Atec Agilent-8350B User Manual

8350B Sweep Oscillator
Mainframe (Discontinued ­Support Information Only)

Data Sheet

General Specifications

Operating Temperature: 0 to 55 °C
Power: 100, 120, 220, or 240 V ±10%, 50 to 60 GHz @ 375 V-A including RF Plug-in
Size: 425 mm W x 133.3 mm H x 422 mm D (16.75 in x 5.25 in x 16.6 in)
Net Weight (without RF unit): 16.5 kg (36.4 lb); Shipping Weight (without RF unit): 22.7 kg (50 lb)
Display Resolution (power): 0.1 dB
Mi n imum S weep T ime Single Band: 10 ms Agilent 83596B/97B/98A/9A Only: 20 ms Full Band: Agilent 83590A,

83592A/B: 25 ms
RF Output Connector Agilent 83590A/92A/92B/92C: Type-N, female Agilent 83594A/95A/95C: 3.5 mm, male
Agilent 83596B/97B/98B/99A: 2.4 mm, male

Output Characteristics

Minimum Settable Power: -5 dBm Agilent 83592B/95C Only: -2 dBm Agilent 83596B/97B/98A/99A Only: -12 dBm
Source Output VSWR (50 ohm nominal): <1.9, typical Agilent 83596B/97B/98A/99A Only: <2.0
Externally Leveled Power Variation (typical) Crystal Detector or Power Meter: ±1.5 dB, typical
Power Sweep Range: >12 dB Agilent 83592C/94A/95A Only: >9 dB Agilent 83956B/97B/98A/99A Only: >12 dB (22

dB <20 GHz) Accuracy (including linearity): ±1.5 dB, typical Resolution (displayed): 0.1 dB
Power Slope Range: 0-5 dB/GHz, to maximum power sweep range Linearity: 0.2 dB, typical Resolution (displayed):

0.01 dB/GHz

Modulation Characteristics

External AM (typical) Frequency Response: 100 kHz Control Range: 15 dB Sensitivity: 1 dB/V
Internal Square-Wave Modulation: 1 kHz or 27.8 kHz square wave On/Off Ratio: >30 dB
External Pulse Modulation (typical) Rise/Fall Time: <=50 ns Min Pulse Width Internally Leveled: <=5 µs Unleveled:

<=200 ns Agilent 83596B/97B/98A/99A only: <=1 µs
External FM Max Deviations for Modulation Frequencies dc to 100 Hz: ±75 MHz 100 Hz to 1 MHz: ±7 MHz 1 MHz
to 2 MHz: ±1 MHz Sensitivity: -20 or -6 MHz/V