Atec LB-100-MV-12-5 User Manual

Eagle Eye LB-100-MV-12.5 Portable Resistive Load Bank Specifications

Nominal Rating: 100 kW at 480 and 240 Volts AC, 3 Phase, 60 Hertz, 120/241 Amps per Phase

Total load de-rates to 75 kW when operated at 208 Volts AC, 3 Phase, 60 Hertz, 208 Amps/ph. Other ratings: 50kW@240-1=208A, 38kW@208-1=181A, & 25kW@120-1 = 208A

Tolerance: +5% (105 kW at 480 & 240 VAC 3 ph. & 79 kW at 208 VAC 3 ph.)

Duty Cycle:

Load Connections: Quick disconnect single pole power connectors.

3 Phase 4 “wye” (A,B,C,N) & 1 Phase 2 Wire for single phase testing.

Nominal Load Step Resolution:

12.5 kW at 480 Volts AC 3 phase r 12.5 kW at 240 Volts AC 3 phase*

6 o 5 or 10 kW at 208 Volts AC 3 phase*

3.3 or 6.5 kW at 240 Volts AC single phase*

1.6 or 3.3 kW at 240 Volts AC single phase*

* User can select: low resolution, low capacity mode; or high capacity, high resolution mode Step switches are labeled for each vo

Easy to use operator control panel with: Latest in digital metering with 3 line LED display Status

Air-flow indicating red and green lights

Over-temperature red light Main Power on/off switch Fan on/off switch Master Load switch Voltage Selection switch Individual load step switches Test jacks for meter probes A, B, C, & N

Rated for continuous generator test operation.

ltage and phase mode

indicating lights:

Safety Features: Branch circuit fuse protection on all 3 phases of all load steps. . Fused 120V control circuit Air pressure switch to prevent load from being applied if loss of cooling air is detected Over-temperature Blower Motor circuit is protected by current overload protection. Operator warning and caution statements are located on appropriate access panels and doors.

Control Power: 110-120 VAC, 1 Phase, 50/60 Hertz, required for control circuit operation. Line cord provided.

Cooling System:

Integrally mounted, high velocity, low noise, necessary cooling air for the resistor load elements.

sensor automatically removes load if an over-temperature condition is detected

110-120V AC 1 phase 50/60 Hz. fans provide the

Construction / features: Rugged construction all metal frame Durable powder coat finish Lifting handles Stainless steel exterior fasteners Front control guards / handles

it Dimensions: 14" wide x 28" long x 22" tall

ht: 75 lbs.

Weig

Optional features available:

Wheel kit Custom vinyl storage cover Military style, indestructible padded hard case with wheels and telescoping handle 10’ cable set with mating quick di Mating power connector set, for customers power cables

Custom cable set lengths available upon request.

sconne

ct power connectors on load bank end