Atec Fluke-5502A User Manual
5502A Multi-Product
Calibrator
Robust, transportable solution to
match your workload and budget
5502A features at a glance
• Calibrates a wide variety of electrical test
equipment
• Robust protection circuits prevent costly
damage from operator error
• Ergonomically designed carrying handles
make the 5502A easy to transport
• Rugged carrying case with built-in
handles and wheels and removable
front/rear access doors for in-situ
calibration in almost any environment
• Current output that extends to
120 A when paired with the
52120A Transconductance Amplifier
• Remarkably affordable
Practical solutions
for calibrating in
the lab or in the field
A full-functioned calibrator
that covers a wide range of
common workload
The 5502A Multi-Product Calibrator addresses
common workload items like 3.5 and 4.5 digit
digital multimeters and more. It comes with
internal and external protection features that
enable you to transport it easily and perform
on-site or mobile calibration. The 5502A can
also be fully automated with MET/CAL
Calibration Management Software. It is the ideal
calibrator for metrology professionals who need a
solution for calibrating low-to-medium accuracy
electrical instrumentation.
The 5502A sources direct voltage and current;
alternating voltage and current with multiple
waveforms and harmonics; simultaneous voltage and current outputs or dual voltage outputs to
simulate dc and ac power with phase control; as
well as resistance, capacitance, thermocouples and
RTDs. The 5502A can also measure thermocouples
and thermocouple simulators. Two options add
the capability to calibrate oscilloscopes to either
300MHz or 600 MHz.
Using the Fluke Calibration 52120A
Transconductance Amplifier, the 5502A’s output
current can be extended from 20.5 to 120 A;
and with the use of 25 and 50 turn coils, it can
calibrate instruments requiring up to 6000 A.
The 5502A calibrator covers many
of the most common items in your
workload, including:
• Handheld and bench meters
(analog and digital) to 4.5 digits
• Current clamps and clamp meters
• Panel meters
• Electronic thermometers
• Chart recorders
• Oscilloscope recorders
• XY recorders
• Data loggers
®
Plus
Fluke Calibrators
Multi-Product
Calibrators
Workload 5080A 5502A 5522A 5700A 5720A
Analog/Panel meters
High burden meters
Low burden meters
DMMs
Basic dc V accuracy 100 ppm 50 ppm 11 ppm 6.4 ppm 3.25 ppm
3.5 digits
(typ. ± 0.3% dcV)
4.5 digits
(typ. ± 0.025% dcV)
5.5 digits
(typ. ± 0.015% dcV)
6.5 digits
(typ. ± 0.0024% dcV)
7.5 digits
(typ. ± 12 ppm dcV)
8.5 digits
(typ. ± 3.9 ppm dcV)
Temperature/Pressure
RTD simulate
RTD measure
Thermocouple simulate
Thermocouple measure
Pressure modules opt
Oscilloscopes 1 channel
opt
300 MHz or
600 MHz
opt
600 MHz
opt
200 MHz to 600 MHz
1.1 GHz opt
2.1 GHz
3.2 GHz
6 GHz
25 ps fast edge
Safety testers
Hipot
Megohm meters opt
Installation
PATs
Continuity opt
Power/Energy
Wattmeters
Harmonic analyzers
Flicker meters PQ opt
Phase angle meters PQ opt
Power analyzers PQ opt
Power recorders
Other
Clamp meters
LCR meters CR only CR only
Process calibrators
Data acquisition
Non sine waveforms
RF millivolt meters opt opt
# of calibrator functions 8 11 11 5 5
200 MHz
Multifunction
Calibrators
3 5502A Multi-Product Calibrator
Loading...