Atec Aemc-ox-7102, Aemc-OX-7104 User Manual
OSCILLOSCOPES
3
3
W
A
R
R
A
N
T
Y
Y
E
A
R
Portable Oscilloscope
II
Models OX 7102-C
OX 7104-C
SPECIFICATIONS
MODELS OX 7102-C
InteRFace
Screen Specifications
Display Mode
No of Curves on Screen
Front Panel Control
Screen Control
veRtIcal
Verticle Sensitivity
Bandwidth
Channels
Accuracy
Input Impedance
Max. Input Voltage
Vertical Zoom
hoRIzontal
Time Base Speed
Accuracy
Horizontal Zoom
dIgItal memoRy
Max. Sampling Speed
Vertical Resolution
Memory Capacity per Channel
User Memory
Other Modes
XY Mode
otheR FunctIons
Autoset
FT Analyzer & Math Functions
Cursors
Power Source
Battery Life
Communication
56
www.aemc.com
II
Four traces and four references – split screen and full screen modes (tracing zone 110 x 74)
16 ranges from 2.5mV – 200V/div and up to 156µV/div in verticle zoon mode
Two isolated channels Four isolated channels
Complete autoset < 3s with recognition of channels, Frequency >30Hz
Two or three cursors: V and T simultaneous or Phase Resolution 12 bits, display four digits
Color 5.7" LCD (115 x 86mm) 320 x 240 – CCFL backlighting
Touch screen – "Windows-like" menus and graphic commands
50GS/s in ETS – 1GS/s in one shot mode on each channel
Between two from the four traces – math functions and cursors
&
II
(12-bit converter) – Accuracy ± 1%
600V CAT III – derating -20dB/decade at 100kHz
35 ranges from 1ns/div to 200s/div
“TRC” approx. 10kB, “TXT” approx. 20kB
Envelope mode (Factors from 2 to 64)
FT, +, –, x, / – Editor of mathematical functions
Rechargeable 9V 3.8Ah battery (included)
Four hour operation when fully charged
Vectors with interpolation
32 direct shortcuts
100MHz
±0.1%
1MΩ ± 0.5%
x5 maximum
±1.5%
x10 maximum
12 bits
2MB
Ethernet, RS-232, Web Server
Features
• 5 complementary tools in a single
instrument: Oscilloscope, FFT Analyzer,
Multimeter/Wattmeter, Harmonic Analyzer
on voltage/current/power and Recorder
• Sampling rate 1GS/s in one-shot mode and
50GS/s in ETS mode
• 2 or 4 isolated measurement channels
(600V CAT III) and up to 8 curves on screen
• 2 or 4 independent TRMS digital multimeters
(8000 counts, 200kHz)
• LCD touch screen and Windows-like menus
on screen
• Probix “plug & play” input terminals and
smart sensors
• Standard “real-time” FFT analysis and
calculation functions on channels
• Multi-interface communication connectors:
RS232, Centronics and Ethernet
• NEW – Memory depth of up to 50,000
points per channel (Oscilloscope and
Recorder modes)
• NEW – Triggering on measurement
thresholds in Oscilloscope and
Multimeter modes
• NEW – Web Server
(FTP server / client) with
OX 7104-C
II
• NEW – MiniFlex
• NEW – Power measurement
Technical Assistance (800) 343-1391
cursors and automatic
measurements
powered by the instrument
option included for your
power measurements
Model OX 7104-CII Kit
™
sensors,
Four Tools in One!
OSCILLOSCOPES
Recorder
The Model OX 7104-CII supports a great variety of
sensors (voltage, current, temperature, 0 to 10V, 4 to
20mA, etc) and displays them in their original physical
scale and units.
Oscilloscope
Multimeter
Automatic recording of the measured values are
stored in memory on all active channels allowing
review of periods lasting from five minutes
to 24 hours.
Analyzer
Harmonic analysis results are displayed in
bargraph form.
Probe accessory options for Models OX 7102-CII & OX 7104-C
®
AmpFlex
3kA, 200kHz
Catalog #2124.91
0.5A to
II
Triggering menu allows
selection of type,
duration, delay, count
and more using touch
screen drop-down
menu.
MiniFlex™ 0.5A to
300A, 3MHz
Catalog #2124.92
CATALOG NO. DESCRIPTION
2124.57 Portable Oscilloscope Model OX 7102-CII Kit (2x100MHz, Color)
2124.65 Portable Oscilloscope Model OX 7104-C
2124.94 Oscilloscope C
Accessories (Optional)
2124.75 PROBIX PRHX5, 50Ω Adapter
2124.91 AmpFlex
2124.92 MiniFlex™ 0.5A to 300A, 3MHz
Kit includes: Oscilloscope; two PROBIX PRHX1 1/10 Probes 250MHz, 600V CAT III; two PROBIX 4mm banana plug adapter; one US power
adapter (115V, 60Hz); one battery pack, NiMH 9.6V, 3.8Ah; two set-of-two color-coded leads, 1.5m (red/black) with needle probe tips; two
Ethernet cables (one straight / one crossed); two set-of-two grip probes (red/black); two stylus; aluminum carrying case, SX-METRO data
processing and analysis software; Recorder/Harmonic/Power/50K Memory Option (installed); three-year product warranty and registration card,
and user manual on CD-ROM.
Kit includes: Oscilloscope; four PROBIX PRHX1 1/10 Probes 250MHz, 600V CAT III; four PROBIX 4mm banana plug adapter; one US
power adapter (115V, 60Hz); one battery pack, NiMH 9.6V, 3.8Ah; four set-of-two color-coded leads, 1.5m (red/black) with needle probe tips;
two Ethernet cables (one straight / one crossed); four set-of-two grip probes (red/black); two stylus; aluminum carrying case; SX-METRO data
processing and analysis software; Recorder/Harmonic/Power/50K Memory Option (installed); three-year product warranty and registration card,
and user manual on CD-ROM.
Kit includes: One PROBIX K Thermocouple adapter; three MiniFlex™ 0.5A to 300A, 3MHz sensors; three set-of-two color-coded leads,
1.5m (red/black) with color-coded alligator clips; small classic tool bag.
II
Series Power Kit (4x100MHz, Color)
®
0.5A to 3kA, 200kHz
II
Kit (4x100MHz, Color)
Technical Assistance (800) 343-1391 www.aemc.com 57
Loading...