Atec AEMC-6550, AEMC-6555 User Manual

Read our technical

tips on Insulation

Resistance Testing

►

MEGOHMMETERS

10,000 & 15,000V Digital

Models 6550 & 6555

Expert tools for testing insulation

safely and accurately; ideal for use

NEW!

on rotating machinery and cables

operating at higher voltages

SpecificationS

MODELS 6550 6555

INSULATION TESTS

Test Voltage 500V

1000V 2500V 5000V

10,000V 15,000V

Fixed Test Voltages

Variable Voltages

Ramp Mode Ramp Configuration Range Step Mode Voltage Measurement After Test Capacitance Measurement Leakage Current Measurement Discharge After Test Additional Test Stop Modes

I-Limit

Early-Break di/dt

Timer

Burn Mode Ratio Calculation Calculation of R at ref. T° Measurement Display Filter Graphs on Display Storage Communication PC Software Power Supply

Battery Charging Electrical Safety EMC, Mechanical Protection,

Altitude Dimensions/Weight

500/1000/2500/5000/

Variable: 40V to 10kV

Three user programmable

voltage schemes

Programmable ramps: start voltage/end voltage/duration

40 to 1100V/500 to 10,000V 40 to 1100V/500 to 15,000V

Up to 10 steps (voltage and duration configurable for each step)

256 registers, stores 80,000 points: R, V, I and date

NiMH rechargeable batteries, two 9.6V 4Ah battery packs

charging by external voltage: 90 to 260V; 50/60Hz

Battery charging allowed while performing insulation measurements

13.39 x 11.81 x 7.87" (340 x 300 x 200mm)/approx. 6.2kg

10kΩ to 2000GΩ (2TΩ)

10kΩ to 4000GΩ (4TΩ) 10kΩ to 10,000GΩ (10TΩ) 10kΩ to 15,000GΩ (15TΩ) 10kΩ to 25,000GΩ (25TΩ)

– 10kΩ to 30,000GΩ (30TΩ)

500/1000/2500/5000/

10,000V

10,000/15,000V

Variable: 40V to 15kV

Three user programmable

voltage schemes

0 to 2500V

ac; 0 to 4000Vdc

0.05 to 9.999μF/10.00 to 49.99μF 0 to 8mA

Yes/Automatic

Programmable: 0.2 to 5mA

Up to 99 minutes 59 seconds

Constant testing

PI, DAR, DD

Yes

3 filters with 3 possible time-constants

R(t)+V(t); I(t); I(V)

USB optically-isolated port

DataView

1000V CAT IV; IEC61010-1 and IEC 61557

EN 61326-1, IP54, 3000m

(excluding accessories)

Special product

features

▼

DataView® Software

Included with Models 6550 & 6555

product includeS

One red, blue and black 9 ft 15kV,

one 15kV jumper leap (blue), integral lead, one

red, blue and black alligator clip (1000V CAT IV),

one red and blue test probe (1000V CAT IV),

optical USB cable, US 115V power cord, small

classic tool bag, user manual

See page 16 for ordering information

Technical Assistance (800) 343-1391 www.aemc.com 15

Special

MEGOHMMETERS

product

features

10,000 & 15,000V Digital

▼

MEGOHMMETERS

5000V Digital

Models 6550 & 6555

All stored test results presented on screen.

Displays

featureS

• True Megohmmeter

• Fixed or programmable test voltage from

40V to 10kV/15kV

• Wide measurement range from 10kΩ to 30TΩ

• 5mA charging current

• Step voltage testing

• Ramp voltage testing

• Automatic calculation of DAR / PI / DD /∆R

(ppm/V) ratios

• Large, backlit graphical LCD screen with

digital display, bargraph and R(t)+V(t), I(t) and I(V) graphs

• Multiple test modes: voltage ramp and step

with “Burn-In”, “Early-Break” and “I-Limit” modes

• Three filter settings to optimize measurement

stability

• Calculation of R at a reference temperature

• Storage of 80,000 measurements

• Includes DataView® software for data

storage, real-time display, analysis and report generation

• Optically-isolated USB communication

for transfer onto PC and report generation with DataView® software

Clear and straight forward set up of parameters.

CATALOG NO. DESCRIPTION

2130.31

2130.32

www.aemc.com

Megohmmeter Model 6550 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V, 2500V, 5000V, 10kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB w/DataView

Megohmmeter Model 6555 (Graphical, Analog Bargraph, Backlight, Alarm, Timer, 500V, 1000V, 2500V, 5000V, 10kV, 15kV, Ramp, StepV, Variable, Auto DAR/PI/DD, USB w/DataView

Real-time display of measurement results.

software)

Technical Assistance (800) 343-1391

+ 1 hidden pages