Atec APS 3000 User Manual

The APS 3000 Series frequency and voltage converters are economically priced and offer top of the line performance.

The series consists of seven 3 phase output instruments

ranging in size from 3 kVA to 90 kVA. The converters allow

the user to duplicate a utility grid of either 50 or 60 hertz

for export product testing or operation of imported

equipment. The frequency can be adjusted to 400 hertz

for applications such as the testing of military/avionics

equipment or for the operation of 400 hertz electronics that

are onboard an aircraft or a military vessel. The adjustable

frequency band of 45 to 500 Hertz in conjunction with the

dual line to neutral voltage ranges of 0-150 volts or 0-300

volts provides full capabilities for testing and operating

electronics worldwide.

Setup and operation of the APS 3000 Series is

exceptionally easy. The simple front panel layout allows

users to continuously vary voltage and frequency or

to select preset standard frequency settings. Individual

meter displays provide digital readouts for frequency,

voltage and current while a digital multimeter displays

power or power factor.

The APS 3000 Series converters are a simple and cost

effective solution for all of your AC power conversion needs!

Worldwide

Supplier

of Power

Conversion

Equipment

Toll Free 1-866-517-8400 www.adaptivepower.com

Key Features & Specifications for the APS 3000 Series

• Output Power: 3 kVA to 90 kVA

• Output Frequency: 45-500 Hz

• Output Voltage: Dual range, 150/260 V or 300/520 V,

3 phase

• Isolated Output, THD: < 1%

• Input Requirements: 220, 240, 380, 415, 480 VAC

± 10%, 3 phase, 47-63 Hz (3kVA and 6kVA, 230VAC ± 15%, 1 phase)

• Intuitive Front Panel Controls: Frequency and Voltage

• Easy to Read LED Displays: Frequency, Voltage, Current,

Power and Power Factor

• Memory Locations: Can save three desired settings

of any voltage, frequency and current limit covered in the output parameters

MODEL 3003 3006 3009 3015 3030 3060 3090

INPUT SPECIFICATIONS

Phase 1Ø/2W + ground 3Ø/3W + ground

Voltage 230V±15% 220, 240, 380, 415, 480V±10%

Frequency 47-63Hz

OUTPUT SPECIFICATIONS

Power rating

Total Power 3kVA 6kVA 9kVA 15kVA 30kVA 60kVA 90kVA

Per Phase 1kVA 2kVA 3kVA 5kVA 10kVA 20kVA 30kVA

Max Arms per Ø @ 0-150 V 8.4 A 16.8 A 25.2 A 42.0 A 84.0 A 168.0 A 252.0 A

Max Arms per Ø @ 0-300 V 4.2 A 8.4 A 12.6 A 21.0 A 42.0 A 84.0 A 126.0 A

Phase 3Ø/5W

Voltage

Line to Neutral 0-150V/0-300V Selectable

Line to Line 0-260V/0-520V Selectable

Resolution 0.1V

Accuracy ±(1%+0.2V)

Frequency

Range 45-500Hz

Resolution 0.1Hz at 45-99.9Hz, 1Hz at 100-500Hz

Accuracy ±0.2%

Harmonic Distortion ≤1%(Resistance Load)

Crest Factor ≥3 to 1

Load Regulation ±0.5%

Protection Over Current, Short Circuit, Over Temperature

Efficiency ≥85% (at full load)

Operating Temperature 32°-104°F, (0°-40°C), 80% Relative Humidity

Altitude below 6500 feet

DISPLAYS AND CONTROLS

4 Digital LED meters Frequency, Voltage, Current, Power or Power Factor (simultaneously)

PLC Remote Interface P1, P2, P3, and Output On/Off

Memory 3 Programmable Memory Locations for Voltage, Frequency and Current

Calibration Front Panel Calibration

Interface (optional) GPIB, or RS-232

Auto voltage adjust Enable for improved voltage regulation within ±0.1V

MECHANICAL SPECIFICATIONS

3kVA 6kVA 9kVA 15kVA 30kVA 60kVA 90kVA

Dimensions (HxDxW) Inches 29x26x17 29x26x17 32x36x24 32x36x24 38x36x24 55x36x24 71x36x48

Weights (Kg/lbs) 105/230 120/265 220/485 290/640 460/1010 760/1675 1200/2640

Cooling fans

Output curcuit breaker

Output connections

Input curcuit breaker

801 Hailey Street Ardmore, OK 73401

Direct: 949-752-8400 • Fax: 949-756-0838 Toll Free: 1-866-517-8400 www.adaptivepower.com

APS3000-9/06

Instrument Specifications

Input connections

Casters