ATD Tools Atd-7489 User Manual

Engine Sling

Operating Instructions & Parts Manual

Model Number

Atd-7489

Capacity

1250 lb.

Atd Tools Inc.

160 Enterprise Drive, Wentzville MO 63385

Printed in China

ATD7489-M0 rev 03/06

Save these instructions. For your safety, read, understand and follow the information contained within. The owner
and operator shall have an understanding of this equipment and safe operating procedures before attempting to use.
Instructions and Safety information shall be conveyed in the operators native language before use of this equipment is
authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and
misuse of the equipment. If any doubt exists as to the safe and proper use of this equipment, remove from service
immediately. Inspect before each use. Do not use if there are broken, bent, cracked or otherwise damaged parts
(including labels). Owners and operators of this equipment shall be aware that the use of this equipment may require
special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that
any missing or damaged decals, warning / safety labels or signs be replaced with factory authorized replacements
only. Any engine sling that appears to be damaged in any way, is worn or operates abnormally shall be removed
from service and destroyed immediately.

PRODUCT DESCRIPTION

Atd Tools Engine Sling is designed to use with standard engine crane to safely support load up to 1250lb. It assists
the removal and installation of engine easily by mouting four bolt-thru bracket to the engine. Heavy duty steel frame
helps prevent distortion and twisting. Compliance with factory standards ensure safety, strength and stability.

SPECIFICATIONS

Model Capacity

Atd-7489 1250 lb. 10" ~ 12 1/2" 12" 18" x 7 5/8" 12.2 lb.

Hanging Chain

Threaded Tilting Rod

Sling Bar

Chain Bracket

Distance

Tilt adjustment Screw

Chain with Bracket

Chain Length

Frame Size

(L x W)

Net Weight

BEFORE USE

1. Verify that the equipment and the application are
compatible.

2. Before using this equipment, read the operator's
manual completely and familiarize yourself thoroughly
with the equipment and the hazards associated with
its improper use.

3. Inspect before each use. Do not use if bent, broken
or cracked components are noted.

4. Ensure that all parts move freely.

! WARNING

• Study, understand, and follow all instructions
provided before attempting to use this equipment

• Do not exceed rated capacity.

• Never work under a lifted load for any reason.

• Ensure that the engine is supported securely
before repairing.

• Do not use this equipment for any purpose other
than that for which it is intended.

• No alterations shall be made to this product.

• Failure to heed these markings may result in
personal injury and/or property damage.

.

Figure 1 - Engine Sling Components

2

OPERATION

1. There are three positions available to adjust the chain
bracket width to fit most engine. Adjust to your best
fit and ensure that the threaded pin is tighten.

2. Secure engine to the chain brackets

3. Engage the Engine Sling hanging chain to the engine
crane hook.

4. Ensure the load is centered.

5. Follow vehicle service manual recommendations to
remove engine.

6. Study and follow engine crane's operator instructions
manual to remove/install engine.

7. When ready to remove engine, lift the engine crane
gradually. Balance the engine at proper angle by
turning the tilt adjustment screw.

8. Lift the engine crane high enough to clear the vehicle.

9. Immediately upon removal and when clear of the
vehicle, lower the load to lowest practical position.

Note: Avoid rolling the loaded engine crane. To help,
position an engine stand if necessary, move only across
smooth, level, seamless surfaces.

! WARNING

To avoid crushing and
related injuries:
NEVER work under a
loaded engine sling or
engine crane.

MAINTENANCE

Periodically inspect the Engine Sling. Ensure all parts
move freely. To help prevent rust, wipe clean after each
use. If rust appears, sand affected area and cover with
suitable utility paint. Store the Engine Sling in a clean,
dry area.

10. Before moving, ensure the load:
a. is lowered to lowest practical position and below

center of gravity.

b. is prevented from swinging and inadvertent shifting.

11.Position a suitable engine stand near the removed
engine, then immediately transfer the load to engine
stand.

12.Check to ensure stand is secure before working on
or around.

Replacement Parts List

Item Part# Description Qty

1 T580-03000-000 Hanging Chain 1
2 T580-01000-000 Chain Group 2
3 T580-01001-000 Threaded Pin 2
4 ATD7489-L0 Label 1
5 ATD7489-M0 Manual 1

REPLACEMENT PARTS

Not all components of the Engine Sling are replacement
items, but are illustrated as a convenient reference of
parts location. When ordering parts, give part number
and parts description. Call or write for current pricing:
Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO

63385. Tel:[phone] Fax:[phone]

1

3

2

Figure 2 - Engine Sling Parts Illustration

3

Atd7489-M0

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without
charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited
warranty is a consumer's exclusive remedy.

Performance of any obligation under this warranty may be obtained by returning the warranted product,
freight prepaid, to ATD Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentzville, MO 63385.

Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE
CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS DESCRIBED ABOVE. (2) ATD Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,
AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,
ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND
IS NOT COVERED BY THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.

Atd Tools Inc.

160 Enterprise Drive,

Wentzville MO 63385

636-327-9050

4

PRODUCT SPECIFICATIONS

MODEL #: ATD7489
DESCRIPTION: ENGINE SLING
CAPACITY: 1250 LB.

CHAIN LENGTH: 12"

NET WEIGHT : 12.1 LB.

MEASUREMENT:
A: 18"
B: 14 1/2"
C: 7 5/8"
D: 1/2"
E: 12 1/2"
F: 10"

D

F
E

B

C

A

REV 04/06