Atec AdaptivePowerSystems-1000 User Manual
The APS 1000 Series frequency
and voltage converters are
economically priced and offer
top of the line performance.
The series consists of seven 1 phase output instruments
ranging in size from 2 kVA to 40 kVA. The converters allow
the user to duplicate a utility grid of either 50 or 60 hertz
for export product testing or operation of imported
equipment. The frequency can be adjusted to 400 hertz
for applications such as the testing of military/avionics
equipment or for the operation of 400 hertz electronics
that are onboard an aircraft or a military vessel.
The adjustable frequency band of 45 to 500 Hertz in
conjunction with the dual voltage ranges of 0-150 volts
or 0-300 volts provides full capabilities for testing and
operating electronics worldwide.
Setup and operation of the APS 1000 Series is
exceptionally easy. The simple front panel layout allows
users to continuously vary voltage and frequency or
to select preset standard frequency settings. Individual
meter displays provide digital readouts for frequency,
voltage and current while a digital multimeter displays
power or power factor.
The APS 1000 Series converters are a simple and cost
effective solution for all of your AC power conversion needs!
Worldwide
Supplier
of Power
Conversion
Equipment
Toll Free 1-866-517-8400 www.adaptivepower.com
TM
Key Features & Specifications for the APS 1000 Series
• Output Power: 2 kVA to 40 kVA
• Output Frequency: 45-500 Hz
• Output Voltage: Dual range, 0/150 V or 0/300 V,
1 phase
• Isolated Output, THD: < 1%
• Input Requirements: 220, 240, 380, 415, 480 VAC
± 10%, 3 phase, 47-63 Hz (2kVA, 3kVA
and 5kVA, 230VAC ± 15%, 1 phase)
• Intuitive Front Panel Controls: Frequency and Voltage
• Easy to Read LED Displays: Frequency, Voltage, Current,
Power and Power Factor
• Memory Locations: Can save three desired settings
of any voltage, frequency and current limit covered in
the output parameters
MODEL 1002 1003 1005 1010 1020 1030 1040
INPUT SPECIFICATIONS
Phase 1Ø/2W + ground 3Ø/3W + ground
Voltage 230V±15% 220, 240, 380, 415, 480V±10%
Frequency 47-63Hz
OUTPUT SPECIFICATIONS
Power rating 2kVA 3kVA 5kVA 10kVA 20kVA 30kVA 40kVA
Max Arms @ 0-150 V 16.8 A 25.2 A 42 A 84 A 168 A 252 A 336 A
Max Arms @ 0-300 V 8.4 A 12.6 A 21 A 42 A 84 A 126 A 168 A
Phase 1Ø/3W (L, N, G)
Voltage
Low Range 0-150V
HIgh Range 0-300V
Resolution 0.1V
Accuracy ±(1%+0.2V)
Frequency
Range 45-500Hz
Resolution 0.1Hz at 45-99.9Hz, 1Hz at 100-500Hz
Accuracy ±0.2%
Harmonic Distortion ≤1%(Resistance Load)
Crest Factor ≥3 to 1
Load Regulation ±0.5%
Protection Over Current, Short Circuit, Over Temperature
Efficiency ≥85% (at full load)
Operating Temperature 32°-104°F, (0°-40°C), 80% Relative Humidity
Altitude below 6500 feet
DISPLAYS AND CONTROLS
4 Digital LED meters Frequency, Voltage, Current, Power or Power Factor (simultaneously)
PLC Remote Interface M1, M2, M3, and Output On/Off
Memory 3 Programmable Memory Locations for Voltage, Frequency and Current
Calibration Front Panel Calibration
Auto voltage adjust Enable for improved voltage regulation within ±0.1V
MECHANICAL SPECIFICATIONS
2kVA 3kVA 5kVA 10kVA 20kVA 30kVA 40kVA
Dimensions (HxDxW) Inches 12x26x17 12x26x17 12x26x17 28x26x17 34x26x17 38x36x24 43x36x24
Weights (Kg/lbs) 60/132 65/143 80/175 200/440 315/695 465/1025 550/1210
©2003 ADAPTIVE POWER SYSTEMS, Irvine, CA, U.S.A. Subject to change without notice.
Cooling fans
Output curcuit breaker
Output connections
Input curcuit breaker
801 Hailey Street Ardmore, OK 73401
Direct: 949-752-8400 • Fax: 949-756-0838
Toll Free: 1-866-517-8400
www.adaptivepower.com
TM
APS1000-9/06
Instrument Specifications
Input connections
Casters
Loading...