Owner's Manual
Portable Air Tank
Model
ATD-9895
ATD-9890
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
Capacity
5 gallon
10 gallon
! ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
Atd Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
•
This portable air tank does not meet the
safety & performance guidelines of the ASME
Pressure Vessel Code. Never use past the dis-
card date stamped into the bottom of tank.
! WARNING
Printed in China
ATD9890, 9895OM 05/12
SAFETY and GENERAL INFORMATION
Save these instructions. siht no dna htiw dedivorp noitamrofni eht wollof dna ,dnatsrednu ,daer ,ytefas ruoy roF
portable air tank before using. The owner and operator of this equipment shall have an understanding of this portable
air tank and safe operating procedures before attempting to use. The owner and operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this product is authorized. If any doubt exists as to the
safe and proper use of this portable air tank, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any portable air tank
that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the portable
air tank has been dropped or impacted suddenly, unexpectedly, immediately discontinue use until product has been
checked by a factory authorized service center (contact distributor or manufacturer for list of authorized service
centers). It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals
are available from manufacturer.
PRODUCT DESCRIPTION
Atd Tools Portable Air Tanks are designed to contain air pressure up to 125 psi.
These portable air tanks are designed for one purpose: to supply compressed air for use in inflating tires,
sport balls, inflatables.
Check with your inflatable product’s owner’s manual for proper inflation pressures.
This air contained within this tank can not be made breathable! NEVER rely on this portable air tank as a
!
source of breathable air.
RISK OF BURSTING - This portable air tank does not meet the safety & performance guidelines of the
!
ASME Pressure Vessel Code. NEVER use past the discard date stamped into the bottom of tank.
Do not exceed rated pressure of 125 psi. Fill only from low pressure compressor systems whose pressure is
no greater than 150 psi.
PREPARATION
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Atd Tools Technical Service
(636)272-9050.
2. Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product,
its components and recognize the hazards associated with its use.
3.Replace worn or damaged parts and assemblies with Authorized Replacement Parts only. (See Replacement
Parts Section).
Manifold
Air Pressure Gauge
Air Hose
Reservoir
Air Chuck
Figure 1 - Typical Air Tank Nomenclature
Air Valve Knob
Air Inlet
2
! WARNING
.
Read, understand and follow all printed materials
provided with and on this device before use.
.
RISK OF BURSTING - Do not exceed rated pressure of 125 psi.
.
Fill only from low pressure compressor systems
whose pressure is no greater that 150 psi.
.
Do not adjust or tamper with factory preset
pressure relief valve.
.
Do not operate air tank with damaged or missing
parts.
.
Replace components with factory authorized parts
only.
.
Do not attempt to weld or repair a damaged tank.
.
Replace tank if it is dented, cracked, rusted or
otherwise damaged in any way.
.
Always wear safety goggles when handling or
using this equipment.
.
Store indoors, do not expose to moisture and/or
direct sunlight.
.
RISK OF INJECTION - Use only those attachments recommended by manufacturer. Never direct
stream of air at person(s). Always wear safety
goggles.
.
RISK OF FIRE OR EXPLOSION - Do not use to
store or disperse combustible/flammable liquids,
gasses or materials of any kind. Fill only with
filtered and dried shop air.
.
This portable air tank does not meet the safety &
performance guidelines of the ASME Pressure
Vessel Code. Never use past the discard date
stamped into the bottom of tank.
.
Failure to heed these markings may result in personal injury and/or property damage.
MAINTENANCE
Periodically inspect the air tank. Ensure that all parts
move freely. Inspect the air hose for cracking and
abrasions.
Cleaning
Periodically inspect the air tank for signs
of rust or corrosion. If any rust spots are found, sand
the affected area and cover
with a suitable utility paint. Clean as needed and
wipe with a dry cloth.
Storage
When not in use, shut off the air valve by turning the
red knob clockwise. Store indoors, do not expose to
moisture or heat radiation.
REPLACEMENT PARTS
Not all components of the air tank are replacement
items, but are illustrated as a convenient reference of
location and position in the assembly sequence. When
ordering parts, give model number, serial number and
description below.
Description Qty.
Manifold 1
Hose Assy 1
Gauge 1
Label 1
Owners Manual 1
Manifold
Gauge
WARNING
!
!
• The paint on this product contains lead, a
chemical known in the State of California to cause
cancer, birth defects and other reproductive harm.
• Do not ingest paint chips and keep product
away from children.
• Wash hands after each use.
Air Hose
Figure 2 - Illustration for replacement parts
3
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, Atd Tools Inc. will repair or replace, at its option, without charge,
any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied
warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by contacting your point of sale and obtaining return
or repair information from your supplier.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) the CONSUMER'S
SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS
DESCRIBED ABOVE, and (2) Atd Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDEN-
TAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply
to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Atd Tools Inc.
160 Enterprise Drive,
Wentzville MO 63385
636-327-9050
4
Loading...