
Portable
Air Tank
Operating Instructions & Parts Manual
Model
ATD9895
ATD9890
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
Capacity
5 gallon
10 gallon
WARNING
!
• This product contains lead, a chemical known
in the State of California to cause cancer, birth
defects and other reproductive harm.
• Wash hands after each use.
ATD Tools Inc.
Visit us at www.atdtools.com
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Printed in China
ATD9890-M0 _022014

SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
portable air tank before using. The owner and operator of this equipment shall have an understanding of this portable
air tank and safe operating procedures before attempting to use. The owner and operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this product is authorized. If any doubt exists as to the
safe and proper use of this portable air tank, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. (Including warning label).
Any portable air tank that appears damaged in any way, is missing parts, or operates abnormally shall be removed
from service immediately. If the portable air tank has been dropped, impacted suddenly, or dented, immediately
discontinue use until product has been checked by an authorized service center (contact distributor or manufacturer
for a list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and operator’s manuals are availalbe from the manufacturer.
PRODUCT DESCRIPTION
ATD Tools Portable Air Tanks are designed to contain air pressure up to 125 psi. These portable air tanks are
.
The air contained within this tank can not be made breathable! NEVER rely on this portable air tank as a
!
source of breathable air.
This portable air tank should only be used for the intended use of portable air. Never use past the discard
!
date on the bottom of the tank. This tank is NOT designed to meet the requirements of ASME or OSHA
1915.172. Check your state and municipal regulatory requirements before using.
PREPARATION
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Customer Support @ (888)-332-6419.
2. Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product,
its components and recognize the hazards associated with its use.
3. Replace worn or damaged parts and assemblies with Authorized Replacement Parts only. (See Replacement
Parts Section).
Manifold
Air Pressure Gauge
Air Hose
Reservoir
Air Chuck
Air Valve Knob
Air Inlet
Figure 1 - Typical Air Tank Nomenclature
2

! WARNING
• Read, understand and follow all printed materials
provided with and on this device before use.
• RISK OF BURSTING - Do not exceed rated
pressure of 125 psi.
• Fill only from low pressure compressor systems
whose pressure is no greater that 150 psi. Fill
only with filtered and dried shop air.
• Do not adjust or tamper with factory preset
pressure relief valve.
• Do not operate air tank with damaged or missing
parts.
Replace components with factory authorized
parts only.
.
• Do not attempt to weld or repair a damaged
tank.
•
Replace tank
otherwise damaged in any way.
•
Always wear safety goggles when handling or
using this equipment.
•
Store indoors, do not expose to moisture and/or
direct sunlight.
• RISK OF INJECTION - Attachments are NOT
recommended for use with this air tank.
Never direct stream of air at person(s). Always
wear safety goggles.
• RISK OF FIRE OR EXPLOSION
store or disperse
liquids, gasses or materials of any kind.
•
Never use this portable air tank past the discard
date stamped into the bottom of the tank.
Failure to heed these markings may result in
personal injury and/or property damage
if it is dented, cracked, rusted or
Do not use to
-
MAINTENANCE
Periodically inspect the air tank. Ensure that all parts
move freely. Inspect the air hose for cracking and abrasions.Inspect tank for dents, craks, and rust.
Do not attempt to weld or repair a damaged tank.
Replace damaged components ONLY!
(See Replacement Parts section below)
Cleaning
Clean as needed and wipe with a dry cloth.
Storage
When not in use, shut off the air valve by turning the
red knob clockwise. Store indoors, do not expose to
moisture or heat radiation.
REPLACEMENT PARTS
Not all components of the air tank are replacement
items, but are illustrated as a convenient reference of
location and position in the assembly sequence. When
ordering parts, give model number, serial number and
description below. Call or write for current pricing:
ATD Tools Inc., Tel:(888) 332-6419 Fax:(816) 448-1999
Part No. Description Qty
ATD9892
ATD9893
ATD9894
Gauge
Manifold
Hose Assy
1
1
1
OPERATION
Filling Air Tank: (ref. Fig 1 on page 2)
1. Fill the air tank by connecting an air source to the air
tank manifold. Monitor air pressure gauge movement.
Do not exceed rated air pressure of 125 psi.
2. Open the air valve by turning the knob counter-
clockwise, pressurizing the air hose. Your air tank is
now ready for use.
3
Gauge
Air Hose
Figure 2 - Air Tank Replacement Parts
Manifold

1 YEAR LIMITED WARRANTY
For a period of one (1) year from the date of purchase, ATD Tools Inc. will repair or replace, at its option,
without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This
limited warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product to
the original dealer it was purchased from with the original proof of purchase.
CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS DESCRIBED ABOVE. (2) ATD Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO ONE YEAR. OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,
AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,
ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND
IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation
have other rights which vary from state to state.
of incidental or consequential damages, so the
4