ATD Tools ATD-10536 User Manual

ATD-10536

8.1 AMP Variable Speed Reciprocating Saw
Owner’s Manual

TECHNICAL SPECIFICATIONS

Voltage: 120V

Frequency: 60Hz

Rated Power: 8.1 Amps

No load speed: 600-2900 SPM

Manufactured in China

To ATD Tools, Inc. Specifications

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS:

• To reduce the risk of fire, electric shock, and personal injury, always READ AND FOLLOW all instructions before operating this product.

• Save this manual. You will need this manual for the safety warnings, precautions, assembly instructions, operating and maintenance procedures,

parts list and diagrams.

• The gear housing, intermediate plate, blade and pivoting guide shoe are likely electric conductors if the blade cuts into live wiring within a wall.

• Use the ATD-10536 for only the jobs that is intended to do. Use for any application beyond its designed operation could cause property damage,

personal injury or even death.

1) KEEP WORK AREA CLEAN - Cluttered areas and benches invite injuries.

2) CONSIDER THE WORK ENVIRONMEN T - Do not expose the tool to rain and do not use power tools in damp or wet locations. Keep work
area well lit. Do not use power tools where there is risk of fire or explosion.

3) GUARD AGAINST ELECTRIC SHOCK - Avoid body contact with earth or ground surface (e. g .pipes, radiators ranges, refrigerators, etc.).

4) KEEP CHILDREN AWAY - Do not let onlookers touch the tool or extension cord. All onlookers should be kept away from work area.

5) STORE IDLE TOOLS - When not in use, tools should be stored in a dry place, high or locked up and out of the reach of children.

6) DO NOT FORCE THE TOOL - It will do the job better and safer at the rate for which it was intended. Any forcing of the tool could result in
property damage, personal injury or even death.

7) USE THE RIGHT TOOL - Do not force small tools or attachments to do the job of a heavy duty tools. Do not use tools for purposes that they
weren’t intended for. Doing so could result in property damage, personal injury or even death.

8) DRESS PROPERLY - Do not wear loose clothing or jewelry, as they can be caught in moving parts. Rubber gloves and non-skid footwear
are recommended when working outdoors. Contain long hair to keep it from any moving parts.

9) USE PROTECTION - Use safety glasses and hearing protection at all times and a face or dust mask if the cutting operation is dusty.

10) DO NOT ABUSE THE CORD - Never carry the tool by the cord or yank it to disconnect it from the electrical socket. Keep the cord away
from heat, oil and sharp edges.

11) SECURE YOUR WORK - Use clamps or vise to hold your work .It is safer than using your hands and it frees both hands to operate the tool.

12) DO NOT OVERREACH - Keep proper footing and balance at all times.

13) MAINTAIN TOOL WITH CARE - Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and
changing accessories. Inspect cord periodically and if damaged, have it repaired by a qualified service person. Inspect extension cords
periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.