ATD Tools ATD-7229 User Manual

Tire Cart
Operating Instructions & Parts Manual
Model Number
Atd-7229
Capacity
300 lbs.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador
antes del uso.
Atd Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
OIPM#7229-0411
Printed in China
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator of this equipment shall have an understanding of this equipment and safe operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this product is authorized. If any doubt exists as to the safe and proper use of this wheel dolly, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any tire cart that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately and the manufacturer notied. If you suspect that the product was subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). Replace worn or damaged parts with Factory Authorized Replacement Parts only. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
The Atd Tools Tire Cart is designed to facilitate the removal, transportation and installation of a single pneumatic tire/wheel assembly as found on many trucks, buses and trailers. This is NOT suitable for use as a wheel and tire puller. It is designed ONLY for use in removing up to rated capacity tire and wheel assemblies which are not bound and/or seized up at the brake drum or hub assemblies.
NEVER load this device with more than the weight of the tire to be moved!
!
SPECIFICATIONS
Model Capacity Roller Spread Overall Size (L x W x H)
ATD7229 300 lbs. 19-1/2" 50" x 27-1/2" x 20"
WARNING
!
To avoid crushing and related injuries and or property damage:
Read, understand and follow all printed materials provided with and on this product.
• Do not exceed rated capacity.
• Use only on hard, level surfaces capable of sustaining the load.
Always use both hands to control tire and Tire Cart.
• Move slowly and maintain tire in as close to vertical position as possible.
• No alterations shall be made to this product.
• Failure to heed these markings may result in personal injury and/or property damage.
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Atd Tools Technical Service line (636)327-
9050. Read the owner's manual completely and familiarize yourself thoroughly with this product, its components, and recognize the hazards associated with its use.
2. Assemble the Tire Cart as shown in Figure 2.
3. Check to ensure the Tire Cart wheels roll freely and smoothly before putting into service. Replace worn or damaged parts with Factory Authorized Replacement Parts only. Contact the manufacturer or distributor of this product for a list of factory authorized service centers.
2
OPERATION
1
6
6
4
3
2
5
Follow the vehicle manufacturers recommended removal and installation procedures for tire, wheel or hub.
!
After the tire/wheel assembly has been loosened from the hub or axle and is ready to be removed, position the tire cart under the tire to be removed. Adjust cart position such that the tire/wheel assembly will balance between roll-
ers without falling.
Loading the Tire Cart
NEVER load this device beyond rated capacity!
!
NEVER use the Tire Cart as a wheel pulling device. Before transporting wheel assembly, ensure that it is free from the
!
hub or drum assembly and balanced between the rollers.
When the weight of the loosened tire and wheel assembly is supported by the Tire Cart, carefully roll the cart away from the drum or axle.
Always use both hands to control tire and Tire Cart!
!
Transporting the Loaded Tire Cart
1. Ensure that tire is properly placed on the rollers.
2. When wheel assembly has cleared the hub or the axle, push or
pull to desired location. Walk slowly, exercize caution and look ahead to avoid obstacles while using both hands to control the tire and the tire cart.
Figure 1 - Always use both hands
REPLACEMENT PARTS
Not all components of this Tire Cart are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, parts number and parts descrip­tion. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel:(636)327-9050 Fax:(636)327-9046
Item Part No. Description Qty
1 92030-1 Handle Assembly 1
2 92030-2 Roller Assembly 2
3 92030-3 L Roller Frame 1
4 92030-4 R Roller Frame 1
5 92030-5 Wheel Assembly 2
6 92030-6 Frame Hardware Kit 1
3
Figure 2 - Parts Illustration for Tire Cart
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, Atd Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to Atd Tools Inc. Warranty Service Department, 160 Enterprise Drive, Wentzville, MO 63385.
Except where such limitations and exclusions are specically prohibited by applicable law, (1) the CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE, and (2) Atd Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDEN- TAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
Atd Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385
Tel: (636)327-9050 Fax: (636)327-9046 www.atdtools.com
4
Loading...