solution for pass/fail partial discharge testing; incorporating
all
standards for PD testing. We’ve eliminated
d features associated with fully
PD detectors. The DDX9101 simply measures
to
help you modernize your facility at an affordable price and
is housed in a
. Or, if
you need a complete new test system, the detector can be
testing
buttons
select the desired
operation mode (magnitude meter or oscilloscope mode) and
fier settings. Calibrate the
measurement setup, set the maximum acceptable PD level
voltage is
applied to the test object, an indicator on the screen tells you
and a PC
are greatly expanded. All
defined
can then be used to generate customized
with graphs and charts. The user can also take
“snapshots” of the ellipse any time during a test. It’s just like
The most distinguishing feature of the DDX9101 advanced
software is its ability to operate and monitor multiple
detectors simultaneously. If you are a manufacturer
DDX9101
can now be linked to a single PC enabling remote controls,
/remote control
DDX 9101
Partial Discharge Detector
performing routine PD tests in multiple bays, each
monitoring and acquisition of all data.
The DDX 9101 partial discharge detector belongs to
very succ
all the basic functions of an analogue detector and meeting
IEC and IEEE/ANSI
the costly, advance
computerized
the level of PD and the applied test voltage. It’s designed
it’s simple to operate.
DDX9101 is a straightforward replacement for older analogue
detectors of any make or model. The system
3U 19” rack mount case designed to slide into a rack
integrated with an AC power supply for production PD
of HV components.
This simple-to-use detector is controlled via 8 control
on the front panel. To operate the detector,
choose the appropriate ampli
and you are ready to start the test. Once the
if the test object passed or failed the test.
With the data acquisition / remote control software
(optional) the capabilities of the unit
data is acquired during the test according to userparameters, the data
test reports
that camera on your old analogue scope, only easier.
FEATURES
Settable PD threshold with indicator light when limit is
exceeded
Ethernet port for communication with a PC (optional)
Data acquisition and remote control software package
Two modes of operation - meter mode or scope mode
Compact, 3U (19”) rack mount case ideal for integrating
into a test system
BENEFITS
Perfect for pass/fail testing – you set the allowable PD
level and the unit determines pass and fail.
Simple to use – 8 buttons on the front panel are all you
need to operate the detector.
Straightforward replacement – if you’ve got an old
analogue unit and need a cost effective, simple replacement.
Multiple detector – with the data acquisition
software you can operate and monitor multiple detectors at
the same time.
Integrated test systems – because of it’s compact design
and functionality this unit is ideal for an integrated PD test
system including an AC power supply.
APPLICATIONS
Testing of:
Distribution Transformers
Power Transformers
Current and Potential Transformers
Rotating Machines
Switchgears
Surge Arrestors
Cables
Research & Development
Universities
etc.
Haefely has a policy of continuous product improvement. Therefore w e reserve the right to change design and sp ecification without notice. LL_DDX9101_1207_RK – 1111////4444
of Hubbell Incorporated.
a brand of
Haefely is a subsidiar y
cator bar includes three sets of test
are the user
settings.
shows if the
lights when
PD Meter
light when the meter reading is beyond the scale of the
meters. The light in the middle is the pass/fail indicator for PD
d limit and shows in red
used to
enter the parameters and select settings for the unit and the
test. The function menu bar along with the up/down buttons
ly the user with control and the ability to set/alter the
two
graphical modes are available to view the test results: meter
(in
color) together with different meter modes makes monitoring
you have opted to only
view the magnitudes of the partial discharge. In meter mode,
discharge and one
for voltage. You can select two different types of meters: a
type digital
display. In either mode you select the update rate as either
scilloscope. You
display as an ellipse, straight
Gating features are also available in scope
Main Screen / Front Panel Details
Test Status Indicator Bar
The test status indi
indicators to aid during testing. On the left side
selected
On the right side are indicator lights: a
auto-range feature is enabled and
the device is actively auto-ranging. The
Range, Low Pass Filter
and
High Pass Filter
uto-range
auto-ranging
Voltage
and
O/R
levels that are over the user define
during a “failed” test.
Function Menu Bar
The six buttons along side (the function menu bar) are
supp
test setup.
Main Screen
The test results are displayed on the main screen and
mode and scope mode. The threshold shown graphically
of the test results simple.
When operating in the meter mode,
two meters are displayed: one for partial
traditional analogue meter display or a bar-
fast or slow.
The scope mode display looks just like an o
select the type of oscilloscope
line or a sine wave.
mode.
Scope mode gives
you the ability to
see more than just
the magnitude of
the PD and allows
a knowledgeable
user to perform
diagnosis of the
source of the PD.
You can also
choose whether
there’s a single or
double gate, the
start point, and
the width to gate
out undesirable
interferences.
Haefely has a policy of continuous product improvement. Therefore w e reserve the right to change design and sp ecification without notice. LL_DDX9101_1207_RK – 2222////4444
of Hubbell Incorporated.
a brand of
Haefely is a subsidiar y
acquisition and analysis software
allows a wide variety of possibilities like recording PD pulses
occurring during each and every test voltage cycle and
discharge
level versus voltage and testing time for each channel in one
customized graph. Any time during the test the partial
discharge levels can be monitored and after the completion
for the multiple channels
shots
module, several
the
monitored channels (when equipped with a multiplexer) can
be displayed and recorded. Snaps shots of the 3D patterns
can be saved into a windows gallery for further uses like
customised test report generation or to export them as image
sliced views further permits a
detailed look at the PD pattern as deep as every cycle of the
applied test voltage and in certain cases, helps separate and
t reports with
defined fields (logos, tabular / graphical
shots, etc). The reports can be further
and charts and the data
ue (CSV)
DATA ACQUISITION & ANALYSIS
The optional advanced data
analyzing them both in the time and phase domain.
A chart recorder provides a hard copy of partial
of the test, customized test reports
can be generated automatically populated with snapfrom interesting events.
customized test reports
customized test reportscustomized test reports
Software Display
Pattern Acquisition And Analysis Module
With the pattern acquisition and analysis
two- and three-dimensional PD pulse patterns of all
files. Data filters and time-
identify noise interferences
Test Reports
Test report generator allows generation of tes
pre-defined or userdisplay of results, snapsaved as HTML files containing graphs
can be additionally exported as comma separated val
format for further analysis.
TECHNICAL SPECIFICATIONS
Amplifier
Gain (Attenuation) 0 dB to 75 dB in 5 dB steps
Attenuator Accuracy 1 %
Gain 3000
Input Impedance 50 Ω
System Noise
IEC-60060 Part 1 & Part 2
IEC-60270
IEC-885-2 and IEC-885-3
IEEE Std. 4, 1995
ICEA T-24-380
ASTM D1868-93
ANSI C57.113
ANSI C57.124-91
< 12 µV referred to input on
highest gain range
Low Pass - 100, 200, 400, 500 kHz
< 1 %
< 1 %
Peak / √2, true RMS
(automatic)
0°C to 40°C
-10°C to 75 °C
Haefely has a policy of continuous product improvement. Therefore w e reserve the right to change design and sp ecification without notice. LL_DDX9101_1207_RK – 3333////4444
of Hubbell Incorporated.
a brand of
Haefely is a subsidiar y
quadripole is a
fully configurable quadripole system
RIV
has a voltage divider
arm fitted to it for voltage
ave high
self resonant frequencies, high stability
and low partial discharge levels. They
are mounted on a base with a suitable
zeros in AC wave shape)
and kilovoltmeter input. Not suitable for
housing stackable with DDX 9121a. This
Accessories for PD testing
CALIBRATORS
KAL 451
KAL 451
KAL 451KAL 451
9216
9216
92169216
KAL 9530
KAL 9530
KAL 9530KAL 9530
The KAL 451 is a battery powered PD
calibrator for direct coupling of the
generated PD signal to the test object
according to the related standards IEC
60270 and IEEE 454. Pulse outputs
ranges are 2 – 200pC and 20 – 2000pC.
The pulse rise time is < 20ns.
The 9216 is a small battery powered PD
calibrator for direct coupling of the
generated PD signal to the test object
according to the related standards IEC
60270 and IEEE 454. Pulse outputs
ranges are 10, 100, 1’000, 10’000 pC.
The RIV calibrator (KAL 9530) includes
a signal generator, RIV calibration set,
clamp and a switching unit for
calibration as per ANSI and NEMA
standard.
MEASURING IMPEDANCES
AQS 9110
AQS 9110aaaa
AQS 9110AQS 9110
The AQS 9110 Passive
optimized for PD and
measurement. It
lowmeasurement.
COUPLING CAPACITORS
TK series
TK series
TK seriesTK series
PSF
PSF
PSFPSF
The coupling capacitor / HV AC divider
consists of 1 unit, built into a glass
fibre reinforced epoxy tube. The top
electrode allows partial discharge free.
For PD measurements an appropriate
coupling quadripole must be added.
PSF (Power Separation Filter) h
PD SIMULATORS
753
753----US
US
753753
USUS
The Miniature Partial Discharge
Simulator is a compact, battery
operated discharge simulator. It injects
a known multiple pulse PD signal into a
PD test circuit to allow verification of
calibration. The unit also incorporates a
fine frequency control for synchronizing
to a multiple of the mains frequency.
MULTIPLEXER
DDX91
DDX9106a
06a
DDX91DDX91
06a06a
3 to 1 manual multiplexer in a separate
www.tettex.com
China (Sales & Service Office)
Haefely Test AG – Beijing Office
No. 67, Chaoyang Road, Chaoyang District
8-1-602, Fortune Street
Beijing, 100025
P. R. China
+ 86 10 8578 8099
+ 86 10 8578 9908
sales@haefely.com.cn
top electrode and a low voltage arm.
Outputs are provided for PD detector
input, overload sensing circuit, pulse
mark (indicates
RIV measurements.
includes the piloting software with full
functional feature set, including 3D
displays, analysis and reporting tools.
North America
Hipotronics Inc.
1650 Route 22
PO Box 414
Brewster, NY 10509
USA
+ 1 845 279 3644
+ 1 845 279 2467
sales@hipotronics.com
Haefely has a policy of continuous product improvement. Therefore w e reserve the right to change design and sp ecification without notice. LL_DDX9101_1207_RK – 4444////4444
of Hubbell Incorporated.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.