Atec Dito User Manual

DATA SHEET > dito > 20100706

DITO

ESD SIMULATOR

FOR TESTS ACCORDING TO ...

> Bellcore GR-1089-Core
> Chrysler PF-9326
> DaimlerChrysler PF-10540
> EN 300329
> EN 300340
> EN 300342-1
> EN 300386 V1.3.2
> EN 301489-1
> EN 301489-17
> EN 301489-24
> EN 301489-7
> EN 55024
> EN 61000-4-2
> Fiat 9.90110
> Ford EMC-CS-2009.1
> Ford ES-XW7T-1A278-AB
> Ford ES-XW7T-1A278-AC
> Ford WDR 00.00EA
> IEC 61000-4-2
> IEC 61326
> ISO 10605
> ...

DITO - THE ULTIMATE ESD TESTER

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent
disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated.
dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements.

HIGHLIGHTS

> Most ergonomic design

APPLICATION AREAS

AUTOMOTIVE

RESIDENTIAL

> Light weight (940g)
> Interchangeable discharge tips

INDUSTRY

MILITARY

> Interchangeable R/C networks

MEDICAL

AVIONICS

> Power booster to perform long duration tests
> Library of standard test routines

BROADCAST

COMPONENTS

> Test voltage measurement and control
> Various test routines for testing and evaluation

TELECOM

RENEWABLE ENERGY

www.emtest.com © EM TEST > PAGE 1/4

DATA SHEET > dito > 20100706

TECHNICAL DETAILS

TEST LEVELS

CD mode 500V - 10,000V +/-5%
AD mode 500V - 16,500V +/-5%
Resolution 100V steps
Holding time More than 5 seconds
Polarity Positive, negative
Test voltage measured, indicated in the display

TRIGGER

Single mode Release of single pulses
Continuous mode Continuous discharge up to

20Hz (AD) and 10Hz (CD)

Pulse release via
software

Remote control from computer via
fiber optic link (USB)

OUTPUT

CD mode EN/IEC 61000-4-2; 150pF/330ohm
Rise time 0.8ns +/- 25%
Current 1st peak 7.5A +/- 15% @2kV

15.0A +/- 15% @4kV

22.5A +/- 15% @6kV

30.0A +/- 15% @8kV

Current at 30ns 4.0A +/- 30% @2kV

8.0A +/- 30% @4kV

12.0A +/- 30% @6kV

16.0A +/- 30% @8kV

Current at 60ns 2.0A +/- 30% @2kV

4.0A +/- 30% @4kV

6.0A +/- 30% @6kV

8.0A +/- 30% @8kV

OPERATION

Manual Via function keys
Remote control Via built-in optical interface

VOLTAGE SUPPLY

Battery (ACCU) More than 50,000 pulses @ 16.5kV;

automatic power-off after 10 minutes
if not operated

Mains supply Via mains supply adapter (MAD)

GENERAL DATA

Weight 940 gramms incl. battery
Case material ABS; non-inflammable as

per UL 94VO
Temperature 5°C - 40°C (operation conditions)
Rel. humiditiy 20% - 80% (operation conditions)
Battery charger 100V - 240V +/-10%; 50/60Hz

Charging time less than 1.5 hours

ACCESSORIES

DM1 150pF/330ohm discharge module

with built-in contact discharge relay;

Discharge tips for AD and CD
ACCU Rechargeable battery
ACH Battery charger

Transportation case, grounding lead

2m, test certificate and operation

manual

TEST ROUTINES

Easy Zap Test based on standard levels
Quick Zap All test parameters are adjustable

during test; fast and easy-to-use

Evaluation Air discharge with 20Hz; for test

point evaluation on the DUT

Standard Test
routines

As per EN/IEC 61000-4-2,
EN 61000-6-1/-6-2

Set-up Parameters, standard levels, etc.

DISPLAY AND CONTROLS

Display LCD graphic display; 128 x 64 pixels
Operation 5 function keys, 2 cursor keys, pulse

trigger

www.emtest.com © EM TEST > PAGE 2/4