Pneumatic Creeper
Seat w/Drawers
Operating Instructions & Parts Manual
Model
ATD81048
Capacity
300 lbs.
U.S. Patent No. D617,999
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
ATD Tools Inc.
160 Enterprise Drive, Wentzville MO 63385
! WARNING
To avoid pinch and laceration injuries:
•
Keep hands away from pinch and laceration
hazards points that are created during use!
•
Be alert and sober when using this product!
•
Sit centrally on seat pad ONLY. NEVER sit on
edge!
Printed in China
ATD81048-M0 rev 11/11
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator shall have an understanding of safe use/operating procedures
before attempting to use. The owner and/or operator shall be aware that the use of this product may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language before
use of this device is authorized. If any doubt exists as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
Pneumatic Chair that appears damaged in any way, operates abnormally or is missing parts, shall be removed
from service immediately and the manufacturer notied. If you suspect that this product was subjected to a shock
load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a
factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is
recommended that an annual inspection be done by qualied personnel. Labels and owner’s manuals are available
from manufacturer (see Replacement Parts, page 4).
PRODUCT DESCRIPTION
This device is designed to support and transport, along a smooth and level surface, one person, tools, and equipment
weighing 300 lbs. or less for the purpose of performing automotive maintenance or service. This device is not
intended, designed or engineered to be used for any other purpose.
Do not use this device for any purpose other than that for which it is expressly intended.
!
SPECIFICATIONS
Model Rated Capacity Minimum Height Maximum Height
ATD81048 300 lbs 17-1/8"
tool drawers
21-3/8"
seat
tool drawer
cylinder
caster
Figure 1 - Model ATD81048 Nomenclature
2
! WARNING
• Read, understand, and follow all printed materials provided with and on this product before use.
• Do not exceed rated capacity of 300 lbs. Rated capacity consists of: the user, tools, and equipment.
• Use on smooth, level, seamless surfaces only.
• Sit down gently. Avoid shock loads caused by jumping or falling onto seat.
• Components on this chair may present a pinch hazard. Exercise caution when opening/closing drawers.
• Do not stand on this product.
• Keep out of the reach of children. This device is not appropriate for children’s use.
Before beginning assembly of product, make sure all parts are present. If any part is missing or damaged, do not
attempt to assemble, install or use the product. Contact ATD Customer Service for replacement parts.
ASSEMBLY AND OPERATION INSTRUCTIONS (ref. Figure 2)
1. Insert Cylinder into hole of Base Tool Tray Assembly.
2. Place Seat on top of assembled Base Tool Tray/Cylinder.
3. Understand and follow all warning information. The Pneumatic Chair is NOT suitable for storing ammable,
combustible, or corrosive materials.
Keep hands away from pinch and laceration hazards points that are created during use! Be alert
!
and sober when using this product! Sit centrally on seat pad ONLY. NEVER sit on edge!
MAINTENANCE
Wipe clean as needed. Use mild upholstery cleaner (not caustic) to clean seat if needed.
DO NOT lubricate casters!
!
REPLACEMENT PARTS
Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the creeper are
replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
When ordering parts, give model number, part number and description. Call or write for current pricing:
ATD Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel:(636)327-9050 Fax:(636)327-9046
Replacement Parts List
Item Part No. Description Qty
1 81048-A-ATD Seat Cushion 1
2 81048-B Cylinder 1
3 81048-C Casters 4
1
2
Figure 2 - Model ATD81048 Replacement Parts
3
3
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without
charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any
implied warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight
prepaid, to ATD Tools Inc. Warranty Service Department, 160 Enterprise Drive, Wentzville, MO 63385.
Except where such limitations and exclusions are specically prohibited by applicable law, (1) the CONSUMER'S
SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS
DESCRIBED ABOVE, and (2) ATD Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDEN-
TAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply
to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have
other rights which vary from state to state.
ATD Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
Tel: (636)327-9050 Fax: (636)327-9046 www.atdtools.com
4
Loading...