Atec 555B User Manual

1340 Flynn Rd. Camarillo, CA 93012
Phone: (805) 389-9800 Fax: (805) 389-9808
http://www.rifocs.com
RIFOCS Corporation
Fiber Optic Instruments & Components
fiber
TOOLS
1mm indium-gallium-arsenide (InGaAs) photodetector
850nm, 1300nm, 1310nm, and 1550nm N.I.S.T. traceable calibration wavelengths
+3 to -60dBm measurement range
Easy to use—three buttons control all
functions
0.01dB measurement resolution
Relative logarithmic dB and absolute
logarithmic dBm units
Multi-wavelength reference storage—stores and recalls reference power levels for faster, more efficient measurements
Snap-On Connector (SOC) interface adapts to all industry standard fiber optic connectors and other less common types
Long battery life—more than 100 hours of continuous operation
User-selectable auto-shutoff
AC power converter and adapter available for
prolonged or benchtop use
Rugged and splashproof
Key Specifications
Applications
555B
1mm InGaAs Optical Power Meter
Features
Detector type 1mm InGaAs
Calibration wavelengths 850, 1300, 1310,
and 1550nm
Calibration traceability U.S. N.I.S.T.
Power range +3 to -60dBm
Absolute accuracy ±0.25dB
Resolution ±0.01dB
Polarization dependence < 0.1dB
Insertion Loss and Link Loss Testing
The 555B 1mm InGaAs optical power meter is a rugged high quality general purpose instrument suit­able for many fiber optic measurement applications.
Paired with a RIFOCS 250 Series LED source or 260 Series laser source, the 555B optical power meter is ideal for insertion loss testing of multimode and sin­gle-mode fiber optic cables and connectors.The 555B optical power meter can also be used for link loss testing of installed cable plants.
The multi-wavelength reference storage capability of the 555B optical power meter permits convenient insertion and link loss testing at different transmission windows if a 252A/252B dual LED source or 262A dual laser source is used.
Output Power Measurements
The 555B optical power meter simplifies output power measurements of transmitters and other light sources. The four calibration wavelengths, InGaAs photodetector, and wide dynamic range make the 555B optical power meter suitable for measuring the output of both LED and laser based transmitters.
In addition, a broad range of Snap-On Connector (SOC) adapters for both industry standard fiber optic connectors, and many less common types, makes the 555B an indispensible tool for technicians and others working with light-based transmission systems.
fiber
TOOLS
RIFOCS Corporation
Fiber Optic Instruments & Components
1340 Flynn Rd. Camarillo, CA 93012
Phone: (805) 389-9800 Fax: (805) 389-9808
http://www.rifocs.com
555B
1mm InGaAs Optical Power Meter
Specifications
1
Detector type 1mm indium-gallium-arsenide (InGaAs)
Calibration wavelengths 850nm, 1300nm, 1310nm, and 1550nm
Power range +3 to -60dBm
Linearity at 1310nm and 1550nm:
±0.5dB +3dBm to -3dBm ±0.05dB -3dBm to -50dBm ±0.5dB -50dBm to -60dBm
Absolute accuracy ±0.25dB at calibration conditions
Typical wavelength dependence:
820 to 880nm 0.033dB/nm 975 to 985nm 0.02dB/nm 1270 to 1330nm 0.005dB/nm 1500 to 1625nm 0.0024dB/nm
Polarization dependence < 0.1dB
Resolution ±0.01dB
Power requirements Two AA-size 1.5V alkaline batteries provide approx. 100 hours of
continuous operation
Connector interface Snap-On Connector (SOC) interface
Environmental:
Operating temp. -15°C to +55°C Storage temp. -35°C to +70°C Humidity 0 to 95% RH, non-condensing
Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
Weight 250g (8.9 oz)
ISO 9001
Ordering Information
One Snap-On Connector (SOC) adapter is included with the 555B optical power meter. Please specify the desired connector adapter type when ordering using the SOC Adapter Table, below. Additional SOC adapters may also be ordered separately.
Part No. Description
555B 555B optical power meter 90AC AC power converter
DS-HH555B Rev. B
SOC Adapter Table
Part No. Description
1001 Blank 1010 DIN 47256 1020 NTT/FC-PC 1030 AT&T/ST-PC 1038 MIL-T-29504 optical termini 1040 HMS-10 (2.5mm) 1047 Mini-BNC 1050 Diamond HMS-0 (3.5mm) 1057 Stratos 430/Holtek 38000 1062 NTT/SC-PC 1081 Radiall VFO 1086 Diamond HMS-10A (SMA-2.5) 1087 SMA-905/906 10E0 Radiall EC 10E2 Diamond E-2000 10TB Simplex TOSLINK/Spectran J-pin 10TD TR/TX set, duplex TOSLINK/Spectran J-pin 10TR Duplex TOSLINK TX 10TX Duplex TOSLINK TR 10ZP H-P Versalink/Spectran V/Z-pin
Subject to change without notice
1
Within specified ambient environment of +20°C to +25°C.
Loading...