impulse voltage up to 4'800V
spike frequency 1Hz to 2MHz
5 burst modes
12'000 impulses per second
integrated 16Aac/10Adc CDN
internal or external burst synchronisation
parameter modification while a test is running
18 program and 18 test memory locations with
battery backup
control of PESD 1610 ESD generator
Centronix printer interface
hand held remote control unit
accessories
IP4A - Capacitive Coupling Clamp
The IP4A is a capacitive coupling clamp for superposition of
bursts on data lines in accordance with IEC/EN 61000-4-4.
maximum cable size 40mm
minimum test cable length 1m
maximum EFT voltage 8kV
coupling plane mounted on 0.1m insulation block
handy carrying handle
concept, which offers such simplicity of use, that even users
with minimum technical experience, will by carrying out tests in
no time.
This unique software allows users to run user specified or predefined tests according to the latest standards, and monitors
and displays real time output current and voltage values. The
software runs under all latest Microsoft Windows versions and is
compatible with all stand alone Haefely EMC test generators.
IEEE 488 interface
GPIB interface board for the PEFT4010 mainframe
External Warning Lamp
Connected to any generator, the additional, stand-alone widely
seen warning lamp indicates clearly the status of the test
equipment by red & green lights.
External Emergency Stop Switch
Connected to any generator, the EMERGENCY STOP SWITCH,
when activated instantly discharges high voltage circuits and
switches off power to the EUT.
Loading...