Atec AEMC-8435 User Manual

Special

product

features

▼

POWER QUALITY ANALYZERS, METERS & LOGGERS

Three-Phase Power Quality Analyzer

PowerPad® III Model 8435

Memory capacity of 2GB

for trend data storage:

Up to 50 captured snapshots, 210 captured

transients, 1 inrush

and 10,000 alarm events

Four voltage and four current inputs

SPECIFICATIONS

MODEL 8435

ELECTRICAL

Sampling Frequency Data Storage

Voltage (TRMS) Phase-to-Phase: 2000V

Current (TRMS)

Frequency (Hz) 40 to 69Hz Other Measurements

Harmonics Power Source

Battery Life

MECHANICAL

Communication Port Display

Dimensions Weight Safety Rating

(1)

Crest factor at 6500 = 1

PRODUCT INCLUDES

8435 Kit

Extra large tool bag, accessory pouch, 5 ft USB cable, five 10 ft black voltage leads with alligator clips, 110V US power cord, four water-tight

AmpFlex Cat. #2136.42 only), NiMH battery, SD-Card (2GB), twelve color-coded input ID markers, quick start guide, and a USB stick containing DataView software and user manual.

A196-18-BK (included with

IP 67

Rated

cover closed

256 samples/cycle

2GB SD Card for trend recording;

Additional separate 12.5MB partitioned memory for

snapshots, transient/inrush & alarms

Phase-to-Neutral: 1000V

Voltage Ratio: up to 500kV

MN Clamp: 0 to 6A/120A or 0 to 240A

SR Clamp: 0 to 1200A

MR Clamp: 0 to 1000A

MiniFlex®: 10 to 1000A

AmpFlex

ac, 0 to 1400Adc

: 10 to 6500A

Current Ratio: 10mA to 50kA

kW, kVAR, kVA, PF, DPF, kWh, kVARh,

kVAh, K-Factor, Flicker

to 50th, Direction, Sequence

9.6V NiMH rechargeable battery pack (included)

External AC supply: 110/230VAC ±10% (50/60Hz)

≥8 hours with display on; ≤35 hours with display off

(record mode)

Optically isolated USB

¼ VGA (320 x 240) color LCD display with adjustable

brightness & contrast

9.8 x 7.8 x 2.6" (250 x 200 x 67mm)

4.3 lbs (1.95kg)

EN 61010, 600V CAT IV

(2)

Pollution Degree 2

(2)

When used with SR193 or AmpFlex® probes.

600V CAT III with MN193 or MR193 probes.

(upon registering)

(1)

, 1000V CAT III,

NEW!

FEATURES

• Measurement of TRMS voltages up to 1000Vrms AC/

DC for two-, three-, four- or five-wire systems

• Measurement of TRMS currents up to 6500Arms

(sensor dependent)

• Direct measurement of neutral current & voltage

• Frequency measurement (40 to 69Hz systems)

• Record and display trend data as fast as once

per second for one month for up to 25 variables

• Transient detection on all V and I inputs (up to 210)

• Selectable PT and CT ratios

• Inrush current measurement

• Calculation of Crest Factors for V and A

• Calculation of the K-Factor for transformers

• Calculation of short-term flicker and three-phase

voltage unbalance

• Measures harmonics (referenced to the fundamental

or RMS value) for voltage, current or power, up to 50 harmonic

• Displays of harmonic sequencing and

direction and calculation of overall harmonics

• Real-time display of Phasor diagrams

including values and phase angles

• Measurement of active, reactive and apparent power

per phase and their respective sum total

• Calculation of power factor, displacement power factor

and tangent factor

• Recording, time stamping and characterization of

disturbance (swells, sags and interruptions, exceedence of power and harmonic thresholds)

• 2GB internal Trend Recording memory; Alarm,

Snapshot and Transient/Inrush memories are separate

• Measurement of energy VAh, VARh & Wh

• The Max and Min RMS measurements are

calculated every half-period

• Includes DataView

software for configuring, real-time

display, analysis and report generation

• 65μs/sample transient recording

www.aemc.com

Technical Assistance (800) 343-1391

PowerPad® III Model 8435

Large Color Functional Displays

Installation of the Leads and Current Sensors

Color-coded ID markers are supplied with the PowerPad input terminals.

III to identify the leads and

Configuration

Inrush Peak

Transient Mode

Phasor Diagram

Trend Analyze

The voltage and current

inputs as well as the

power cord connection

are constructed with screw on, watertight

Cat. #2140.74

(For Cat. # 2136.42 only)

Cat. #2140.74

connectors rated to

IP67.

Cat. #2140.73

CATALOG NO. DESCRIPTION

2136.41 PowerPad® III Model 8435 (No Sensors - Waterproof IP67)

2136.42 PowerPad

2133.73 Extra Large Classic Tool Bag

2140.72 Replacement accessory pouch (accessories not included)

2140.19 Replacement – Battery 9.6V NiMH

2140.28 AC Current Probe Model MR193-BK (1000A

2140.32 AC Current Probe Model MN93-BK (200A)

2140.33 AC Current Probe Model SR193-BK (1200A)

2140.35 AmpFlex

2140.36 AC Current Probe Model MN193-BK (5A/100A)

2140.45 Replacement – Set of 12, Color-coded Input ID Markers

2140.46 Replacement – 5 ft USB Cable

2140.48 MiniFlex

2140.73

2140.74 AmpFlex

Lead – One 10 ft (3M) Black Lead (Waterproof cap) [Rated 1000V CAT IV] & one Black Alligator Clip [Rated 1000V CAT IV, 15A,UL]

III Model 8435 w/4 A196-18-BK (AmpFlex® - Waterproof IP67)

ac/1400Adc)

Sensor 36" Model 193-36-BK (6500A)

Sensor 10" Model MA193-10-BK (1000A)

Sensor 18" (Waterproof - IP67) Model A196-18-BK

Harmonics Mode

Technical Assistance (800) 343-1391

www.aemc.com