Harris offers a complete line of handheld solutions for
video, audio, transport streams, RF and optical fiber
test and measurement.
SD-STAR™ — Analog and SD-SDI monitor and generator
and embedded audio; selectable oscilloscope functionality on
analog input
HD-STAR® — HD-SDI and SD-SDI monitor and generator
with embedded audio
GEN-STAR™ — HD-SDI and SD-SDI generator with
embedded audio and genlock capabilities; video-to-audio lip
sync test signal (V2A)
ASI-STAR™ — Transport stream monitoring with PSIP table
information and ETR 290 priority 1 alarms; record and playout
of ASI transport streams
VSB-STAR™ — Measures RF modulated signals for 8VSB, 64
QAM, 256 QAM digital signals and NTSC analog signals
Optical Fiber Testing
Videotek optical fiber test tools provide you with
convenience and affordability. Whether you’re at the
station or covering a big game, these handy units
provide accurate physical layer verification and reliable monitoring of your single- and multi-mode fiber
networks.
OFI-20B — Optical fiber identifier
OPM-15A/B — Optical power meter
SLS-21A-03/SLS-25B-03 — Stabilized laser source
OLT-20A — Optical loss tester
VLS-20A — Visible laser source
OTM-20A/C — Optical test meter
PalmOTDR-20A/C — Optical time domain reflectometer
Monitoring and Analysis of
Multiple Compressed Streams
MSA Series
The new Multi-Source Analyzer (MSA) Series from Harris offers a range of solutions
that couple confidence monitoring with full testing for compressed video conformance, audio level, data services and ETR-290 on any terrestrial broadcast, cable
headend, satellite or telco network. With two base platforms available (MSA-100
and MSA-300), customers can select the I/O configuration, channel capacity and
system redundancy that meet their specific needs. Both solutions are offered in
space-efficient 1RU packages.
The MSA Series delivers awareness of system information and ancillary data, with
the ability to provide the conformance results in an intuitive GUI interface, along
with one or more mosaic displays that provide real-time full-motion video decode
and audio level analysis. A variety of physical input formats are supported, along
with all major compression standards, a wide array of transport and streaming
protocols, and the ability to simultaneously handle a large number of channels in
real time.
MSA-100* — EL platform, standard with one codec and four SD PIPs, providing full
conformance testing and traffic status monitoring
MSA-300* — HE platform, standard with one codec and eight SD PIPs, providing full
conformance testing and traffic status monitoring
* Number of PIPs and/or shadow testing varies depending on codec type, picture resolution and bit rate.
Options
MSA-CODEC-MPEG2 — MPEG-1 (ISO 11172-2) and MPEG-2 (ISO 13818-2)
MSA-CODEC-MPEG4 — MPEG-4, Part 2
MSA-CODEC-H264 — MPEG-4, Part 10
MSA-CODEC-VC1 — SMPTE 412M
MSA-ADD-4PIPs-Plus-Txt — Add block of four SD or two HD PIPs with full testing and text
MSA-ADD-4Shdw-C-Plus-Txt — Add block of four SD or two HD shadow C-testing plus text
Videotek QuiC™ is a fully automated, file-based test and measurement server
platform. The QuiC solution allows you to verify the quality of compressed
digital content five times as fast as real time for SD, and twice as fast as real
time for HD. QuiC supports the quality assurance (QA) workflow by providing
adjustable alarm thresholds for each analysis parameter used. Each parameter in QuiC determines whether ingested or transferred content is acceptable
or unacceptable. QuiC can be operated manually using an intuitive Graphical
User Interface (GUI), automatically using a “drop box” or file folder feature, or
via automation using the QuiC API to place content into the analysis queue.
Through the Remote View Station option, users can operate the GUI from a
networked Windows PC.
MA-1200 — QuiC with LXF, MXF, GXF and QuickTime wrappers; includes an Inbox (watch
folder) and internal storage
MA-1250 — QuiC with file correction and hardware I/O; provides the same features as the
MA-1200, while adding audio/video I/O
Codecs
One codec comes standard, with multiple codecs to choose from:
MA-OPT-FCT — File correction tools software package
MA-REM-VS — Remote View Station Client Software for Windows
MA-OPT-LL — Loudness monitoring, loudness evaluation per ITU BS.1770 standard
MA-SFTW-MAINT — Adds one year to software package, includes software upgrades and
enhancements — 7% of list price
Compact Monitor Series
The Videotek Compact Monitor Series is a family of space-saving, efficient
video and audio signal monitoring solutions that offer optional 3 Gb/s
capability in two SDI inputs. Both the scope and rasterizer packages are
available as portable or rack-mountable units.
CMN-41 — Compact Monitor Series multiformat on-screen monitor, HD/SD-SDI, 1RU, half
rack, upgradable to 3 Gb/s
CMN-41L — Compact Monitor Series with no front panel controls
CMN-MV — Compact Monitor Series multiformat on-screen monitor with 720p 60 Hz HDSDI
CMN-91 — Compact Monitor Series multiformat signal analyzer with integral LCD, HD/SDSDI,
3RU, half rack, upgradable to 3 Gb/s
CMN-LA — Compact Monitor Series loudness analyzer
CVM-306 — Compact Monitor Series multiformat signal analyzer with integral LCD and
speakers, SD & HD-SDI, 3RU, upgradable to 3G-SDI
VMM-4SNY — Integrated video and audio measurement module for Sony® LCD monitors
with HD-SDI or SD-SDI video input, 1 AES input with up to 16 channels embedded and display;
displays include picture, waveform, vector, gamut, audio, timing
RCU-CMS — Remote Control Panel for the VMM-4SNY video and audio measurement module
and the CMN-41, CMN-91, CMN-MV and CVM-306 compact monitors
TVM Multiformat Signal Analyzers
AVM Audio and Video Monitoring System
Videotek TVM test instruments are designed with the operator in mind,
incorporating traditional features and ergonomically designed controls. All
models in the TVM and AVM product line feature multiformat signal analyzers
with an integrated LCD display to cover any need.
TVM9100PKG — Versions available with dual HD/SD, SD only, or composite inputs; SD
only software upgradable to HD/SD; options for additional SDI or ASI inputs, data analyzer, eye
pattern, jitter analysis, and audio
TVM9140PKG — Versions available with dual 3 Gb/s, HD/SD, SD only, or composite inputs;
SD only software upgradable to HD/SD; data analyzer standard; options for additional SDI or
ASI inputs, eye pattern, jitter analysis, dual link, and audio; view up to four inputs at once with
additional input module
TVM-4MA — Metadata analyzer, HD/SD-SDI; discovers, monitors and alarms on ancillary
and SD VBI data; decodes selected data types; half rack, 3RU
AVM-717 — Two HD/SD-SDI video inputs; data analyzer; analog, AES and embedded audio
monitoring with loudness; built-in stereo speakers; options for additional SDI or composite
video or ASI inputs, jitter analysis; view up to four inputs at once with additional input module
TVM, AVM and VTM Video Options
TVM-VTM-3GB — Supports 3 Gb/s, 1.485 Gb/s (HD) and 270 Mb/s (SD) format inputs (for
AVM-717, TVM9140PKG, and VTM4140PKG only)
TVM-VTM-JEM — Supports HD and SD-SDI and ASI with jitter analysis and eye pattern
TVM-VTM-EYE-H — Supports HD and SD-SDI with eye pattern
TVM-VTM-SDI-H — Supports HD and SD-SDI
TVM-VTM-SDI-S — Supports SD-SDI only (field upgradeable to HD/SD)
TVM-VTM-ACV-2 — Supports NTSC and PAL
TVM-VTM-ASI— Supports ASI/SMPTE 310 with transport stream analysis
TVM-VTM-DLK — Adds support for RGB (4:4:4) and RGB+A (4:4:4:) (for AVM-717,
TVM9140PKG, and VTM4140PKG only)
VTM Multiformat On-Screen Monitors
Videotek VTM Series™ technology provides high-resolution display of picture,
waveform, vector and optional audio conveniently, in either individual full
screen or concurrent quadrants on any standard computer display.
VTM-2000 — Two SD-SDI and two composite video inputs; fixed-screen layout; XGA output;
optional four-channel audio
VTM-2400 — Two HD/SD-SDI video inputs; fixed-screen layout; XGA output; optional fourchannel audio
VTM4100PKG — Versions available with dual HD/SD, SD only, or composite inputs; SD
only software upgradable to HD/SD; options for additional SDI or ASI inputs, data analyzer, eye
pattern, jitter analysis, and audio
VTM4140PKG — Versions available with dual 3 Gb/s, HD/SD, SD only, or composite inputs;
SD only software upgradable to HD/SD; data analyzer standard; options for additional SDI or
ASI inputs, eye pattern, jitter analysis, dual link, and audio; view up to four inputs at once with
additional input module
TVM, AVM and VTM Audio Options
VTM-A3-OPT 1 — Supports analog, AES and embedded (VTM-2000 and VTM-2400 only)
TVM- or VTM-A3-OPT 2 — Supports analog, AES and embedded (four AES inputs)
TVM- or VTM-A3-OPT 3 — Supports analog, AES and embedded (eight AES inputs)
TVM- or VTM-A3-OPT 5 — Supports analog, AES, embedded and Dolby
display
TVM- or VTM-A3-OPT 3TL — Supports analog, AES and embedded (eight AES inputs);
loudness monitoring with trend chart and true peak to BS.1770
TVM- or VTM-A3-OPT 5TL — Supports analog, AES, embedded and Dolby
metadata display; loudness monitoring with Trend chart and True Peak to BS.1770
*TVM- or VTM-A3-OPT3TO5 — Upgrades A3-OPT 3 or A3-OPT 3TL to add full Dolby
decoding plus metadata display
*TVM- or VTM-A3-OPT V2A — Adds lip sync timing measurement to A3-OPT 3TL or
A3-OPT 5TL
* Please note these are the only audio upgrades for AVM-717; these models are also
available for TVM and VTM Series.
®
plus metadata
®
, plus
®
Generators
VSG-410 — HD/SD and analog video and audio signal generator; outputs include HD, SD
analog composite or tri-level sync; test signal generation, four independently configurable
blackburst (video as HD, SD and analog composite or tri-level sync); vertical interval time code
(VITC) and absolute time reference (DARS) AES and analog audio with independent analog
audio tone channels and user-loadable test signals; also inputs GPS
VSG-201D — SD-SDI serial digital sync generator; infinite genlock, four analog blackburst
outputs, digital black, digital bars and stereo analog tone
VSG-204D — SD-SDI, four analog blackburst outputs (two are separately and independently
adjustable and may be locked to either NTSC or PAL); analog tone plus AES/EBU tone and
embedded audio; digital black output and 10 selectable test signals; 1RU
VSG-201 — Analog color sync and pulse generator with genlock
GEN-STAR — HD-SDI and SD-SDI generator with embedded audio and genlock
module with blackburst, tri-level sync timecode, NTP, DARS output
MTG-3901-SYS-1 — MTG-3901 system with FR-3901 frame; includes two MTG-3901FM modules; one ACO-3901 module, FR-3901 frame with blank front panel, power supply,
detachable power cord, PWRSUPPLY-MTG standalone external secondary power supply, back
modules, (as required), fan module and alarm interconnect module
MTG-3901-SYS-3 — MTG-3901 system with FR-3923 Frame, includes 2 x MTG-3901FM modules, 1 x ACO-3901 module, FR-3923 frame with blank front panel, power supply,
detachable power cord, PWRSUPPLY-MTG standalone external power supply, back modules
(as required), fan module, alarm interconnect module, accepts any combination of up to 9
additional NEO series module.
TSG-3901-1S — HDTV test signal generator
TSG-3901-SYS — NEO HDTV test signal generator with integrated ACO
Please visit www.broadcast.harris.com/videotek for additional models and options.
Demodulators
The Videotek name has long been recognized for its breadth of analog and
digital demodulator products. The Harris Videotek demodulator product line
includes:
DDM-6800+D — Digital demodulator module, 8VSB, 64/256 QAM demodulator to ASI
output for the Harris 6800+™ frame system
DDM-840 — Frequency-agile digital demodulator/decoder, 8VSB, 64/256 QAM demodulator
with MPEG-2 MP-ML 4:2:0 decoder
Analog NTSC Demodulators
DM-100 — 1/3RU utility demodulator
DM-145 and DM-154 — 1RU frequency-agile demodulators
Legalizers, Proc Amps, Color Correctors
DL-810 — SD-SDI legalizer, automatically legalizes SD-SDI video for RGB, encoded and vector-
based limits
DL-860 — HD-SDI and SD-SDI digital legalizer automatically legalizes HD-SDI or SD-SDI video
for RGB, encoded and vector-based limits
SDC-101 — Serial digital color corrector with real-time video processing
RCU-102 — Remote control unit for up to four SDC-101 units. Includes 30 ft. cable
Please visit www.broadcast.harris.com/videotek
for additional options and rackmounts.
The Latest in Video and Audio Monitoring
Television standards and formats come and go, but the
broadcaster’s responsibility to maintain signal quality remains
constant. That’s why the world’s most-discriminating television
program production and distribution facilities have relied on
precision Harris® Videotek® test and measurement solutions for
more than three decades.
The Videotek name is recognized for high-performance
instruments that meet the mission-critical requirements of
broadcasters around the world every day. From customizable
signal analyzers, on-screen monitors and handheld test monitors,
to the latest portable optical fiber tools, file-based QC servers
and 3 Gb/s solutions, Harris offers a high-performance Videotek
product to meet any audio or video monitoring requirement.
All Videotek systems are backed by proven performance,
exceptional service and responsive support.
North America
+1 800 231 9673
Central and Latin America
+1 786 437 1960
For more information, please visit www.broadcast.harris.com/videotek.
Europe, Middle East and Africa
+44 (0) 118 964 8200
Asia, Pacific Rim
+852 2776 0628
25 Dyas Road | North York, ON M3B 1V7 | Tel: (416) 445 9640
Product Support
+1 800 800 5719
Broadcast Communications Division
www.broadcast.harris.com
BR_VIDEOTEK_0410
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.