequency
rise time
Impulse duration
Wave Shape into 50Ω load
Rise time 5 ns ± 30 %
Impulse duration 50 ns ± 30 %
Wave Shape into 1000Ω load
Rise time 5 ns ± 30 %
Impulse duration 50 ns – 15 / + 100 ns
Burst Characteristic
Voltage at HV-output:
Voltage at CDN output:
Spike frequency 1 Hz … 110 kHz
Burst duration 0.01 … 999 ms
Burst period 0.1 Hz … 400 Hz
Impulses per second max. 250 for Unom > 4 kV
Impulses per burst max. 75 for Unom > 4 kV
Spike distribution normal, continuous,
Polarity positive, negative
Test time 10 s … 8 h per path
1.0 … 7.3 kV
1.0 … 6.6 kV
2.5 ms … 10 s
1 period … 500 periods
max. 500 for Unom ≤ 4 kV
max. 150 for Unom ≤ 4 kV
random, real
Weight and Dimension
Weight 14 kg
W x H x D 450mm x 130mm x 570mm
t t
burst duration
burst period
Single Phase Coupling/Decoupling Network
Maximum AC voltage 264 V @ 16 … 440 Hz
Maximum AC current 16 A @ 50 … 60 Hz, 10 A @
Maximum DC voltage 125 V
Maximum DC current 16 A (dependant on DC
Coupling Modes L-GND, N-GND, PE-GND,
Residual voltage at
Test Supply Input
400 Hz
voltage)
LN-GND, LPE-GND, NPEGND, LNPE-GND
≤ 10% of applied
test voltage
Synchronisation
Frequency 16 2/3 Hz, 40 Hz, 50 Hz,
Impulse trigger automatic, manual, external
60 Hz, 400 Hz, auto
System Configuration
EUT fail input BNC, logic low to trigger
P90 interface for a 3-phase CDN
PESD interface for connecting an ESD
Printer interface Centronix
Computer interface RS-232, IEEE-488 (optional)
Power Supply
Voltage 85 … 264 VAC, 150 VA
Frequency 50 / 60 Hz
extension
generator
Page 4
Scope of Suppl y
PEFT 8010 instrument including
all cables, user manual and
calibration certificate
Art. No. 249180
Accessories and Options
Ordering Information Ordering Number
FP-EFT 32.1 is a fully automatic three phase 32A, 690V/400V CDN. Coupling path selection
is controlled from the PEFT 8010.
FP-EFT 32M is manual three phase 32A, 690V/400V CDN. Coupling path selection is manual.
FP-EFT 100M is a manual three phase CDN for operation up to 100A, 690V/400V. 249586
IP4A is a capacitive coupling clamp for superposition of burst on data lines in accordance
with IEC 61000-4-4, edition 1 and 2.
PAT 14 is an attenuator with division factor 5 (14dB). Allows to reach the lower levels
required in IEC 61000-4-4 with external CDNs.
Easy Control hand held remote control unit used to start, stop or load tests and programs
from the PEFT 8010 memory.
Vertical Operation Stand mounts the PEFT 8010 vertically for easy access while the
instrument stands on a floor level ground plane.
E and H Field Generation Probes set can be used to inject near fields and to find
electromagnetic sensitive areas in a test object.
WinFEAT&R control software for remote operation, data logging and analysis
(FEAT&R = Fast, Easy, Accurate Testing & Reporting).
IEEE-488 Interface P95 IEEE card 249556
OPTICAL DEC95 RS-232 optical link for a galvanic isolation between PEFT 8010 and PC. 249689
EUT-OPT.1 optical link for electrical decoupling of the EUT failed input. 249449
AC Adapter Set for country specific power plug (B, CH, US). 249200
AC Adapter Schuko-UK converts Euro to UK plugs (13A, 250V). 249739
DC Adapter Set for DC applications. 249733
EFT Verification Set for verifying the HV output with 50Ω and 1000Ω load (U max. 8kV) 249995
Adapter Verification for wave shape verification at the line output of the PEFT 8010. 249603
Fiber Optic Interface for connecting the PESD 1610 with the PEFT 8010 mainframe. 249667
Warning Lamp 249944
Emergency Stop Switch 249945
Picture shows: vertical mounted
PEFT 8010 with Field Generation
Probes, Coax Cables, PESD 1610,
Easy Control and Verification Kit.
249253
249017
249130
249948
249602
249735
249608
249970
Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
EMC-sales@haefely.com
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. PEFT8010_2006-11-28.doc
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
EMCsales@hubbell-haefely.com
Loading...