Atdec TH-TVCB-CM Installation manual

1

2

180

o

180

o

360

o

TH-TVCB-CM

Installation Instructions

Camera Shelf Accessory for TH-TVCB Mobile Cart

Component Checklist

HARDWARE

6mm Allen Key
from TH-TVCB

1x Tray Assembly

Allen Key

IMPORTANT INFORMATION:

! IMPORTANT - Install Telehook Ceiling Mount as per installation instruction.

! This product supports a maximum load of 5kg (11lbs.).
! The manufacturer accepts no responsibility for incorrect installation.

Step 1. Check Components

Check you have received all parts against the component checklist and hardware above.

Step 2. Step 3.

2 x M6 Cap Screw

1x Adjustable Pole

Remove Cap

Ensure that the bolts are
Remove existing bolts
using existing 6mm
allen key

aligned with the holes in

the sleeve and the pole

Step 4. Step 5.

Lower the tray into position
and fasten it by turning the
handle

Lower the pole into
position

Note that each joint
can be tightened

1

2

Step 5. Continued

25º

Step 6.

Lift the cap and use
the existing allen key
to tighten or loosen
the arm

Slide clip to release

Installation Complete

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 14.04.13 ©