Atec 470-5 User Manual

PORTABLE DC HIPOTS

PHENIX Technologies offers a line of conservatively

designed and ruggedly built portable DC Hipots for use in

testing electrical switchgear, cables, motors, generators, and

protective equipment. DC testing is popular because the

equipment is more compact and lighter in weight than

comparable AC equipment and is also generally less expensive.

The DC Hipots offered by PHENIX Technologies are

suitable for lab or field use and are especially helpful when it is

needed to determine the adequacy of newly installed insulation

or to determine when corrective steps are neces-

sary to return equipment to a safe operating

condition. The results of DC tests will help predict

the useful life of insulation Establishing a consis-

tent maintenance testing program reduces failures

and extends equipment life.

Continuously adjustable output

Negative output, positive ground

Guard circuit for stray leakage current

bypass

Three range voltmeters

Zero start interlock

CONTROL POWER ON switch with

indicator

HV ON/OFF pushbuttons with indicators

External interlock provision

Surge and transient protection

Rugged impact/corosion resistant roto-

molded cases with carrying handles and

cable storage

6-foot input cord (three wire)

20-foot test leads (3) with clips and boots

25-foot interconnect cable (4120-5, 4160-2)

Model 470-5

Model 4160-2

Adjustable overcurrent trip on selected

modelsplease inquire

Grounding stick

Other output voltages

Discharge Stick

Digital meters

Output and return lead lengths can be

specified

*Based on our commitment to continual research and development PHENIX

Technologies reserves the right to update product specifications without notice!

EXPERIENCE...QUALITY...RELIABILITY

40104

Control Panel Layout

VOLTAGE

100

MODEL 4100-5

CAL

100kV

50kV

25kV

CAL

X1K

X100

X10

AC INPUT

EXT.INTLK.

F1 F2 F3

MAIN POWER

OFF

RETURN GND GUARD

WARNING!

DONOT TOUCH OR REMOVE RETURN CABLES

DURINGTESTING. FAILURE TO HEED THIS

WARNINGCAN CAUSE LETHAL SHOCK

PHENIX

TECHNOLOGIES

Accident,Maryland, USA

DC HIPOT TEST SET

RANGE (kV)

100

MULTIPLIER

X100

X10

HIGH VOLTAGE

CAUTION

HIGH VOLTAGE

CURRENT

X1K

VOLTAGECONTROL

ZEROSTART

1314151617

Dimensions/Weights*

MODEL

Dimensions

Weight*

MODEL

Control Module

HV Module

430-5

21” W x 17” D x 14” H (533mm) x (432mm) (355mm) 53 lbs. (24kg)

4120-5

21” W x 17” D x 14” H (533mm) (432mm) (355mm) 33 lbs. (15kg)

17.5” W x 12” D x 22” H (440mm) (305mm) (560mm) 111 lbs. (50kg)

470-5

21” W x 17” D x 14” H (533mm) x (432mm) (355mm) 80 lbs. (36kg)

4160-2

21” W x 17” D x 14” H (535mm) (435mm) (355mm) 33 lbs. (15kg) 18” W x 12.75” D x 28” H (460mm) (325mm) (710mm) 150 lbs. (68kg)

*Note: for 220 VAC, add 10 lbs. (4.5kg) to 470-5, 4100-5, 4120-5 and 4160-2 controls; 4 lbs. (1.8kg) to 430-5.

4100-5

22.5” W x 20 ” D x 16.5”H (572mm) (508mm) (420mm) 106 lbs. (48kg)

1. AC power cord

2. Output lead

3. Return terminal

4. Ground terminal

5. Guard terminal

6. Voltmeter range selector

7. Currentmeter range selector

8. Three-range voltmeter

9. Voltmeter calibration potentiometers

10. Currentmeter calibration potentiometers

11. Four-range currentmeter

12. Output voltage control

13. High Voltage OFF

14. High Voltage ON

15. Backup fuse

16. Main fuse

17. Control power indicator

18. Control power switch

19. Main fuse

20. External interlock

The PHENIX Technologies Product Line

●

AC Dielectric Test Sets

●

Resonant Test Sets

●

DC Hipots and Insulation Test Sets

●

Automatic Insulating Material Testers (Dl49)

●

Liquid Dielectric Test Sets

●

Megohmmeters

●

Vacuum/Oil Interrupter Testers

●

Bucket Truck Testers

●

High-Frequency Cable Aging Test Sets

●

Heat Cycling Test Sets

●

Rubber Goods—Protective Equipment Testers

●

Core Loss Testers

Your local representative is

7/02

●

AC, DC and AC/DC Motor Test Sets

●

Transformer Test Systems

●

Computerized Circuit Breaker Test Sets

●

Computerized Recloser Test Sets

●

DC Power Supplies

●

High Voltage DC Cable Thumpers

●

High Voltage Terminations

●

High Power Column-Type Variable Transformers

●

High Power Thoma-Type Variable Transformers

●

Voltage and Current Stabilizers

116 Industrial Drive

Accident, MD 21520 USA

Tel: 301-746-8118

Fax: 301-895-5570

http://www.phenixtech.com