Atec 930i User Manual
Speed, Flexibility & Value
At Vitrek, we believe that your investment
in safety compliance equipment is an
important one. The 930i Ground Integrity
Analyzer is a case in point. The output
current is fully user selectable from 3 to
30 amperes. So whether you’re testing to
a UL spec at 25 amps today or an IEC
spec at 30 amps tomorrow, you can be
sure that your Vitrek will stand up to the
test for years to come.
In fact, all test parameters of the 930i are
fully programmable-output current,
frequency, resistance limits and test
duration. And whether you’re running the
930i from its password protected test
database or via computer control, ground
bond testing has never been simpler or faster.
Measurement Confidence
That is Second to None
To provide unparalleled accuracy, the
Vitrek 930i employs a state of the art high
speed, 4-channel, 16 bit analog to digital
converter. The 930i simultaneously tracks
and controls the output current, while
measuring voltage drop across the load,
and monitoring the status of both power
supply and output amplifier.
The four-wire Kelvin configuration eliminates lead resistance errors to provide
measurement repeatability down to 10µΩ.
Performance that the other units cannot
begin to match.
Seamless Test Integration
The 930i works hand-in-hand with Vitrek
hipot testers so that dielectric testing and
ground bond testing can be accomplished
from a single set up. The results are
automatically integrated into a unified test
report with overall pass/fail status as well
as step-by-step results with final values.
Providing confidence in every test you
make is our job. Isn’t it time to put the
unrivaled performance of the 930i to
work for your team?
The Ultimate in Ground
Bond Analyzer Performance
•3 to 30 amp test current - meets a wide
variety of regulatory test specifications
• Password protected test routine storage
•Frequency synthesis 50-400Hz
•10µΩ resolution - more measurement
confidence and repeatability
• 4-wire Kelvin sensing - eliminates lead
resistance errors
• Fully programmable via front panel,
hipot or computer control
•Hipot and ground test from one set-up
•High speed test throughout with actual
measurement values
• Display prompted setup - easy to use,
fully adjustable
•CEmark certified to EN 61010
•Made in the U.S.A.
•5 Year extended warranty
Speed, Flexibility & Value
Measurement Confidence
That is Second to None
Seamless Test Integration
WORLD LEADERS IN COMPLIANCE AUTOMATION
SM
Alternating Current Output
Range: 3 to 30 amperes RMS, programmable
Resolution: 1 amp
Output Frequency: Sinewave synthesis,
50Hz to 400Hz
Compliance Voltage: 3 volts RMS
Regulation: ±0.25% no load to full load
Resistance Measurement
Resistance Limit: User programmable max.
and min. Test is automatically aborted when
limit is exceeded
Resistance Range: 1Ω at 3 amps linearly
decreasing to 100 m
Ω at 30A
Resistance Resolution: 10µΩ
Measurement Accuracy: ± 1.0% of reading;
± 0.5% of range
Accuracy: Specifications apply for 1 year, ±
5°C from the cal temp within 20°C to 30°C
Calibration: Certificate of calibration traceable to the National Institute of Standards
and Technology (NIST) provided
Test Time: Digital count down timer, programmable 1 to 9999 seconds
Terminal Configuration: Tr ue four-wire kelvin
General Specifications
Remote Interface: VICL and serial
com standard. PLC optional
Display: 40 character dot matrix illuminated
liquid crystal display
Indicators: L.E.D. status indicators
Alarm: Audible and visual alarms provide
pass/fail indication
Diagnostics: Built-in self diagnostics test
ROM, RAM and output system
Safety: CE mark certified to EN61010
Accessories: K-2, VIC-3, BBL-2 and opera-
tors manual supplied with unit
Warranty: Extended 5 year parts and labor
with annual factory calibration and maintenance. Standard warranty one year
Operating Temperature: 0°C to 50°C
Humidity: 90% RH 0°C to 40°C
Power: 115/230 VAC ± 10% 250 VA max
Dimensions: 89mmH x 432mmW x 457mmD
(3.5”H x 17”H x 18”D)
Weight: 11Kg (24 lb.) Net/15Kg (34 lb.)
shipping
Ordering Information
Vitrek 930i Automatic Ground
Integrity Analyzer . . . . . . . . . . . . . . . . . . .
TL115HC Outlet Test Adapter . . . . . . . . . .
K-4 4-wire 4-clip 30A lead set. . . . . . . . . .
K-2 4-wire 2-clip 30A lead set. . . . . . . . . .
RM-1 Rack Mount Adapter Kit . . . . . . . . .
PLC-3 Logic Level Interface . . . . . . . . . . .
RS-1 RS232 Cable 6 ft. . . . . . . . . . . . . . .
VIC-3 930i to 944i 2 Meter
Communication Cable. . . . . . . . . . . . . . . .
OM-930 Extra Operators Manual. . . . . . . .
Represented by:
The 930i shown here with the Vitrek 944i Dielectric Analyzer and TL-115HC Test Adapter. These two
units in tandem provide hipot and ground bond test capability from the touch of a single button.
Vitrek Corporation
www.vitrek.com
9880A Via Pasar – San Diego, CA 92126
Voice: 858-689-2755 Fax: 858-689-2760
Email: info@vitrek.com
Prices and specifications subject to change without notice.
©Copyright 1998. Vitrek Corporation. All rights reserved.
CLC-ILU 50K
Alternating Current Output
Resistance Measurement
General Specifications Ordering Information
WORLD LEADERS IN COMPLIANCE AUTOMATION
SM
Loading...