Atec APS-FC200 User Manual
The FC 200 Series frequency
and voltage converters are
economically priced and offer
top of the line performance.
The series consists of two 1 phase output instruments
in sizes of 500VA and 1kVA. The converters allow the user
to duplicate a utility grid of either 50 or 60 hertz for export
product testing or operation of imported equipment.
The frequency can also be adjusted to 400 hertz
for applications such as the testing of military/avionics
equipment or for the operation of 400 hertz electronics
that are onboard an aircraft or a military vessel.
The adjustable frequency band of 45 to 500 Hertz in
conjunction with the dual voltage ranges of 0-150 volts
or 0-300 volts provides full capabilities for testing and
operating electronics worldwide.
Setup and operation of the FC 200 Series is exceptionally
easy. The simple front panel layout allows users to
continuously vary voltage and frequency or to select preset
standard frequency settings. Individual meter displays
provide digital readouts for frequency, voltage and current
while a digital multimeter displays power or power factor.
The FC 200 Series converters are a simple and cost
effective solution for all of your AC power conversion needs!
Worldwide
Supplier
of Power
Conversion
Equipment
Toll Free 1-866-517-8400 www.adaptivepower.com
TM
Key Features & Specifications for the FC 200 Series
• Output Power: 500VA and 1kVA (for larger 1-phase sizes
up to 40kVA see the APS 1000 Series)
• Output Frequency: 45-500Hz
• Output Voltage: Dual range, 0-150V or 0-300V, 1 phase
• Isolated Output, THD: < 0.5%
• Input Requirements: 115/230VAC ± 15%, 1 phase, 47-63Hz
• Intuitive Front Panel Controls: Frequency, Voltage and
Current Limit
• Easy to Read LED Displays: Frequency, Voltage,
Current and Power or Power Factor
• Memory Locations: Can save three desired settings
of any voltage, frequency and current limit covered in
the output parameters
• Power Outlets: Universal, Domestic and International
Connectors
• Option: PLC Remote Interface which includes 7 memory
locations
INPUT SPECIFICATIONS
Input Phase 1-phase / 2-wire + Ground
Input Voltage 115/230Vac ± 15%
OUTPUT SPECIFICATIONS
Power rating 500VA 1000VA
Max Arms @ 0-150V 4.2A 8.4A
Max Arms @ 0-300V 2.1A 4.2A
Phase 1-phase / 2-wire + Ground
Low Range 0-150V
High Range 0-300V
Resolution 0.1V
Accuracy ± (0.5% of setting+2 counts)
Range 45 - 500Hz
Resolution 0.1Hz at 45 - 99.9Hz, 1Hz at 100 - 500Hz
Accuracy ± 0.2%
Harmonic Distortion ≤ 0.5% (Resistive Load)
Crest Factor ≥ 4 to 1
Load Regulation ± 0.5% (Resistive Load)
Protection Over-Current, Short-Circuit, Over-Temperature
Operating Temperature 32°F - 104°F (0°C - 40°C), 80% Relative Humidity
Altitude Below 6,500 feet
DISPLAY AND CONTROLS
4 Digital LED meters Frequency, Voltage, Current, Power or Power Factor (simultaneously)
Memory (Standard) 3 Memories, 3 Programmable Parameters per Memory for:
Voltage, Frequency, Current Limit
Calibration Front Panel Calibration
Auto-Voltage Adjust Provides improved voltage regulation to within ± 0.1V
MECHANICAL SPECIFICATIONS
Power Rating 500VA 1000VA
Dimensions (In.)
H/D/W
3.5 x 16 x 17 3.5 x 22 x 17
Wieght kg/lb
22/48 37/81
©2006 ADAPTIVE POWER SYSTEMS, Ardmore, OK, U.S.A. Subject to change without notice.
PLC Remote Interface
Output
Output
Input
Input
Input Power Selector
Input Power Selector
PLC Remote Interface
Fans
801 Hailey Street Ardmore, OK 73401
Direct: 949-752-8400 • Fax: 949-756-0838
Toll Free: 1-866-517-8400
www.adaptivepower.com
TM
FC200-11/06
MODEL FC205 FC210
Voltage
(r.m.s.)
Frequency
FC205 FC210
Fans
Loading...