Atec 800PL User Manual
800PL Series
DC Hipot Testers
The 800PL Series DC hipot testers are an
economical solution to DC field testing of
cables, terminations, motors, generators and
other electrical apparatus. Models 815PL and
880PL10-MA offer 15kV or 80kV respectively.
All models are self-contained in a single,
rugged and durable enclosure, which is
complete from input line cord to high voltage
output cable. Cable storage space is
conveniently located inside.
The 800 Series testers feature accurate kV
meter readings regardless of load current.
Accurate voltage and current measurements
are assured via voltage readings that are taken
directly at the output of the high voltage
transformer and current measurements are
taken in the return leg. Safe discharging of
both the test object and the high voltage
transformer occur whenever the high voltage is
turned off. Output power is provided by
means of a full-wave voltage doubling rectifier
circuit with silicon rectifiers.
Features
; Rugged, portable single-piece
construction
; Shielded output cable
; Full-wave voltage doubling rectifier circuit
; Zero start interlock and guard circuit
; Internal discharge solenoid
; Meter accuracy ± 2% full scale
; 10 mA current rating for cable charging
; External interlock provisions
; Three range voltmeter
; Four range current meter
; No internal leakage at full load
; Instantaneous overload relay
; Surge-limiting resistors in HV output
Benefits
Ideal for field testing – compact, lightweight and
rugged makes it suitable for field orientated
applications
Operator Safety – the power supply and test object
are automatically grounded when high voltage is
turned off and there is no exposed high voltage
Simple to Use - a minimal amount of setup time and
a simple control panel allows simple testing every time
Accurate Leakage Current Measurement - while
guard circuit eliminates stray leakage currents
Applications
DC Hipot testing of:
ÎCable
ÎTransformers
ÎElectrical Switchgear
ÎMotors
ÎGenerators
ÎOther Electrical Apparatus
Subject to technical modifications without notice. 800PL-DS / 11.2003
Technical Specifications
General 815PL 880PL-10MA
Input Voltage
Output Voltage 0 -15 kV 0 - 80 kV
Output Current 5 mA 10 mA
Polarity Negative output, positive ground
Metering + 2% full scale accuracy
Ripple 0.5% per mA with rated resistance
Weights and Dimensions (W x H x D, net weight, ship weight)
815PL 17” x 14” x 15” (43 x 36 x 38 cm) 49 lbs (22 kg) 64 lbs (29 kg)
880PL-10MA 17” x 14” x 15” (43 x 36 x 38 cm) 78 lbs (35 kg) 90 lbs (41 kg)
Scope of Supply
Qty. 1 DC Power Supply (815PL or 880PL-10MA)
Qty. 1 Input Line Cord, wire & plug, grounded type 6 feet (1.8 m)
Qty. 1 Return Cable, 25 feet (7.6 m)
Qty. 1 High Voltage Output cable, shielded RG34/U with alligator
clip and rubber insulated boot, 25 feet (7.6 m)
Qty. 1 Interlock Plug
Qty. 1 Calibration Certificate
Qty. 1 User’s Manual
120 V, 50/60 Hz for -A version
230 V, 50/60 Hz for -B version
Ordering Information
System
15 kV, 5 mA DC Hipot 815PL-A or 815PL-B
80 kV, 10 mA DC Hipot
Accessories
Spare Parts Kits
880PL-10MA-A or
880PL-10MA-B
SPK1-815PL or
SPK1-880PL-10MA
Control Panel
European Contact Locate your local USA Contact
Haefely Test AG
Lehenmattstrasse 353
CH-4028 Basel
Switzerland
+ 41 61 373 4111
+ 41 61 373 4912
| sales@haefely.com
sales representative at
www.high-voltage-hubbell.com
| sales@hipotronics.com
Hipotronics Inc.
1650 Route 22
Brewster, NY 10509 USA
+ 1 845 279 8091
+ 1 845 279 2467
PO Box 414
Subject to technical modifications without notice. 800PL-DS / 11.2003
Loading...