Atec 115ASX-T User Manual

Models 115ASX-115ASXT

1,500VA

15-1,200 Hz

1Ø – High Performance AC Power Source

1Ø 0-132V

L-N

Standard Features:

• Single phase output from front panel or bus command.

• 15 to 1,200 Hz. Operation – 5,000 Hz small signal bandwidth.

• Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged.

• True-RMS metering of volts, amps, and power.

• GPIB (IEEE-488.2) or RS-232 Interface.

• Waveform Library – Arbitrary Waveform Generator.

• 99 stored programs with associated transients for static and dynamic test applications.

• UPC Studio Software Suite.

• UPC Interactive LabVIEWTM Libraries.

Available Options:

• T versions include internal transformers for higher voltage ranges

• Rack enclosures with caster base

• Programmable Output Impedance

• Harmonic Analysis and Waveform Synthesis

• Peak Inrush Capture and Waveform Analysis

• UPC Test Manager Software Application

UPC Manager Software Suite

Master the Power of the Wave!

UPC Manager Software gives you the tools necessary to quickly and easily operate your AC Power Source. With our graphical interface control all areas of your AC Power Source testing with simple presets, user prompts, test sequences, test plans and custom reports.

Model 115ASX

As a member of Paci c's ASX-Series family of high performance AC Power Sources, the 115ASX o ers the low acoustic noise, ease of installation, and maximum power density found in all of Paci c's high frequency, pulse width modulated AC Power Sources. Control and operational features provide a high degree of versatility and ease for applications ranging from simple, manually controlled frequency conversion to harmonic testing and sophisticated bus programmable transient simulation.

AC TEST POWER

The 115ASX is equipped with a powerful micro-controller with the ability to operate as a fully integrated test system. It supplies a variety of power conditions and transients to the device under test while metering and analyzing all output performance parameters.

FREQUENCY/ VOLTAGE CONVERSION

The 115ASX is an excellent source of stable AC Voltage over the frequency range of 15 to 1,200 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 132VL-L are available on the 115ASX model and up to 330VL-L on the 115ASXT model.

UPC SERIES CONTROLLER

Three controller models are available o ering both manual and programmable control. All controllers provide manual operation from the front panel. Programmable Controllers may be operated from the front panel or from a remote interface via RS 232 or GPIB.

The Leader in AC Power Technology

An early pioneer in the development solid-state power conversion equipment, Paci c Power Source continues to develop, manufacture, and market both linear and high-performance PWM AC Power Sources. Paci c's reputation as a market and technology leader is best demonstrated by its continuing investments in both research and development and world-wide customer support. With corporate owned o ces in the United States, France, the United Kingdom, and China, local personalized support is always available.

THE POWER OF EXPERTISE

FREQUENCY CONVERSION R & D MANUFACTURINGAEROSPACE MILITARY CUSTOM

Output Ratings

115ASX

115 ASXT

115ASX

Rated Power (VA)

1500

115 ASXT

Rated Power (VA)

1500 Direct

Coupling Mode

Direct 1Ø

Coupling Mode

Form

1Ø

Output Voltage

rms

(L-N/L-L)

Output Voltage

rms

(L-N/L-L)

Max

132 16 15-1200

Max

132

Current

rms

Current

rms

)

Frequency

Range

Frequency

Range

15-1200

Input

Power

1Ø

Input

Power

1Ø

115ASX-115ASXT

Unit Height

In/mm/U

5.25/133/3U

Unit Height

In/mm/U

5.25/133/3U

Unit Weight

(Lbs/Kg)

70/32

Unit Weight

(Lbs/Kg)

95/43

Transformer 1.5:1

Transformer 2.0:1

Transformer 2.5:1

NOTES:

1. Rated output power is based on a combination of nominal output voltage, rated current and load power factor. Values stated represent the maximum capabilities of a given model. Consult factory for assistance in determining speci c unit capabilities as they might apply to your application.

2. Vmax is output voltage with nominal input and full rated load applied.

3. Available current will vary with output voltage and power factor.

1Ø

ASX Power Source Speci cations (PF = 1.0, V

Output

Frequency

Full Power

15-1,200Hz Direct Coupled

45-1,200 Hz Transformer

Coupled

Line Regulation

0.1% max for a ±10% line

change

198

264

330

> 25% F.S.)

out

Load Regulation (Direct coupled)

0.25% 15 to 400 Hz.,

0.50% 400 to 1,200 Hz.

2 to 5% depending on ratio

Improves to <0.1% with external sense and CSC

10.7

6.4

enabled .

45-1200

Output Distortion

0.25% THD

1.25% THD

AVG

15 to 200 Hz

200 to 1,200 Hz

Ripple and Noise

-66dB

Response Time

60 msec typ.

10-90% load step

Input Power Requirements (47-63 Hz)

Input Voltage

Input Current

Recommended

Unit Service

100VAC

±10%

rms

25A 25A

110VAC

±10%

rms

120VAC

±10%

rms

25A

200VAC

±10%

15A

208VAC

±10%

rms

15A

220VAC

±10%

15A 15A

230VAC

±10%

rms

240VAC

±10%

rms

15A

* Power Source equipped with soft start feature. In-rush current at application of input power will not exceed recommended input service.

Power Factor Rating Curves

Rated Continuous load current as a function of Power Factor and Output Voltage-Nominal Input Line

Single Phase Mode

OUTPUT VOLTAGE-AC VOLTS RMS

Short term overloads to 20A are permitted. Operating time before thermal shutdown or circuit breaker trip varies from seconds to several minutes depending upon line and temperature conditions.

+ 2 hidden pages