Atec IPA-A User Manual

Manufacturers > Kaelus (Summitek) Categories > Communications Testing > Wireless, Antenna, Base Station Test > PIM Testers

Kaelus IPA-0707A PIM Tester Kaelus IPA-0850A PIM Tester Kaelus IPA-0900A PIM Tester

iPA SERIES

Battery Portable Passive Intermodulation Analyzer

The iPA Series Passive Intermodulation (PIM) analyzer is the rst battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design includes a tablet computer in a ruggedized case for remote control. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources.

Evolved from a design legacy of eld proven analyzers, this PIM Analyzer enables network operators to improve site performance by nding and eliminating sources of passive intermodulation at the cell site. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.

How-To Video

iPA Passive Intermodulation (PIM) Analyzer

PRODUCT FEATURES

- Rugged and reliable; designed with tower climbers in mind - Fully congurable frequencies, powers and IM products

- 7 inch tablet computer included for remote control of device - Simple to operate touch screen interface

- Extensive reporting capabilities - Spectrum monitor, frequency sweep and time trace modes

- RTF compatible - Battery powered

TECHNICAL SPECIFICATIONS |

SYSTEM

Measurement method Reverse (reected) PIM, 3rd and 5th order

Residual PIM < -117dBm/-160dBc max (<-125dBm/-168dBc typ) (x2 @ 43dBm)

Interface ports

User interface

Return loss alarm Automatic detection and shut down when high RL is detected

1x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD,

1x monitor port (SMB female), 1x SMA-RP (Wi-Fi external antenna)

Local - touch screen display 4.3in (109mm)

Remote - tablet computer (included), any Wi-Fi enabled user device with Web

browser

ADVANTAGE

TRANSMITTER

Transmit frequencies See model table

Frequency increment 100kHz

Frequency accuracy ± 5ppm (max), aging ± 1ppm (max) after rst year

Power per tone (adjustable) +0.1 to 20W (+20 to +43dBm in 1dB increments)

Power accuracy (per tone) ± 0.5dB (max)

|1|

www.kaelus.com

TECHNICAL SPECIFICATIONS CONTINUED |

RECEIVER

Receive band (100kHz steps) See model table

Measurement noise oor < -128dBm

Measurement range -50dBm to -128dBm

ELECTRICAL

Battery power 25.9 VDC, 2500 mAH Li-ion battery packs (removable)

Battery operating time Depends on usage, 2 hr min. per battery pack

Battery charger Output: 29.4 VDC, 1.2 Amp

MECHANICAL

Dimensions 14.5 x 9.4 x 6.3in (369 x 240 x 160mm)

Weight < 26lbs (12kg)

ENVIRONMENTAL

Operating temperature range -10°C to +45°C (+14°F to +113°F)

Storage temperature range -10°C to +60°C (+14°F to +140°F)

Ingress protection (IP) IP54. IP67 when enclosed in optional hard case

Relative humidity 5% to 95% RH non-condensing

Mechanical shock 40G shock rating

MODELS |

DESCRIPTION TX1 RANGE TX2 RANGE RX RANGE (PIM) RTF MODULE *

iPA-0707A 700MHz LOW/HIGH 728-731.5MHz 741-764MHz 698-716MHz; 776-802MHz RTF-1000A

iPA-0850A 850MHz 869MHz 879-894MHz 824-849MHz RTF-1000A

iPA-0900A GSM900 932.5-937.5MHz 949-960MHz 903-915MHz RTF-1000A

iPA-0901A EGSM900 925-935MHz 945-960MHz 880-915MHz RTF-1000A

iPA-1800A DCS1800 1805-1817.5MHz 1855-1880MHz 1730-1755MHz RTF-2000A

iPA-1900A PCS1900 1930-1937MHz 1965-1990MHz 1855-1880MHz RTF-2000A

iPA-1921A Dual Band PCS/ 1930-1950MHz 1970-1990MHz 1850-1910MHz RTF-2000A

AWS 1930-1950MHz 2110-2155MHz 1710-1755MHz

*Range to Fault is an optional accessory available for iPA test instruments which enables users to measure distance to return loss faults as well as distance to PIM faults. The RTF module is sold separately.

Dual Battery charger for standalone charging sold separately.

WARNING: Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be a violation of licensing regulations. Users should obtain permission in advance from any licensed operators that might be affected by these tests. Furthermore, radiating high RF power can pose a personnel risk.

iPA rugged hoist position

iPA shown with iAK-0060A ruggedized trans-

port case with full PIM testing accessories.

|2|

Specications subject to change without notice.

www.kaelus.com