Atec Aemc-OX-7202, Aemc-OX-7204 User Manual

3

3

W

A

R

R

A

N

T

Y

Y

E

A

R

OSCILLOSCOPES

Handheld Oscilloscope

III

Models OX7202

& OX7204

III

Features

200MHz

SPECIFICATIONS

MODELS OX7202

InteRFace

Screen Specifications
Display Mode
No. of Traces on Screen
Front Panel Control
Screen Control

veRtIcal

Vertical Sensitivity

Bandwidth
Channels
Accuracy
Input Impedance
Max Input Voltage

Vertical Zoom

hoRIzontal

Time Base Speed
Accuracy
Horizontal Zoom

dIgItal MeMoRy

Max. Sampling Speed
Vertical Resolution
Memory Capacity per Channel
User Memory
Other Modes
XY Mode

otheR FunctIons

Autoset
Trigger Mode
FT Analyzer & Math Functions
Cursors
Power Source
Battery Life
Communication

Four traces and four references – split screen and full screen modes (tracing zone 110 x 74)

Two or three cursors: V and T simultaneous or Phase Resolution 12 bits, display four digits

Color 5.7" LCD (115 x 86mm) 320 x 240 – CCFL backlighting

Touch screen – "Windows-like" menus and graphic commands

16 ranges from 2.5mV – 200V/div and up to 156µV/div in verticle zoom mode

Two isolated channels Four isolated channels

dc, 600Vrms, 850Vpk (DC + peak AC at 1kHz) without 10/1 probe

600V

accuracy ± 0.1% - Roll mode from 100 ms to 200 s/div

100GS/s in ETS – 2.5GS/s in Single Shot Mode on each channel

Between two from the four traces – math functions and cursors

Complete autoset < 3s with recognition of channels, Frequency >30Hz

III

Vectors with interpolation

32 direct shortcuts

(12-bit converter) – Accuracy ± 1% of Reading

200MHz

±0.1% of Reading

1MΩ ± 0.5%

1000Vrms with 10/1 probe

derating -20 dB/decade from 100kHz to 200MHz

x5 maximum

35 ranges from 1ns/div to 200s/div

x100 maximum

12 bits

“TRC” approx. 10kB, “TXT” approx. 20kB

2MB

Envelope mode (Factors from 2 to 64)

Automatic Triggered, Single shot, Auto Level 50%

FT, +, –, x, / – Editor of mathematical functions

Rechargeable 9V 3.8Ah battery (included)

Four hour operation when fully charged

Ethernet, RS-232, Web Server

OX7204

• 5 complementary tools in a single

instrument: Oscilloscope, FFT Analyzer,
Multimeter/Wattmeter, Harmonic Analyzer
on voltage/current/power and Recorder

• Sampling rate 2.5GS/s in one-shot mode and

100GS/s in ETS mode (repetitive signals)

• 2 or 4 isolated measurement channels

(600V CAT III) and up to 8 traces on screen

• 2 or 4 independent TRMS digital multimeters

(8000 counts, 200kHz)

• LCD touch screen and Windows-like

menus on screen

• Probix “plug & play” input terminals

and smart sensors

• Standard “real-time” FFT analysis and

calculation functions on channels

• Multi-interface communication connectors:

RS232, Centronics and Ethernet

• Memory depth of up to 50,000

points per channel (Oscilloscope
and Recorder modes)

• Triggering on measurement

III

thresholds in Oscilloscope and
Multimeter modes

• NEW – Adapter for

measuring up to 700V

ac

RMS 1000Vdc in meter mode

• NEW – Web Server

(FTP server/client) with
cursors and automatic
measurements

• NEW – MiniFlex

®

sensors,

powered by the instrument

• NEW – Power measurement

option included for your
power measurements

• NEW – Adapter for

measuring up to 700V

ac

RMS 1000Vdc in meter mode

Model OX7202

III

Kit

64

www.aemc.com

Technical Assistance [phone]

Four Tools in One!

OSCILLOSCOPES

Recorder

III

The OX

Series supports a great variety of sensors
(voltage, current, temperature, 0 to 10V, 4 to 20mA,
etc) and displays them in their original physical scale
and units.

Oscilloscope

Multimeter

Automatic recording of the measured values are
stored in memory on all active channels allowing
review of periods lasting from five minutes
to 24 hours.

Probe accessory options for Models OX7102

®

AmpFlex
3kA, 200kHz
Catalog #2124.91

0.5A to

Analyzer

Harmonic analysis results are displayed in
bargraph form.

III

& OX7104

III

Triggering menu allows
selection of type,
duration, delay, count
and more using touch
screen drop-down
menu.

CATALOG NO. DESCRIPTION

2124.58

2124.59

2124.67

2124.68

Accessories (Optional)

2124.75 PROBIX PRHX5, 50Ω Adapter

2124.91 AmpFlex

2124.92 MiniFlex® 0.5A to 300A, 3MHz for use with Oscilloscope OX Series

Handheld Oscilloscope Model OX7102
Handheld Oscilloscope Model OX7202

Handheld Oscilloscope Model OX7104
Handheld Oscilloscope Model OX7204

®

0.5A to 3kA, 200kHz for use with Oscilloscope OX Series

III

100MHz

III

200MHz

III

100MHz

III

200MHz

MiniFlex® 0.5A to
300A, 3MHz
Catalog #2124.92

PROBIX PRHX5

Ω

Adapter

50
Catalog #2124.75

Technical Assistance [phone] www.aemc.com 65

Model OX 7102

Ships with the following:

III

- (2x100MHz)

Cat. #2124.58

PRODUCT PACKAGING

Portable Oscilloscope OX 7102

(Qty. 1)

Cat. #2124.58

(Qty. 2)

PROBIX PRHX1, 1/10 Probe

Cat. #2124.73

Aluminum Carrying Case

III

PROBIX Banana Plug Adapter

(Qty. 1)

Cat. #2124.79

(Qty. 2)

Cat. #2124.76

(Qty. 1)

USB Cable

Cat. #2124.96

(Qty. 1 each)

Power Adapter 115/230V &

Razor Power Cord 110V US Plug

Cat. #5000.21 & #5000.22

(Qty. 1)

NiMH Battery Pack

Cat. #2140.19

(Qty. 2)

Stylus

Cat. #5000.17 - replacement set of 5

(Qty. 2 red, 2 black)

Grip Probes

Cat. #2124.86

Ethernet Cable - Crossed

(Qty. 1)

Cat. #2124.81

(Qty. 1)

Ethernet Cable - Straight

Cat. #2124.80

Also Included:

• SX-METRO Software on CD-ROM

• User Manual on CD-ROM in Paper Sleeve

• Three-Year Warranty Card

• Recorder/Harmonic/Power/50K Memory

Color-coded Leads (1.5m) with Probe Tips

(Qty. 2 red, 2 black)

Cat. #2124.85

Rev. 00 - 1/11 OX Marketing Product OverView 1

Option (installed)

• Quick Reference User Manual