Wavetek’s 3600D combines previous
experience and future vision in
proven features and expandable
platform. All TIA formats are
covered, including AMPS, NAMPS,
TDMA (IS-54B and IS-136), and
extensive test coverage of CDMA
(IS-95A/98). All these digital formats
are available at PCS frequencies
using a self-contained frequency
extension module (FEX). Japanese
and Korean frequency band
specifications are also covered.
Up to four optional modules can
be simply installed. Using flash
memory and the on-board floppy
disk drive, straightforward field
upgrades can be made. Modules can
be purchased as technology develops
and customers’ needs change, as the
3600D’s easy upgrade path preserves
your investment in equipment,
programs, and training.
performed manually can be included
in an AUTORUN. AUTORUNs can
be helpful for specific phones which
may require unique tests and for
carriers who require specific tests for
phones within the system.
Custom AUTORUNs are supplied
by the carrier or phone manufacturer,
or written to user specification. Each
3600D comes with five AUTORUNs
in memory and additional examples
on a 3.5” diskette. The 3600D stores
five AUTORUN tests internally and
accepts 3.5” diskettes for more.
Large Comprehensive Display
The 3600D’s large LCD screen can
be viewed at up to 45˚ angle, allowing key parameters to be viewed
without squinting or constant adjustment -– ideal for a busy service
bench. Comprehensive displays of
parameters are included on the
summary screens.
Channel, base power level, mobile
power level, and system parameter
set-up readings are always displayed
at the bottom of the screen.
Easy-To-Read
Display
Quick, Repeatable Testing With AUTORUNs
The 3600D’s comprehensive MSDOS based programming capability
means that any test which can be
CDMA Capabilities for
Cellular and PCS
Upgrading the 3600D is easy. With
the new CDMA module, technicians
can perform call processing, transmitter tests, and receiver tests. Builtin AMPS and NAMPS protocols are
standard, while PCS coverage is
provided with an optional FEX
module. Based upon requirements of
IS-95A and J-STD-008, the 3600D’s
extensive call processing capabilities
include registration, authentication,
and softer and hard handoffs.
In the critical area of power
control, closed loop and open loop
power control are supported. Speech
coding can use pre-recorded, loopback, or an optional 8K/13K Vocoder
to check voice quality.
CDMA and
TDMA Formats
The 3600D’s signal generator
provides pilot, sync, paging, and
selectable traffic channels. An
Additive White Gaussian Noise
source with 30 dB troubleshooting
range allows real world receiver
testing. The constellation display
shows the symmetry of the modulator and checks for skew and origin
offset. Residual ρ is better than 0.97
for confidence in receiver testing.
Highly accurate, the transmitter
analyzer provides power measurements of ±0.65 dB +0.003 dB/dB
(below +40 dBm) over temperature.
The high ρ accuracy is ±0.003 is ideal
for phone troubleshooting nonlinearity or amplifier defects.
TDMA Testing, IS-136,
and Voice Codecs
Testing digital phones is simple
and effective with the 3600D.
Authentication, Call Waiting,
SMS, and Calling Number ID
test capabilities allow phone
features to be thoroughly checked. The standard VSELP Codec
allows technicians to check voice
quality end-to-end, while the
new ACELP Voice Codec option
Simple Operation
tests voice quality for IS-136 PCS
phones and preserves loopback
voice tests for VSELP or ACELP.
The 3600D’s large display with
limit lines allows technicians to
check burst envelope to look at
specification compliance, overshoot, and timing problems.
Extensive receiver analysis with
BER, mobile-reported BER, and
MAHO RSSI checks phone
performance.
For comprehensive transmitter
testing, power and frequency
measurements, RMS Vector
Error, and Peak Vector Error are
provided. Magnitude and Phase
Error, Origin Offsets, and Burst
Amplitude droop allow accurate
characterization of the mobile.
The constellation display helps
technicians check in-phase and
quadrature signals for misalignment and permits modulator
troubleshooting.
Productivity
Enhancing Features
Accurate and repeatable
measurement performance
provides confidence in phone
testing. A ‘C’ message filter,
together with 50 Hz to 300 Hz
highpass and 3, 15, and 30 kHz
lowpass filters, provides flexibility
in evaluating new phones.
Remote Control Options
Fast operation using the optional
GPIB remote control ensures
rapid assessment of phones in
factory installed, fully automatic
test systems. Comprehensive
capabilities allow factory QC
systems to be used at repair
depots to check performance. RS232 control is also provided for
PC control in service shops.
Cable Loss Calibrator
Power accuracy via cable connection is enhanced using the
built-in cable calibrator. With this
feature, cables used for automobile installation can be
calibrated and intermittent or
faulty RF cables located.
Soft Keys Give Easy Access
All manual screens have soft keys
to help technicians maneuver
through comprehensive test
screens. Operating an extensive
test or improving response time is
enhanced using the soft keys.
3.5” Floppy
Disk Drive
Automatically Exit And Return
To Manual Operation
During an AUTORUN, the
technician can pause on a failure,
use manual mode to adjust a
particular parameter, and easily
return to the AUTORUN.
Affordable, Easy Custom Programming
To avoid expensive programming
costs, test routines can be simply
customized using a standard MSDOS based text editor and PC.
Up to five AUTORUN routines
can be internally stored, while a
3.5” diskette holds additional
programs. For example,
AUTORUNs can simplify:
• 30-second inspection tests for
verifying general operation
• Custom tests for phone repair
• Intermittent fault finding tests
One Button Access Simplifies Operation
One push of the ID button
provides ESN, MIN and SCM
data to verify correct phone
programming.
Model 3600D
Logical Ease of Use
Large, easy-to-read
display
enhance ease-of-use
HELP key provides
context sensitive
technical assistance
Eight soft keys
Function keys
enhance operations
PC compatible 3.5”
floppy disk drive
Data entry keys identify
test names and provide
numeric functions
QUICK key activates
customized, quick
AUTOTEST function
Two internal generators
provide flexible
‘Audio Out’ signals
Mobile power provides
current, voltage, and
power consumption
Internal calibrator improves
measurement accuracy and
isolates faulty cables
Model 3600D
®
General Specifications
Physical Specifications
Height x Width x Depth: 7” x 19.5” x 16.5”
Weight: 37 lbs.
Temperature Range
Operating: 10° to 40°C
Storage: -20° to 70°C
Power Requirements
Voltage: 85 to 264 VAC
Current: 5A maximum
Frequency: 47 to 440 Hz
External Interfaces
Printer: Centronix, Parallel
Control: RS-232
GPIB: IEEE Standard 488