Atec 6CP User Manual

Download

GIS

MATERIALS

PORTABLE

TRANSFORMER

CIRCUIT

BREAKER

Field and Lab AC Dielectric Test Sets

15-200 kV

➤ A premier line of AC Dielectric Test Sets with ratings

from 15 to 200 kVAC

➤ Lightweightandruggedlyconstructedforyearsofelduse

➤ Units feature easy to read digital instrumentation

 andclean,efcientcontrols

➤ Simple set-up and operation

➤ Low partial discharge output

Model 6CP200/100-10

TESTING APPLICATIONS

Suitable for dielectric testing a wide range of electrical apparatus

CABLE

SWITCHGEAR

Specications are subject to change without notice.

Brochure No. 60700

MOTOR

Model 6CP30/15-3

GENERATOR

INSULATION

Model 6CP120/60-7.5

RECLOSER

PROTECTIVE

EQUIPMENT

SAFETY & DESIGN FEATURES DESCRIPTION

• 2 or 3 piece designs

• Circuit breaker protection

• External interlock provision

• High voltage On/Off pushbuttons with indicator

• Zero Start interlock

• Manual control of output voltage

• Adjustable overload circuit

• Slow and fast-acting transient protection on all meters and relays

• Digital timer with audible alarm

• Digital multi range metering

• Emergency Off pushbutton with key lockout

• Guard mode for accurate current measurements

• Output overload indicator with reset switch

• All interconnect control and power cables are included

• Cable storage provision

• Two copies of operation/ maintenance manual

This portable rugged line of AC high voltage test equipment is ideally suited for use in the eld or in the laboratory. The 6CP line offers a complete test system in a mobile package. All units in the 6CP line use a combination control and regulator enclosure and a separate high voltage section. The system is equipped with advanced digital metering, and control and protection devices which are easy to use and provide the operator with all necessary information to safely operate the system. The Metering Guard Mode allows accurate measurements of the high voltage test specimen leakage current by bypassing stray capacitive currents. The high voltage section consists of a specially designed oil insulated high voltage transformer characterized by use of an isolating cylindrical housing mounted on a rugged steel base. The high voltage output is equipped with a corona free aluminum shielding electrode. The high quality design and construction is key to the superior partial discharge performance of the 6CP line. The system arrives ready to use with all power and interconnect cables included; the simple setup allows this 6CP to be ready for testing in minutes. The rugged construction and dependability, backed by long-term warranty makes the 6CP line an ideal choice for your high voltage testing requirements.

110-120 V, 16 A 110-120 V, 16 A 110-120 V, 30 A 110-120 V, 30 A 220-240 V, 8 A 220-240 V, 8 A 220-240 V, 15 A 220-240 V, 15 A

INPUT

Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz

≈ 0-30 kV, 100 mA ≈ 0-50 kV, 60 mA ≈ 0-100 kV, 75 mA

OUTPUTFEATURESPD

5 min ON/15 min OFF 3 kVA 7.5 kVA 10 kVA 15 min ON/1 hr OFF 2 kVA 5 kVA 7.5 kVA

DUTY

CYCLE

1 hr ON/1 hr OFF 1.5 kVA 3 kVA 5 kVA

66% Inductive + Selectable Capacitive Preload

Metering Accuracy 0.8% Reading +.2% Full Scale Voltmeter Range(s) 0-15/30 kV 0-10/50 kV 0-50/100 kV 0-60/120 kV 0-50/100 kV 0-60/120 kV 0-100/200 kV

Output HV Electrode

PD level <10 pC Optional up to 100kV <3 pC

Power Cable 10’(3048 mm) 30’(9144 mm) Power Interconnect 10’(3048 mm) 20’(6096 mm) Meter Interconnect 10’(3048 mm) 20’(6096 mm) Ground 10’(3048 mm) (2) 20’(6096 mm) each

CABLES

Return 10’(3048 mm) 20’(6096 mm) 10’(3048 mm)

INCLUDED

Divider Metering n/a n/a 30’(9144 mm) Paralleling n/a n/a 10’(3048 mm)

MODEL 6CP30/15-3 6CP50/10-3 6CP100/50-7.5 6CP120/60-7.5 6CP100/50-10 6CP120/60-10 6CP200/100-10

Voltage/Current

Compensation

Currentmeter Range(s)

≈ 0-15 kV, 200 mA ≈ 0-10 kV, 300 mA ≈ 0-50 kV, 150 mA ≈ 0-60 kV, 125 mA ≈ 0-50 kV, 200 mA ≈ 0-60 kV, 167 mA ≈ 0-100 kV, 100 mA

≈ 0-120 kV, 62.5 mA

50% Inductive Reactive 50% Inductive Reactive

0-200 µA/2 mA/ 0-200 µA/2 mA/

20 mA/200 mA 20 mA/300 mA

220-240 V, 30 A 220-240 V, 30 A 220-240 V, 25 A

≈ 0-100 kV, 100 mA ≈ 0-120 kV, 83 mA ≈ 0-200 kV, 5

0-200

A/ 2 mA/ 20 mA/ 200 mA

(3) 30’(9144 mm) ea

0 mA

ENVIRONMENTAL CONDITIONS

• 10-40°C, indoor/outdoor in fair weather

www.phenixtech.com

• Humidity <95% non-condensing

• Altitude <3000 ft (1000 meters)

optional optional 22.5”(572mm) x 29.25”(743mm) x 50”(1270mm)

61 lbs(28 kgs) 70 lbs(32 kgs) 61 lbs(28 kgs)

1 x11.25”(286mm)

30 lbs(14 kgs) 52 lbs(24 kgs) 63 lbs(29 kgs)

14” (356 mm) 14” (356 mm) 16”(406mm) 19”(483mm) 14” (356 mm) 14” (356 mm) 16”(406mm) 19”(483mm) x 19”(483mm) x 30”(762mm) 19”(483mm) 17” (432 mm) 17” (432 mm) 30”(762mm) 53”(1346mm)

76 lbs (34 kgs) 80 lbs (36 kgs) 178 lbs(81 kgs) 255 lbs(116 kgs) 280 lbs(127 kgs) 280 lbs(127 kgs)

9”(229mm)

DIMENSIONS & WEIGHTSSHIPPING SIZES

9”(229mm) 43”(1092mm) 40 lbs(18 kgs)

Cables Weight 6 lbs (3 kgs) 20 lbs(9 kgs) 30 lbs(14 kgs)

Total Unit Weight 112 lbs (51 kgs)

21” (533 mm) 21” (533 mm) 34”(864mm) 34”(864mm) 34”(864mm) 34”(864mm) 34”(864mm) 21” (533 mm) 21” (533 mm) 27”(686mm) 27”(686mm) 27”(686mm) 27”(686mm) 27”(686mm) 16” (406 mm) 16” (406 mm) 56”(1422mm) 56”(1422mm) 56”(1422mm) 56”(1422mm) 56”(1422mm) 37 lbs (17 kgs) 37 lbs (17 kgs)

20” (508 mm) 20” (508 mm) 34”(864mm) 20” (508 mm) 20” (508 mm) 27”(686mm) 20” (508 mm) 20” (508 mm) 56”(1422mm) 83 lbs (38 kgs) 86 lbs (39 kgs) 372 lbs(169 kgs)

34”(864mm) 27”(686mm) 56”(1422mm) 66 lbs(30 kgs)

MODEL 6CP30/15-3 6CP50/10-3 6CP100/50-7.5 6CP120/60-7.5 6CP100/50-10 6CP120/60-10 6CP200/100-10

Length Width Height

Cart(s)

Controls

HV Tank(s)

HV Divider

Package 1

Package 2

Package 3

Weight

Length Width

Height

Weight

Length

Width

Height

Weight

Length

Width Height

Weight

Length

Width Height

Weight

Length

Width Height

Weight

Length

Width Height

Weight

6.5”(419mm) x 15.25”(388mm)

116 lbs (53 kgs)

311 lbs(141 kgs) 388 lbs(176 kgs) 443 lbs(201 kgs) 443 lbs(201 kgs) 656 lbs(298 kgs)

353 lbs(160 kgs) 430 lbs(195 kgs) 485 lbs(220 kgs) 485 lbs(220 kgs) 420 lbs(191 kgs)

21.25”(540mm) x 16.75”(426mm) x 13.75”(349mm)

HV Divider is internal

240 lbs(109 kgs) 222 lbs(101 kgs)

+1.301.746.8118

PHENIX Technologies is committed to providing leadership, innovation,

technology, quality, and service in all areas of our business.

Our 70,000 square-foot headquarters is a modern manufacturing facility.

All aspects of electrical, mechanical, and software design and production

are performed in this facility and controlled by an ISO9001 certied quality

program. Our engineers offer a unique blend of theoretical knowledge

and practical experience. Our Service and Calibration Department assists

customers during and after installation to ensure years of trouble free service.

We carry our commitment into the future as we proudly continue

to provide the best in high voltage, high current, high power test systems

and components.

High Voltage • High Current • High Power Test Systems and Components

World Headquarters

Phenix Technologies, Inc.

Accident, MD 21520 USA

PHENIX

TECHNOLOGIES

Ph: +1.301.746.8118

Fx: +1.301.895.5570

Info@phenixtech.com

www.phenixtech.com

75 Speicher Drive

BranchOfces

Phenix Systems AG

Riehenstrasse 62A, 4058 Basel, Switzerland

Ph: +41.61.383.2770 • Fx: +41.61.383.2771 Info@phenixsystems.com

Phenix Asia

Zhong Cheng Rd, Sec 1, No 177, 2F, Taipei 11148 Taiwan

Ph: +886.2.2835.9738 • Fx: +886.2.2835.9879 Info@phenixasia.com

C E

ISO 9001

R TIFIED

Atec 6CP User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual