ATD Tools ATD-8525 User Manual

ATD-8525

20 GALLON PARTS WASHER INSTRUCTION

MANUAL

IMPORTANT SAFETY INSTRUCTIONS

1. Read all instructions before using this unit.

2. Care must be taken as burns can occur from touching hot parts.

3. Do not operate the equipment with a damaged cord or if the equipment
has been dropped or damaged. Return the equipment to our service
center for examination or mechanical adjustments or repair.

4. Do not let cord hang over edge of table, bench or counter or come in
contact with hot manifolds or moving fan blades.

5. If an extension cord is necessary, a cord with a current rating equal to or
more than that of the equipment should be used. Cords rated for less
current than the equipment may overheat. Care should be taken to
arrange the cord so that it will not be tripped over or pulled.

6. Always unplug equipment from electrical outlet when not in use. Never use
the cord to pull the plug from the outlet. Grasp plug and pull to disconnect.

7. Let equipment cool completely before putting away. Loop cord loosely
around equipment when storing.

8. To reduce the risk of fire, do not operate equipment in the vicinity of open
containers of flammable liquids (gasoline).

9. Adequate ventilation should be provided when working on operating
internal combustion engines.

10. Keep hair, loose clothing, fingers and all parts of body away from working
parts.

11. To reduce the risk of electric shock, do not use on wet surfaces or expose
to rain.

12. Use the equipment only as described in this manual. Use only
manufacturer’s recommended attachments.

13. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have
impact resistant lenses, the y are NOT safety glasses.

14. USE AQUEOUS BASED SOLVENTS THAT ARE RECOMMENDED FOR

THIS PARTS WASHER ONLY

15. WARNING: Do not fill parts washer above the top fluid level mark.

SAVE THESE INSTRUCTIONS