Page 1
A General Features
vf-at-d / focus articulated arm
double
Technical Specifications
Maximum Load:
8kg (17.5lbs) per display.
Display Compatibility:
Visidec Focus Articulated Arm Double is compatible with most
Flat Panel Displays between 12” and 24” (30cm and 61cm)
that feature either 75mm x 75mm or 100mm x 100mm
VESA mounting hole patterns.
Mounting Options:
Visidec Focus Articulated Arm Double includes Bolt Through
and Desk Clamp mounting options. NOTE: Desk Clamp
mounting option is only suitable for displays in side
by side configuration.
• Bolt Through
Suits desktop thicknesses of 12mm - 40mm (0.5”-1.5”)
• Desk Clamp
Suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”)
B Range of Movement
Included Hardware:
All fasteners and mounting hardware are included.
Tools Required:
Power drill, 9mm (³/
”) drill bit, Phillips Head screwdriver.
8
Cable Management:
Cable management system includes cable slot and cable
management clips.
Colour:
Polished Silver.
Warranty: 10 years limited
IMPORTANT:
Please read the Installation Instructions before
mounting Visidec Focus Articulated Arm Double
1
4
1 +/-70° tilt adjustment
2 +/-95° portrait/landscape adjustment
3 180° pan adjustment
4 360° articulation of arms
5 240° rotation at shoulder
2
5
3
6
NOTE:
The back to back display configuration shown can
only be used in conjunction with the Bolt Through
mounting option.
6 315mm (12.5”) height adjustment range
The range of movement shown here applies to both
arms of Visidec Focus Articulated Arm Double.
Page 2
C Overall Dimensions
Maximum distance
to centre of display
same as
9
centre of pole
7
4
8
1
Height of pole
5
6
D The FlexiStar™ mechanism
VESA Mounting Plate
in 100mm x 100mm position
2
3
NOTE: The back to back display configuration shown
(left) can only be used inconjunction with
the Bolt Through mounting option.
The range of movement shown here applies to both
arms of Visidec Focus Articulated Arm Double.
467mm (18.39”) maximum
9
1
68mm (2.68”)
2
150mm (5.91”)
3
195mm (7.68”)
4
54mm (2.5”)
5
99mm (3.89”)
6
68mm (2.68”) minimum
7
39mm (1.5”) diameter of pole
8
440mm (17.32”)
9
or
450mm (17.71”)
when using Desk Clamp
28mm (1.1”)
E Side by side
Max. width
780mm (30.71”)
VESA Mounting Plate
in 75mm x 75mm
position
100mm
75mm
NOTE:
The Visidec Focus Articulated Arm Double
can be configured so that the displays are
positioned side by side.
75mm
100mm
The maximum distance from the pole to the
back of the display will be determined by
the size of the displays.
F Desk Mounting Options
Desk Clamp
Desk Clamp suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”)
39mm
(1.5”)
When positioning displays
side-by-side the
maximum display width
is 780mm (30.71”)
Max.
Bolt Through
Bolt Through suits desktop thicknesses of
12mm - 40mm (0.5” - 1.5”)
8mm
(0.31”)
38mm (1.5”)
75mm
(3”)
12mm (0.5”)
52mm
65mm
(2.56”)
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 19.07.12©
52mm
(2.05”)
(2.05”)
DESK
Loading...