Atdec VF-WD Technical specs

VF-WD

Technical Specifications

A

Component Checklist

Notes

Maximum Load: 8kgs (17.5lbs)

Display Compatibility: Visidec Focus Wall Direct is compatible with most LCD flat panel displays up to 24” (61cm) that
feature either 75 x 75mm or 100 x 100mm VESA mounting hole patterns.

Mounting Options: Visidec Focus Wall Direct can be mounted directly onto timber stud or masonry walls.

Included Hardware: All fasteners and mounting hardware is included.

Tools Required: Power drill, 5.5mm (1/4”) drill bit, 8mm (5/16”) masonry drill bit, Phillips Head screwdriver.

Colours: Black/Polished Silver. Warranty: 10 years limited

B

Component Checklist

Technical Information

90mm
(3.50”)

VESA Mounting Plate
in 75x75mm position

Ø6.5

TILT

Maximum: ±70°

With typical 24” display attached: ±29.5°

PAN

Maximum: ±45°

With typical 24” display attached: ±13°

Portrait/Landscape

Maximum: 95°

58mm
(2.25”)

75mm

100mm

No por tion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pt y Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 08.04.11 ©

100mm75mm

93.5mm
(3.75”)

VESA Mounting Plate

in 100 x100mm position