Atec AEMC-ML912 User Manual

DATA LOGGERS

Simple Logger® II TRMS Current

Dual Channel MiniFlex® Model ML912

Two channel AC recording logger incorporates two selectable measurement ranges

SpecificationS

MODEL ML912

ELECTRICAL

Channels

Input

Range

Accuracy (50/60Hz)

Resolution

Sample Rate

Storage Rate

Storage Modes

Recording Length

Memory

Communication

Power Source

Battery Life

MECHANICAL

Dimensions

Max Conductor Size

Weight (with battery)

Case

Vibration

Shock

Drop

Captive MiniFlex

0.5 to 100Aac 5 to 1000Aac

0 to 1A unspecified

1 to 100A:

±(1% of Reading + 0.5A)

Programmable from 8 every second to 1 every day

Start/Stop, FIFO, Extended Recording Mode (XRM

15 minutes to 8 weeks, programmable using DataView

240,000 measurement (512KB)

The recorded data is stored in non-volatile memory

and will be retained even if the battery is low or removed.

USB 2.0 optically isolated

2 x 1.5V AA-cell Alkaline batteries (included)

(dependent on storage rate/recording length)

4.95 x 2.75 x 1.28" (136 x 70 x 32mm) w/o Sensor

Sensor: 6" (152mm)/Cable: 6 ft (2m)

IEC 68-2-6 (1.5mm, 10 to 55Hz)

Two

AC Current Flexible Sensors

0 to 5A unspecified

±(1% of Reading + 1A)

0.1A

64 samples/cycle

100 hrs to >45 days

8.67 oz (245g)

UL94-V0

IEC 68-2-27 (30G)

IEC 68-2-32 (1m)

5 to 1000A:

™

)* and Alarm

featureS

• Includes two integral MiniFlex® flexible

current probes that will measure from

0.5A to 1000A TRMS with 0.1A resolution

• Dual range 100/1000A user selectable

per channel

• 64 samples per cycle

• Programmable storage rates from 8

every second to 1 every day

• 4 user selectable storage modes

• Stores up to 240,000 measurements

in non-volatile memory

• Powered by standard

Alkaline batteries

• Lightweight, compact, fits anywhere

• 5 LED indicators quickly and clearly

display logger status

• Includes FREE DataView® software

for data storage, real-time display, analysis and report generation

• Isolated USB 2.0 communication

cable included

• EN 61010-1; 600V CAT IV,

1000V CAT III

applicationS

• Single and Split phase load monitoring

• Neutral and ground current monitoring

• Intermittent problem detection

• Harmonic current monitoring using

DataView

• Machine load monitoring

• Fault current detection

• Load profiling

software

CATALOG NO. DESCRIPTION

2126.37 Simple Logger® II Model ML912 (2-Channel, TRMS, MiniFlex®, 100/1000Aac, DataView® software)

www.aemc.com

Technical Assistance (800) 343-1391