Atec Aaronic-6000 User Manual

Precompliance test antenna series HyperLOG®60xxx

span 680MHz to 18GHz

A logper antenna for the complete frequency range from 680MHz to 18GHz

Data sheet

References / examples of proof:

BMW, München, Germany
Hewlett Packard, Dornach, Germany
Audi AG, Ingolstadt, Germany
DLR, Köln, Germany
University of Florida, USA
IBM, Stuttgart, Germany

w

w

w

w

w
w

1

M a d e i n Ge r m a n y

Rev 1.8

10.01.2013

The log-periodic precompliance test antenna
of the HyperLOG®60xxx series are suitable
for interference field strength measurement.
The specialized broadband characteristics
allow measurements to be taken in the com­plete specified frequency range without

switching.
These antennas are suitable for measure­ment according to the following stan­dards and procedures:

CISPR, VDE, MIL, VG, EN 55011, EN 55013,
EN 55015, EN 55022, MIL-Std-461.

Calibration & standards:

w

w

Optimal for usage with spectrum analysers
for EMC measurement
Top-quality high-tech TEFLON antenna sup­port
Excellent forward/backward ratio

Freely alignable polarisation
Excellent symmetry of radiation patterns
Integrated 1/4" tripod socket

Suitable for mobile use
Made in Germany

10 years warranty

Highlights:

w

w

w
w

w
w

w

w

w

HyperLOG®60xxx-Antenna

Typical calibration data with up to
1734 calibration points (10MHz
steps)

Aluminum design carrycase with
custom padding
Sturdy, detachable pistol grip with
"miniature tripod" mode
Special Aaronia SMA toolset with over­torque protection

Included with delivery:

w

w
w

w

w

2

Gain Diagram HyperLOG 6080

Gain Diagram HyperLOG 60100

Antenna factor HyperLOG 6080

Antenna factor HyperLOG 60100

Specifications

Design: Logarithmic-periodic
Frequency range: 680MHz-8GHz
Max. transmission power: 100 W CW
(400MHz)
Nominal impedance: 50 Ohms

VSWR (typ.): <1:2,5
Gain (typ.): 5dBi

Antenna factor: 22-44dB/m
Calibration points: 733 (10MHz steps)
RF connection: SMA socket (18GHz) or
N socket using an adapter
Dimensions (L/W/D): (340x200x25) mm
Weight: 250gr

Warranty: 10 years

Design: Logarithmic-periodic
Frequency range: 680MHz-10GHz
Max. transmission power: 100 W CW
(400MHz)
Nominal impedance: 50 Ohms

VSWR (typ.): <1:2,5
Gain (typ.): 5dBi

Antenna factor: 22-46dB/m
Calibration points: 933 (10MHz steps)
RF connection: SMA socket (18GHz) or
N socket using an adapter
Dimensions (L/W/D): (340x200x25) mm
Weight: 250gr

Warranty: 10 years

HyperLOG®6080: HyperLOG®60100:

w
w
w

w
w
w
w

w

w
w

w

w
w
w

w
w

w
w

w

w
w
w

w

w

Horizontal Pattern HyperLOG 60xx Series Vertikal Pattern HyperLOG 60xx Series

Gain Diagram HyperLOG 60180

Antenna factor HyperLOG 60180

Design: Logarithmic-periodic
Frequency range: 680MHz-18GHz
Max. transmission power: 100 W CW
(400MHz)
Nominal impedance: 50 Ohms

VSWR (typ.): <1:2,5
Gain (typ.): 5dBi

Antenna factor: 22-50dB/m
Calibration points: 1733 (10MHz steps)
RF connection: SMA socket (18GHz) or
N socket using an adapter
Dimensions (L/W/D): (340x200x25) mm
Weight: 250gr

Warranty: 10 years

HyperLOG®60180:

w
w
w

w
w

w
w

w

w
w
w

w

With their log-periodic measurement antennas
from the HyperLOG®60xxx series, Aaronia
finally offers a very cost-effective alternative,
which at the same time meets the highest
expectations. In conjunction with the
HyperLOG®antennas, every regular spectrum
analyser becomes a fully professional directio­nal RF measurement device within a few
moments. Thus, a perfect "dream team" for
EMC measurement in the laboratory or for out­door use is at your disposal.

Due to their small weight and the multi-functio­nal handle, these antennas are the optimal
supplement for portable EMC measurement
devices for locating and evaluating any kind of
signal source.

The HyperLOG®60xxx logper antennas come standard
with a specially constructed, high tech radom housing.
This housing has been constructed after intense rese­arch with the most modern computer technology in such
a way that its shape, material and special coating have
virtually no influence on measurements, not even in
case of dew or other kinds of humidity collecting on the
surface. Another important factor for Aaronia was the
development of a radom with the lowest possible dam­ping factor achievable. This turned out to be quite an
adventure for our development team, particularly in the
high GHz ranges. Fortunately, this adventure has been
mastered resulting in a beautiful, elegant design, to the
complete satisfaction of the development team. Our first
test measurements even by far surpassed our guideli­nes!
The resulting antenna had the best possible protection
against mechanical stress and environmental influence
without sacrificing any of its performance.

Included with delivery: A sturdy aluminum
design carrycase with custom padding for the
antenna, cables and accessories. Furthermore,
every antenna of the HyperLOG®60xxx series
includes a detachable multi-functional pistol grip
with "miniature-tripod" mode and an appropriate
SMA toolset.

3

Description

HyperLOG 70xx Antenna with pistol grip expanded as a miniature tripod

Also available in a "transparent" finish at extra charge

Lot of space for optionally accessories:
The HyperLOG®transportcase