Atec 3142C User Manual

Features:

●

26 MHz - 3 GHz Frequency Range

●

Emissions Testing:

-- ANSI C63.4

-- FCC-15 and FCC-18

-- EN 55022

●

Individually Calibrated:

-- 1m per SAE ARP 958

-- 3m and 10m per ANSI C63.5

●

Avg. 2:1 VSWR Above 80 MHz

●

Fits Compact Chambers

●

Tough Powder Coat Finish

EMC Antennas

BiConiLog

Model 3142C

TM

●

Two Year Warranty

ETS-Lindgren’s EMCO Model 3142C
BiConiLog is a hybrid antenna that

combines innovative design, compact
size, and excellent performance. This
antenna enables users to measure a
frequency range of 26 MHz to 3.0 GHz
in one sweep, negating the need for
multi p l e antenn as and time-consuming
equipment setup. This single sweep
capability removes the need for multiple
antennas and addition al equipment,
which improves accuracy and saves time
and money.

This BiConiLog is designed as a dual­purpose antenna that can be used for
both immunity and emissi o n t e s ting.
From 26 MHz to 60 MHz, the Model
3142C antenna with optional end plates
exhibits an average 5.5 dB gain
improvement vs. typical hybrid
antennas. At some frequencies, a 10 dB
gain improvement is achiev ed.

ETS-Lindgren’s EMCO Model 3142C BiConiLog Antenna

This model replaces the EMCO Model
3142 and 3142B, and when used with
opti o nal end plates, is identical to the
former Model 3141. The optional end
plates are available to improve gain for
immunity testing. These plates can
easily be attached and detached by hand
using screw knobs. Individual antenna
calibration data- without the end plates
attached- is provided for emission
testing.

Standard Configuration

●

Antenna

●

Individually calibrated:

-- 1m per SAE ARP 958

-- 3m and 10 m per ANSI C63.5

●

Actual antenna factors and a signed
Certificate of Calibration Conformance
included in manual

●

Manual

Options

●

Optional T Bow-Tie end plates (shown below)

●

ETS-Lindgren offers several non-metallic,
non-reflective tripods for use at EMC test
sites. For easy horizontal and vertical
polarization changes, the Model 7-TR tripod
is recommended

ETS-Lindgren’s EMCO Model 3142C BiConiLog

Antenna with Optional End Plates

EMC A n t ennas

BiConiLog

Model 3142C Antenna Factor (without End Plates) Model 3142C Forward Power 1m with End Plates

Model 3142C

Model 3142C Forward Power 3m with End Plates

Model 3142C Gain with End Plates

USA:

Tel [phone]
Fax [phone]

Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications. 7/03 - 1.5K S © 2003 ETS-Lindgren REV A

FINLAND: FRANCE:

Tel [phone]
Fax [phone]

Tel [phone]
Fax [phone]

Tel [phone]
Fax [phone]

CHINA:

Tel [phone]
Fax [phone]

JAPAN:

Tel [phone]
Fax [phone]

ONLINE:UK:

[e-mail]
www.ets-lindgren.com